Firefly-RK3288 Slackware Arm

mara · Posted at 6/2/2018 03:00:41

Last edited by mara In 6/2/2018 04:31 Editor

psycmos Posted at 5/28/2018 03:09
Somebody can do one small tutorial for install it?

flash to mmc:
rkdeveloptool db rk3288_ubootloader_v1.01.06.bin
rkdeveloptool wl 0x40 idbloader.img
rkdeveloptool wl 0x8000 slack-current-arm-miniroot_22May18-4.4.126-firefly_rk3288-build-20180522.img
rkdeveloptool rd

flash to sdcard:
dd if=slack-current-arm-miniroot_22May18-4.4.126-firefly_rk3288-build-20180522.img of=/dev/mmcblk0 bs=10M

mara · Posted at 6/5/2018 03:50:05

new images are available and the instruction is corrected
http://fail.pp.ua/board/2
slack-current-arm-miniroot_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz
slack-current-arm-xfce_22May18-4.4.132-firefly_rk3288-build-20180604.img.tar.xz

mara · Posted at 2/11/2019 03:43:15

Last edited by mara In 2/11/2019 03:47 Editor

sdcard release
README.TXT
update kernel 4.19.20
slack-current-arm-miniroot_04Jan19-4.19.20-firefly_rk3288-build-20190210.img.xz
slack-current-arm-miniroot_04Jan19-4.19.20-firefly_rk3288-build-20190210.img.xz.md5

installation on a sdcard
Unpack the IMAGE file and record by running the following on the SD card
( /dev/mmcblk0 = your sd card device ):
dd if=slack-current-*-miniroot_*-build-*.img of=/dev/mmcblk0 bs=1M
or
xzcat slack-current-*-miniroot_*-build-*.img.xz > /dev/mmcblk0