Firefly Open Source Community

Title: recover bootloader... [Print This Page]

Author: Stephen Time: 9/12/2015 10:15
Title: recover bootloader...
Hi

My FirePrime board is broken..
So. I want to recover bootloader using MaskRom mode.
I try to bellow step... But it's fail ..

1. shot H/W two point...

2. writing the parameter
sudo upgrade_tool di -p FirePrime_boot.txt # flash parameter

3. chceking serial log

DDR Version 2.00 20140828
In
1A1A1F20 0
1A1A2929 3
LPDDR2
29292929 F
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB
mach:14
OUT
2.18 0
ChipType = 9
No.1 FLASH ID:ad de 14 a7 42 4a

other question.. why don't support compiled update.img ? (URL is broken.)

Thx...

Author: busybee Time: 9/12/2015 11:08
Firmware download link is fixed, thank you

If you want to recovery bootloader, either:
- Flash the whole image again:
sudo upgrade_tool uf /path/to/update.img

- Update the bootloader
sudo upgrade_tool DB /path/to/loader.bin # this download the loader to the board
sudo upgrade_tool UL /path/to/loader.bin # this shall upgrade to loader of the board

Author: Stephen Time: 9/12/2015 15:08
Thanks. your reply

I soloved this problem.

thx.

Author: newold Time: 9/15/2015 17:08
Hi, Stephon!
I have the same problem as you.
Can you tell me point that shot H/W two point(1. shot H/W two point...)?

Author: zhansb Time: 9/16/2015 11:04
@newold, refer to attachment

fireprime_maskrom.png (62.74 KB, Down times: 159)

Author: newold Time: 9/16/2015 12:02

zhansb Posted at 9/16/2015 11:04
@newold, refer to attachment

Thanks. your reply

I soloved this problem.

Have a nice day!

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)