|
|
Posted at 8/30/2017 12:31:16
2#
Hi mara, I appreciate your interest, I followed your instructions this is what I get on the serial console
DDR Version 1.08 20170320
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x32817281, stride = 0x9
OUT
Boot1: 2017-04-07, version: 1.06
CPUId = 0x0
ChipType = 0x10, 1832
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
SdmmcInit=0 0
BootCapSize=0
UserCapSize=7580MB
FwPartOffset=2000 , 0
StorageInit ok = 159948
LoadTrustBL
No find bl30.bin
No find bl32.bin
RunBL31 0x10000
WARNING: plat_rockchip_comm_sram_init:code:ff8d9000, 67000, ef0
NOTICE: BL31: v1.2(debug):b995f80
NOTICE: BL31: Built : 16:53:56, Nov 7 2016
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: boot cpu mask: 0
INFO: Vesion: 2016.0.01
INFO: plat_rockchip_pmu_init(1211): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-rc2-00137-g2629a21e20-dirty (Aug 20 2017 - 21:08:43 +0300)
Model: Firefly-RK3399 Board
DRAM: 2 GiB
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
*** Warning - bad CRC, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Firefly-RK3399 Board
Net:
Error: ethernet@fe300000 address not set.
No ethernet found.
Hit any key to stop autoboot: 0
** First descriptor is NOT a primary desc on 0:1 **
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
1324 bytes read in 14 ms (91.8 KiB/s)
## Executing script at 00500000
U-boot loaded from SD
25 bytes read in 16 ms (1000 Bytes/s)
71666 bytes read in 18 ms (3.8 MiB/s)
20303880 bytes read in 1307 ms (14.8 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 000000007df12000, end 000000007df267f1 ... OK
Starting kernel ...
<hit enter to activate fiq debugger>
I pressed enter and nothing happens, it's stuck.
I think it's a problem on the board, at first I thought it could be a problem with the emmc, that's why I tried to boot slackware from the SD. When I restored the emmc and boot from it , either with android or Ubuntu the system is stuck. |
|
