Title: Board not started - rebooting forever [Print This Page] Author: fpgamcu Time: 12/29/2017 07:57 Title: Board not started - rebooting forever Board rebooting forever with next messages on UART:
DDR Version 1.08 20170320
In
soft reset
SRX
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
OUT
Boot1: 2017-03-07, version: 1.06
CPUId = 0x0
ChipType = 0x10, 1899
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
SdmmcInit=0 20
StorageInit ok = 66603
LoadTrustBL
No find bl30.bin
No find bl32.bin
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):55aa0b4
NOTICE: BL31: Built : 16:55:03, Mar 31 2017
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: boot cpu mask: 0
WARNING: pmu_power_domain_ctr: 5, 1, error!
INFO: plat_rockchip_pmu_init(1089): pd status 1e
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
Author: leungÏÈÉ Time: 12/29/2017 09:50
Try the firmware newest.Author: fpgamcu Time: 12/29/2017 19:22
I tried to use next android 7 firmware Firefly-RK3399_Android7.1.1_MP_170829.img but result is the same.Author: leungÏÈÉ Time: 1/8/2018 17:45
fpgamcu Posted at 12/29/2017 19:22
I tried to use next android 7 firmware Firefly-RK3399_Android7.1.1_MP_170829.img but result is the s ...
It maybe hardware problemAuthor: IMO-0117 Time: 5/24/2018 16:47
Have you solved this problem?
Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)