New to Firefly RK3399 trying to replace android with linux

leung先森 · Posted at 4/18/2018 09:26:37

leung先森 · Posted at 4/18/2018 14:54:23

ericswanson1020 Posted at 4/18/2018 12:14
Yes, I have been there many times. Still confused. Can you answer any of my above questions?

Al ...

read chaptor of the "Flash Image" http://en.t-firefly.com/doc/product/info/263.html
download the ubuntu firmware from here http://en.t-firefly.com/doc/download/index/id/3.html
The 12v DC power must be used for the board running normally.

I do not recommand use MAC to do these stuff. WinPC or ubuntu will be better.

leung先森 · Posted at 4/19/2018 09:06:53

ericswanson1020 Posted at 4/18/2018 20:06
Thank you for your reply.

I have read that flash image page many times and followed the instruc ...

try to set the board into the Maskrom mode , if it cannot be found by the PC , it must be the hardware broken.

leung先森 · Posted at 4/24/2018 18:03:53

ericswanson1020 Posted at 4/24/2018 01:27
With the USB-C side plugged into the RK3399 and the USB-A side plugged into a new Windows 10 machi ...

the hardware problem , it seems they make a little mistake , you can send back for fix it.

leung先森 · Posted at 4/24/2018 18:04:52

kempj Posted at 4/24/2018 16:53
I have the same issue ericswanson1020.

Nothing I do will get this device discovered by Windows or ...

the first thing is let the PC recognize the RK3399.
t