Firefly Open Source Community

Title: How to flash Ubuntu 18.04 Official firmware [Print This Page]

Author: Mori99 Time: 4/21/2019 11:09
Title: How to flash Ubuntu 18.04 Official firmware
Hi, I have firefly RK3288 board and found new Ubuntu firmware image on Official Google drive.
One is,
FIREFLY-RK3288-UBUNTU18.04-GPT-20190219-1021.img.tar.gz
Newer is,
FIREFLY-RK3288-UBUNTU18.04-GPT-20190304-1214.img.tar.gz

I tried uncompressing them and flash to my board by AndroidTool v2.58.
At first, enter boot mode, then [EraseFlash] clicked.
Finaly [Upgrade] clicked, flashed it successfully.
Here is log after flash.

11:29:52 595 Layer<2-1-4-3>

ownload Firmware Success
11:29:52 602 Layer<2-1-4-3>:Reset Device Start
11:29:53 617 Layer<2-1-4-3>:Reset Device Success

However, my board display only [firefly logo], nothing happen...
Is there any missunderstand of my flashing method?
Please advise.

Author: penguin Time: 4/25/2019 14:40
Hi @Mori99, can you flash back the old firmware?

The last resort is flashing in MaskRom mode.
http://wiki.t-firefly.com/en/Firefly-RK3288/maskrom_mode.html

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)