Title: Download boot fail when trying to upgrade firmware [Print This Page] Author: trippelganger Time: 7/12/2017 16:51 Title: Download boot fail when trying to upgrade firmware I have an Xubuntu image from the Google Drive page, and go to Upgrade Firmware in AndroidTool v2.38. When I press upgrade I get "Download Boot Start" and then "Download Boot Fail". I run it in MASKROM mode, as the eMMC is empty.Author: isle Time: 7/13/2017 09:46
Hi,
why your eMMC is empty? did you change the eMMC on the board? be careful with modify the hardware. Author: BCoskun Time: 7/22/2017 09:41
I got the same error when I was following the instruction to upgrade Android 7.1. I am not sure eMMC empty or not the system is in MASKROM mode. So far I couldn't find any instruction how can I fix this mode and return to normal.
Any help appreciated.Author: isle Time: 7/22/2017 09:54 http://wiki.t-firefly.com/index.php/Firefly-RK3399/MaskRom/en
MaskRom mode is the bottom line preventing the device from bricking. and make sure the tools version as same as the wiki's.Author: BCoskun Time: 7/22/2017 10:28 Last edited by BCoskun In 7/22/2017 10:31 Editor
I am not sure if the upgrade process is deleted Linux OS or not. If not there is no option in new Andorid 7.1 version that allows me to switch the OS. Any suggestion?
--- Instruction I followed to continue during Andorid Upgrade to recover MaskRom Mode---
Keep device power on.
Use micro USB Type-C cable to connect host and device together.
Press and hold RECOVERY key.
Shortly press RESET key.
Release RECOVERY key.
Note:If device still can not be found after pressing "RESET", then try this: long press "PWRKEY" after short pressing of "RESET", before finally releasing "RECOVERY".Author: isle Time: 8/2/2017 10:29
Oh, We did not support the "dual OS Switch" in new firmware.
Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)