Firefly Open Source Community

Title: AIO 3399J Play Store registration [Print This Page]

Author: Benzduino Time: 10/3/2018 16:38
Title: AIO 3399J Play Store registration
Last edited by Benzduino In 10/3/2018 16:39 Editor

Hi Everyone
I am a French New B so please bare patience with me!
I've been trying to figure out a way to get Google Services working on the RK 3399's
And my first success was only to get the board registered on the play store using my Google account!
Further more, previous incompatible apps can now be installed, but Google framework keep stop/starting in a loop!

I realised the board has no Android Google Framework Service ID, what every android device has, in order to get the Google apps to work seamlessly!

Is it a Firmware or a board issue?

Any light would be highly appreciated!!

BY THE WAY IT'S A SHAME CALLING A BOARD A DEV BOARD AND YOU CAN'T EVEN RUN GMS

Author: leung先森 Time: 10/8/2018 11:04
Station OS support Google Framework. You can try it .
If i can , i will add it into the Android7.1.2 OS later.

Author: leung先森 Time: 10/13/2018 17:53
http://bbs.t-firefly.com/forum.p ... tid=2431&extra=
Try it

Author: Benzduino Time: 10/15/2018 04:35

leung先森 Posted at 10/13/2018 17:53
http://bbs.t-firefly.com/forum.php?mod=viewthread&tid=2431&extra=
Try it

Thank you trying it now,
I will get back to you if needed

Author: Benzduino Time: 10/15/2018 06:57
Still doesn't work!!
Play Store doesn't proceed after cliking on sign in
and there is a loop when trying to sign an account in the settings

Author: leung先森 Time: 10/15/2018 09:25

Benzduino Posted at 10/15/2018 06:57
Still doesn't work!!
Play Store doesn't proceed after cliking on sign in
and there is a loop when ...

I had tested it, everything gone be okay with sign in and account in settings were fine too.

Author: Benzduino Time: 10/15/2018 15:15
Ok will send a video

Author: Benzduino Time: 10/15/2018 15:40
Last edited by Benzduino In 10/15/2018 21:55 Editor

leung先森 Posted at 10/15/2018 09:25
I had tested it, everything gone be okay with sign in and account in settings were fine too.

Hello leung先森

Here are to short videos so you can see for your self !
Video 1 https://mega.nz/#!TuJ0HAgJ!yy-0eXcWtlgcDH-QeTC2Ok8urpYRIIWo2aO3mORKkRo
Video 2 https://mega.nz/#!KyYQ1KzZ!z8s90lg2b1_iIGpoba9w0L3MIWA9vcJKseaPYlzkLYM

Maybe am I doing something wrong, thanks for your help and time!

Author: leung先森 Time: 10/15/2018 16:09

Benzduino Posted at 10/15/2018 15:40
Hello leung先森

Here are to short videos so you can see for your self !

You better send me a logcat .
And your link were your own folder , not sharing link.
I can not access it.

Author: Benzduino Time: 10/15/2018 21:27
What do you mean by logcat, from system folder?

Author: Benzduino Time: 10/15/2018 21:53

leung先森 Posted at 10/15/2018 16:09
You better send me a logcat .
And your link were your own folder , not sharing link.
I can not a ...

Here you are for the logcat
https://mega.nz/#!XzJ3SKBQ!Ul3sf ... k2P6uEPlAAAAAAAAAAA

I have also updated the video links

Author: Benzduino Time: 10/15/2018 23:54
I have figured out what was wrong!
When installing firmware for first time, there is a Google immediate update happening
Since I am located in France, i though this update was preventing me from signing in, so
I've try to sign in before update and it worked! so now what is version of GMS you used

Author: leung先森 Time: 10/16/2018 14:48

Benzduino Posted at 10/15/2018 23:54
I have figured out what was wrong!
When installing firmware for first time, there is a Google imme ...

You can see from settings -> apps , locate google app to check the App info.

Author: Benzduino Time: 10/16/2018 17:35
Ok thank you so much leung先森!
Now since I have your attention is there any way to have a custom boot logo animation, or perhaps just a simple boot logo!
Thanks for your support

Author: leung先森 Time: 10/16/2018 17:53
Last edited by leung先森 In 10/16/2018 17:55 Editor

Benzduino Posted at 10/16/2018 17:35
Ok thank you so much leung先森!
Now since I have your attention is there any way to have a custom b ...

Just change the kernel/logo.bmp .
Resolution limit 1080p or lower , the photo of property is better to match up logo.bmp.

Author: Benzduino Time: 10/16/2018 18:04
Ok thanks, do I have to extract kernel or a simple file explorer will do?

Author: leung先森 Time: 10/16/2018 18:08

Benzduino Posted at 10/16/2018 18:04
Ok thanks, do I have to extract kernel or a simple file explorer will do?

No , you need to complie source code for image.
Try to use forum search.

Author: Benzduino Time: 10/16/2018 18:11
Ok I get it Thanks

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)