Hi, follow below steps:
1. As for FW, I was using latest "CAM_CRV1126_1109S2U_UVCC_GPT_20220113_1518-20221031T231709Z-001" - so check your host (Win or Linux) IP should be 172.16.110.1 and Cam dev kit should have address as 172.16.110.2. Also check that you have "adb" working.
2. Download "ArcFaceGo_RV1109_App.zip" from Resources,
3. Unzip it on your host machine and depending your OS choose .cmd or .sh executable script (your Cam should be connected to your host machine at this moment),
4. Script will create two separate instances in two directories: GO and Server,
5. Follow the instruction from "Reame.docx" (translate it if needed) and initialize both instances in sequence as it is in instruction. Restart may be needed - I don't remember exactly
6. Type in browser 172.16.110.6 and you should see Welcome screen and request for setting new access credentials - in chinese
7. To start working with this app you need to authorize it by exporting ID file choosing from menu and sending to authors, they will send you back license key to import into app. I was too lazy and didn't pass this step
8. The End - Enjoy