Firefly Open Source Community

Title: upgrade_tool ubuntu1604 fail [Print This Page]

Author: Roman Time: 4/19/2017 16:19
Title: upgrade_tool ubuntu1604 fail
Good day I try to update firmware using upgrade tool but can't
my u-boot is U-Boot 2014.10-RK3399-06-02280-g1466a27 (Feb 24 2017 - 16:13:37)
I press recovery key and make procedure, firmware loads but I've got error message.

i@spir:~/work/rk3399/Linux_Upgrade_Tool_v1.24$ sudo ./upgrade_tool uf Firefly-rk3399_xubuntu1604_20170411172252.img
Loading firmware...
Support Type:RK330C FW Ver:6.0.01 FW Time:2017-04-11 17:04:07
Loader ver:1.05 Loader Time:2016-12-03 15:46:59
Download Firmware Fail

Copy the code

after that I have kernel panic that can't find rootfs.

Author: Roman Time: 4/19/2017 17:10
Update I download firmware but have tons of errors on sudo apt-get update.
So this image not usable at now.

Author: isle Time: 4/20/2017 09:42
what errors?

Author: Roman Time: 4/20/2017 16:29
dpkg corruption.
so I installed version from 20170324 - and sudo apt-get update just works but no mali drivers in system and no 3D acceleration.

Author: isle Time: 4/20/2017 16:53
show the logs.
I think these software errors can be fixed!

Author: Roman Time: 4/20/2017 17:04
About 3D acceleration sorry I run gl version not es version, but with es2 version results is too low with comparing MIQI rk3288 board with 4.11 kernel on same mali r13 drivers.
for comparing terrain 13 fps versus 20 fps on MIQI

Author: isle Time: 4/24/2017 11:42
please with --off-screen

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)