Recomended Level converter Digital and Analog

Zoidiano0

hey guys im wonderin if is there any recomenden level translator to us with the fireduino due the analog inputs only tolerate 2.5v MAX but i have some level trasnlation to use instead of resistors and some ic to make the connection with digital to 3.3v and 5v tolerant devices

thanks!

satolas

Hello Zoidiano,

I'm using that one : Bi-Directional LevelConverterModul 8 canals 1,2...3,6V <> 5V www.ti.com/lit/ds/symlink/txs0108e.pdf
Its to convert 3V from Fireduino Pins to 5V.

Cheers :-)

satolas

Hello, just to let the community know about that question :
I used the level converter mentioned above on a project with High-Frequency pulses (for stepper motors) and I had steploss errors.
Wich means that my steppers motors were moving but not exactely doing the distance they should at very high rpm.

So I found a solution by using another level shifter wich is the : 74HCT 244 N (texas instruments)
I bought one from Segor electronics : http://www.segor.de/#Q=74HCT244N&M=1

74HCT 244 N (DATASHEET) : https://edg.uchicago.edu/~bogdan/dirac/doc/parts/sn74hct244.pdf

This one seems to be accurate enough and I'm not experiencing any steploss error anymore :-)
Cheers