Firefly Open Source Community

   Login   |   Register   |

Download error in MASKROM mode

74

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
74
Posted at 4/23/2018 12:43:47     
Last edited by sinjin In 4/24/2018 11:43 Editor

Hi,

I bought AIO-3399J board few days ago, then I tried to download firmware myself.
Using Android Tool (v2.38), I clicked 'EraseFlash' button in Upgrade Firmware tab but then it was failed.
When I turned off and on the board, it was in MASKROM mode, after then I can't do anything (eg, 'EraseFlash' or 'Upgrade' any firmware).
Is my board bricked? Is there any way to recover from this mode?

Thank you in advance.

Best Regards,
Sinjin

AndroidTool_MASKROM.png
Reply

Use props Report

74

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
74
Posted at 4/24/2018 10:46:22     
Last edited by sinjin In 4/24/2018 10:47 Editor

http://en.t-firefly.com/index.php/doc/product/info/id/468.html
I saw the above link, and it described that
it will boot into MaskRom mode, which waits for host to send bootloader code through USB, then runs it, so that bootload can take control again.

I'm wondering that AndroidTool program can send the bootloader image to the board which is in MASKROM mode?
Reply

Use props Report

74

Credits

0

Prestige

0

Contribution

registered members

Rank: 2

Credits
74
Posted at 5/29/2018 14:41:38     
Fortunately, now I can download the firmware on my AIO-3399J board.
What I did that, I installed Linux host and downloaded the firmware using upgrade_tool instead of Android Tool, like below.
sudo upgrade_tool uf rockdev/Image-rk3399_firefly_aio_box/AIO-3399J_Android7.1.2_AIO-3399J_180529.img

※ reference: http://en.t-firefly.com/doc/product/info/437.html
Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list