Firefly Open Source Community

Title: Camera Color [Print This Page]

Author: eschoi@huvitz.c Time: 4/6/2019 10:48
Title: Camera Color
Last edited by eschoi@huvitz.c In 4/6/2019 11:03 Editor

I had ROC-RK3399-PC with OV13850
I sucessed Camera Operation
But Color is not normal
Green color is too strong. what is the error?
I used gst-launch-1.0
gst-launch-1.0 v4l2src device=/dev/video0 io-mode=4 ! videoconvert ! video/x-raw,format=NV12,width=640,height=480 ! autovideosink

Camera_one2.jpg (826.97 KB, Down times: 152)

Author: penguin Time: 4/8/2019 09:23
It is required to use ISP to adjust the color, afaik.

Check this thread and script inside:
http://bbs.t-firefly.com/forum.p ... &extra=page%3D1

Author: eschoi@huvitz.c Time: 4/8/2019 18:23
Last edited by eschoi@huvitz.c In 4/9/2019 15:10 Editor

thanks..I did it
I needed 3 libraries
1.librkisp.so
2.libgstrkisp.so
3.libxcam_core.so.1 and libxcam_rkisp.so.1

and run dual-camera-rkisp.sh

one_rkisp.jpg (242.48 KB, Down times: 154)

Author: twostairs Time: 8/30/2019 19:13
How did you connect the camera to the board? According to the schematic (https://drive.google.com/drive/f ... aXNTOHIxSDRGOFV4RDA) the OV13850 is a 30 pin camera, while the ROC-RK3399-PC only has 24 pin connectors?

Author: penguin Time: 9/4/2019 09:12
There're two models of OV13850 camera, one is 30pin, the other is 24pin.

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)