Firefly Open Source Community

   Login   |   Register   |

How to flash Ubuntu 18.04 Official firmware

5

Credits

0

Prestige

0

Contribution

new registration

Rank: 1

Credits
5
Posted at 4/21/2019 11:09:15     
Hi, I have firefly RK3288 board and found new Ubuntu firmware image on Official Google drive.
One is,
FIREFLY-RK3288-UBUNTU18.04-GPT-20190219-1021.img.tar.gz
Newer is,
FIREFLY-RK3288-UBUNTU18.04-GPT-20190304-1214.img.tar.gz

I tried uncompressing them and flash to my board by AndroidTool v2.58.
At first, enter boot mode, then [EraseFlash] clicked.
Finaly [Upgrade] clicked, flashed it successfully.
Here is log after flash.

11:29:52 595        Layer<2-1-4-3>ownload Firmware Success
11:29:52 602        Layer<2-1-4-3>:Reset Device Start
11:29:53 617        Layer<2-1-4-3>:Reset Device Success

However, my board display only [firefly logo], nothing happen...
Is there any missunderstand of my flashing method?
Please advise.
Reply

Use props Report

939

Credits

0

Prestige

0

Contribution

advanced

Rank: 4

Credits
939
Posted at 4/25/2019 14:40:32     
Hi @Mori99, can you flash back the old firmware?

The last resort is flashing in MaskRom mode.
http://wiki.t-firefly.com/en/Firefly-RK3288/maskrom_mode.html


Reply

Use props Report

You need to log in before you can reply Login | Register

This forum Credits Rules

Quick Reply Back to top Back to list