Firefly Open Source Community

   Login   |   Register   |
New_Topic
Print Previous Topic Next Topic

New to Firefly RK3399 trying to replace android with linux

23

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
23

New to Firefly RK3399 trying to replace android with linux

Posted at 4/18/2018 06:47:46      View:9753 | Replies:14        Print     [Copy Link] 1#
I have a new Firefly RK3399 which I am trying to replace Android with whatever the best version of Linux is for this board.  (What is the best version of Linux (with GUI) for this board?)

I do not see any clear instructions on how to do this. I believe I am supposed to flash the unit to accomplish this task

To flash it, I believe I am supposed to connect the RK3399 via USB-C on the 3399 to a USB-A port on another computer. I am trying to connect it to a Macintosh with a Windows 10 virtual machine running. Neither the Mac sees the USB device (the 3399) nor does the Android Tool on Windows. When I press the Recovery button and the Reset button, the 3399 goes into Android Recovery mode.

I also tried connecting to a Dell PC running Cent OS, but when I saw the instructions were for Ubuntu or Debian, I stopped.

Am I supposed to have the 12vdc power connected when I do this?

Can anyone help?

Thanks,
Eric
Reply

Use props Report

23

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
23
Posted at 4/18/2018 12:14:13      2#
leung先森 Posted at 4/18/2018 09:26
http://en.t-firefly.com/doc/product/index/id/3.html
take  a look

Yes, I have been there many times. Still confused. Can you answer any of my above questions?

Also, does the USB cable need to be plugged into a USB-3 port on the host PC (windows) or is USB-2 ok?
Reply

Use props Report

23

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
23
Posted at 4/18/2018 20:06:15      3#
leung先森 Posted at 4/18/2018 14:54
read chaptor of the "Flash Image"  http://en.t-firefly.com/doc/product/info/263.html
download the ...

Thank you for your reply.

I have read that flash image page many times and followed the instructions without success.

I am now trying to connect to a Windows machine with Windows XP and USB 2.0 ports. Any reason that should fail?

The RK3399 displays the Firefly logo then boots into Android Recovery Mode after I press the Recovery button then the Reset button. The Windows PC does not show the RK3399 in Device Manager and the Android Tool (run as Administrator) says "No Devices Found"

Can you help?

Thank you.
Reply

Use props Report

23

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
23
Posted at 4/24/2018 01:27:58      4#
leung先森 Posted at 4/19/2018 09:06
try to set the board into the Maskrom mode , if it cannot be found by the PC , it must be the hard ...

With the USB-C side plugged into the RK3399 and the USB-A side plugged into a new Windows 10 machine's USB 3.0 port, I then short out the two contacts and power the board.

Results: No HDMI output, the blue LED does not light, but still no connection to Windows 10 (nothing shows in Device Manager, Android Tool does not find the board).

Can I return this order for a full refund?

Eric
Reply

Use props Report

23

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
23
Posted at 4/25/2018 21:26:18      5#
kempj Posted at 4/24/2018 16:53
I have the same issue ericswanson1020.

Nothing I do will get this device discovered by Windows or ...

I have the RK3399 4GB/128GB board.

Android Recovery reports version 7.1.2/NHG47K/omg03210924.
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list