RK3399 M.2 SATA

friism

I have a similar problem: I've inserted a M.2 -> SATA converter [1] and attached a sata harddrive, but the drive is not showing up in Linux. I've looked at `lsblk` and `lspci` (the latter results in an error) with no luck.

[1]: http://www.microsatacables.com/m ... apter-ngff-b-m-7pin

friism

BiatuAutMiahn Posted at 4/12/2017 11:00
i think I saw that the kernel needs to be configured for support in another thread

Do you have a link?

friism

I just tried with the latest beta image: https://drive.google.com/drive/f ... gAqAN0hWd1FMN1Zjb0k

... still no dice.

Do I have to use the official adapter board? http://shop.t-firefly.com/goods.php?id=52

Or do I have to use a different kernel to get pci/m.2 support?

friism

I just tried again with the latest `Firefly-rk3399_xubuntu1604_201704271809` image - it still doesn't work...

friism

Nope, there's no such device as `/dev/block/nvme0n1p1`

friism

1. firefly@firefly:~/Desktop$ dmesg | grep pci
   
2. [    0.270194] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)
   
3. [    0.270341] vcc3v3_pcie: no parameters
   
4. [    0.270373] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 0uV
   
5. [    0.366993] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
   
6. [    0.367002] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
   
7. [    0.367027] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
   
8. [    0.367262] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
   
9. [    0.367273] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply property in node /pcie@f8000000 failed
   
10. [    0.367286] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
    
11. [    0.367858] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
    
12. [    0.367868] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
    
13. [    0.367878] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
    
14. [    0.368435] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
    
15. [    0.368444] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
    
16. [    0.368453] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
    
17. [    0.910817] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
    
18. [    0.911459] rockchip-pcie: probe of f8000000.pcie failed with error -110
    
19. [    1.053521] ehci-pci: EHCI PCI platform driver
    
20. [    1.068234] ohci-pci: OHCI PCI platform driver
    

Copy the code

friism

1. ls /dev/block/
   
2. 179:0  179:1  179:2  179:3  179:32  179:4  179:5  179:6  179:64  179:96  1:0  1:1  1:10  1:11  1:12  1:13  1:14  1:15  1:2  1:3  1:4  1:5  1:6  1:7  1:8  1:9  254:0  7:0  7:1  7:2  7:3  7:4  7:5  7:6  7:7
   

Copy the code

friism

Will this work if I get your m.2 to SATA connector? http://shop.t-firefly.com/goods.php?id=52 The only reason I didn't get that one was that shipping was expensive.

friism

rk3399 only support nvme ssd..

...ok - why then is Firefly selling a SATA adapter? http://shop.t-firefly.com/goods.php?id=52

friism

So you're using the adapter from the Firefly shop? Also, what instructions do you use to build a normal kernel?