Firefly Open Source Community

Title: The questions about using PWM. FireprimeS+(RK3128) [Print This Page]

Author: james    Time: 2/21/2017 14:26
Title: The questions about using PWM. FireprimeS+(RK3128)
Fireprime S+ on board
If you check it with the adb shell as shown below, / sys / kernel / class / PWM will not come up here.
What is the problem?
Try to use both PWM0, PWM1, PWM2, and PWM3.
​Reference website : http://wiki.t-firefly.com/index.php/FirePrime/PWM/en
kernel / arch / arm / boot / dts / rk3128-fireprime.dts:
I added this.
​& Pwm0 {
                Status = "okay";
        };
& Pwm1 {
                Status = "okay";
        };
& Pwm2 {
                Status = "okay";
        };
& Pwm3 {
                Status = "okay";
        };
Please make sure you have another file to edit.
​please reply.







Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1