Firefly Open Source Community

Title: Full training error [Print This Page]

Author: wizama    Time: 6/13/2019 18:25
Title: Full training error
Last edited by wizama In 6/13/2019 18:27 Editor

Hello,

I just try to upgrade my AIO3399C board with a home made firmware that i compiled without modifying anything (for trying) using linux and Linux_Upgrade_Tool 27 provided with sources.

Now, i can not boot anymore, and the board is completely out of order

Here are the debug logs when I try to boot:

  1. Welcome to minicom 2.7.1

  2. OPTIONS: I18n
  3. Compiled on Aug 13 2017, 15:25:34.
  4. Port /dev/ttyUSB0, 12:15:52

  5. Press CTRL-A Z for help on special keys

  6. DDR Version 1.08 20170320
  7. In
  8. Channel 0: LPDDR4,50MHz
  9. CS = 0
  10. MR0=0x98
  11. MR1=0x0
  12. MR2=0x0
  13. MR3=0x0
  14. MR4=0x3
  15. MR5=0xFF
  16. MR6=0x2
  17. MR7=0x0
  18. MR8=0x8
  19. MR9=0x0
  20. MR10=0x0
  21. MR11=0x0
  22. MR12=0x4D
  23. MR13=0x0
  24. MR14=0x4D
  25. MR15=0x0
  26. MR16=0x0
  27. MR17=0x0
  28. MR18=0x0
  29. MR19=0x0
  30. MR20=0x0
  31. MR21=0x0
  32. MR22=0x0
  33. MR23=0x0
  34. MR24=0x8
  35. MR25=0xFF
  36. CS = 1
  37. MR0=0x19
  38. MR1=0x1A
  39. MR2=0x1B
  40. MR3=0x1C
  41. MR4=0x1D
  42. MR5=0x1E
  43. MR6=0x1F
  44. MR7=0x20
  45. MR8=0x21
  46. MR9=0x22
  47. MR10=0x23
  48. MR11=0x24
  49. MR12=0x25
  50. MR13=0x26
  51. MR14=0x27
  52. MR15=0x28
  53. MR16=0x29
  54. MR17=0x2A
  55. MR18=0x2B
  56. MR19=0x2C
  57. MR20=0x2D
  58. MR21=0x2E
  59. MR22=0x2F
  60. MR23=0x30
  61. MR24=0x31
  62. MR25=0x32
  63. full training error!!!
  64. Cap error!
  65. Channel 1: LPDDR4,50MHz
  66. CS = 0
  67. MR0=0x98
  68. MR1=0x0
  69. MR2=0x0
  70. MR3=0x0
  71. MR4=0x1
  72. MR5=0xFF
  73. MR6=0x2
  74. MR7=0x0
  75. MR8=0x8
  76. MR9=0x0
  77. MR10=0x0
  78. MR11=0x0
  79. MR12=0x4D
  80. MR13=0x0
  81. MR14=0x4D
  82. MR15=0x0
  83. MR16=0x0
  84. MR17=0x0
  85. MR18=0x0
  86. MR19=0x0
  87. MR20=0x0
  88. MR21=0x0
  89. MR22=0x0
  90. MR23=0x0
  91. MR24=0x8
  92. MR25=0xFF
  93. CS = 1
  94. MR0=0x19
  95. MR1=0x1A
  96. MR2=0x1B
  97. MR3=0x1C
  98. MR4=0x1D
  99. MR5=0x1E
  100. MR6=0x1F
  101. MR7=0x20
  102. MR8=0x21
  103. MR9=0x22
  104. MR10=0x23
  105. MR11=0x24
  106. MR12=0x25
  107. MR13=0x26
  108. MR14=0x27
  109. MR15=0x28
  110. MR16=0x29
  111. MR17=0x2A
  112. MR18=0x2B
  113. MR19=0x2C
  114. MR20=0x2D
  115. MR21=0x2E
  116. MR22=0x2F
  117. MR23=0x30
  118. MR24=0x31
  119. MR25=0x32
  120. full training error!!!
  121. Cap error!
  122. ERR
Copy the code


What can i do to make it work ?
Why flashing a board bricks it ?




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1