Firefly Open Source Community

Title: No POE+ Function Support [Print This Page]

Author: YLCHEN Time: 6/3/2019 12:01
Title: No POE+ Function Support
Last edited by YLCHEN In 6/3/2019 12:03 Editor

Hi,

We tested ROC-RK3399-PC POE expansion board. According to its SPEC, it can support POE+ (802.3 AT, output power 30W). But we only saw 15.4W in our test.

Does anyone have the same problem and know the cause?
Thanks very much.

POE2.png (151.22 KB, Down times: 163)

Author: penguin Time: 6/5/2019 17:42
I wonder what powers your ROC-RK3399-PC board?

Author: YLCHEN Time: 6/6/2019 11:47
Thanks for asking. The PoE Gigabit Switch we're using is VigorSwitch P2261. Here's the link for your reference:
https://www.draytek.co.uk/products/legacy/vigorswitch-p2261

Author: YLCHEN Time: 6/17/2019 15:00
Any update on this?

Author: penguin Time: 6/18/2019 14:11
Hi, YLCHEN. IMO, the board is served as power consumed device, requesting 15.4W.
Anything wrong about this?

Author: YLCHEN Time: 6/25/2019 13:34

penguin Posted at 6/18/2019 14:11
Hi, YLCHEN. IMO, the board is served as power consumed device, requesting 15.4W.
Anything wrong abo ...

Thanks for the reply.
We think the POE expansion board supports POE+ (30W) so the "Power Requested" and "Power Allocated" showed on POE Gigabit Switch should be 30W, instead of 15.4W.

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)