Firefly-RK3399 slarm64 (aarch64 unofficial slackware)
Last edited by mara In 11/14/2020 05:51 Editorinfo: http://fail.pp.ua/board/75
first release only flash to MMC
howto:
1. download all http://dl.fail.pp.ua/slackware/firefly-rk3399/legacy/
2. download rkdeveloptool upgrade_tool
3. unpack Linux_Upgrade_Tool_v1.21.zip, upgrade_tool must be at the root of the image
4. place the board in Loader Mode
5. execute script ./flash_mmc.sh :victory: Added acceleration for X.Org
mpv --vo xv plays 1080p, on the CPU load to 35% info: http://fail.pp.ua/board/75
release flash to SDCARD
1. The bootloader of the system is written to the image
2. mainline u-boot - U-Boot 2017.09-rc1-00110-gfe84c48eeb-dirty (Aug 06 2017 - 15:29:44 +0300)
howto:
1. download all http://dl.fail.pp.ua/slackware/firefly-rk3399/legacy/
2. /dev/mmcblk0 - §åour memory card
dd if=slack-current-miniroot_24Jul17-4.4.71-firefly_rk3399-build-20170806.img of=/dev/mmcblk0 bs=1M
dd if=slack-current-xfce_24Jul17-4.4.71-firefly_rk3399-build-20170806.img of=/dev/mmcblk0 bs=1M Good, thanks for sharing thanks Last edited by mara In 8/27/2017 02:32 Editor
0. images from sdcard
1. update kernel 4.4.77
2 To flash a new loader, you need to convert the board into a maskrom
boot from eMMC and clean boot sector: dd=/dev/zero of=/dev/mmcblk1 bs=32767 count=1
flash uboot to mmc:./rkdeveloptool db rk3399_loader_v1.08.106.bin
./rkdeveloptool wl 0x40 idbloader.img
./rkdeveloptool wl 0x4000 uboot.img
./rkdeveloptool wl 0x6000 trust.img
3. after flash uboot transfer sd -> mmc, run setup after booting hi, can't find flash_mmc.sh script where is it located?
cheers . Last edited by mara In 8/27/2017 02:58 Editor
hi nadsat,
flash_mmc.sh is unnecessary, §ê corrected the instruction.
for transfer to eMMC you need to run setup or setup.sh after booting from SD
And flash the loader as described above thanks !!!