Title: Fan connection [Print This Page] Author: SS* Time: 3/27/2017 07:40 Title: Fan connection Hi,
I noticed in my package for Firefly-RK3399 Plus, it also has a fan with this. Does this have to be connected? I see videos and screenshots without this fan used. Would the CPU get too hot without this? What if always running at max 100% on CPU?
Also the short cables connecting this fan blocks the way for one of the mipi ports closest to the fan.
Separate, how do you connect USB to UART Module to this board? Author: isle Time: 3/27/2017 10:25
Hi
Hi ,the rk3399 have a over-temperature protection,when the cpu is too hot,the rk3399 will run slower,
so if always running 100%, we suggest you to connect the fan,
the UART debug : http://wiki.t-firefly.com/index. ... 399/Serial_debug/enAuthor: korinel Time: 3/28/2017 02:56
Is there any way to have the fan only spin up when needed? It's quite a loud fan, and it clearly isn't needed most of the time, but it seems to be running at full speed all of the time on Linux.Author: isle Time: 3/28/2017 09:24
Yes£¬there is a guy to made it work: http://developer.t-firefly.com/f ... hlight=%B7%E7%C9%C8Author: korinel Time: 4/1/2017 02:50
So there is no way to vary the speed of the fan via the on-board 3-pin controller? Is this due to a lack of kernel support or a hardware limitation? Author: isle Time: 4/5/2017 10:23
hardware limitation
Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)