Firefly Open Source Community

Title: DM-M10R800 does not work [Print This Page]

Author: eschoi@huvitz.c Time: 8/24/2018 08:27
Title: DM-M10R800 does not work
Last edited by eschoi@huvitz.c In 9/6/2018 09:58 Editor

I connected DM-M10R800 LVDS LCD with AIO-3399J Board.
and powered up. and booting... but LVDS LCD did not work.
No response. what do I check?

Author: leung先森 Time: 8/24/2018 09:21
http://wiki.t-firefly.com/zh_CN/AIO-3399J/module_display.html#id4

Author: eschoi@huvitz.c Time: 8/24/2018 14:36
thanks.. can I use LCD with Linux ubuntu?
Is the command same with android?

Author: eschoi@huvitz.c Time: 8/24/2018 19:11
I hope Linux ubuntu Image that supports LVDS LCD display funtion

Author: leung先森 Time: 8/27/2018 10:55
Last edited by leung先森 In 8/27/2018 10:56 Editor

eschoi@huvitz.c Posted at 8/24/2018 19:11
I hope Linux ubuntu Image that supports LVDS LCD display funtion

Linux Image will be released. Be patient .You can do it yourself. Just use the dts rk3399-firefly-aio-3399j-lvds.dts

Author: eschoi@huvitz.c Time: 9/5/2018 10:48

leung先森 Posted at 8/27/2018 10:55
Linux Image will be released. Be patient .You can do it yourself. Just use the dts rk3399-firefl ...

I tried with command below
make rk3399-firefly-aio-linux-lvds.img -j4
but no response, no backlight, no display
what can I do next?

Author: leung先森 Time: 9/5/2018 15:12

eschoi@huvitz.c Posted at 9/5/2018 10:48
I tried with command below
make rk3399-firefly-aio-linux-lvds.img -j4
but no response, no backli ...

rk3399-firefly-aio-linux-lvds.rar (7.13 KB, Down times: 4)

Author: eschoi@huvitz.c Time: 9/6/2018 09:56
Last edited by eschoi@huvitz.c In 9/6/2018 09:58 Editor

thanks...I found solutiion..
I need to change PWM default-brightness-level from 200 to 100
and then backlight was turned on

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)