Firefly Open Source Community

Title: Full training error [Print This Page]
Author: wizama    Time: 6/13/2019 18:25
Title: Full training error
Last edited by wizama In 6/13/2019 18:27 Editor

Hello,

I just try to upgrade my AIO3399C board with a home made firmware that i compiled without modifying anything (for trying) using linux and Linux_Upgrade_Tool 27 provided with sources.

Now, i can not boot anymore, and the board is completely out of order

Here are the debug logs when I try to boot:

  2. Welcome to minicom 2.7.1

  4. OPTIONS: I18n
  5. Compiled on Aug 13 2017, 15:25:34.
  6. Port /dev/ttyUSB0, 12:15:52

  8. Press CTRL-A Z for help on special keys

  10. DDR Version 1.08 20170320
  11. In
  12. Channel 0: LPDDR4,50MHz
  13. CS = 0
  14. MR0=0x98
  15. MR1=0x0
  16. MR2=0x0
  17. MR3=0x0
  18. MR4=0x3
  19. MR5=0xFF
  20. MR6=0x2
  21. MR7=0x0
  22. MR8=0x8
  23. MR9=0x0
  24. MR10=0x0
  25. MR11=0x0
  26. MR12=0x4D
  27. MR13=0x0
  28. MR14=0x4D
  29. MR15=0x0
  30. MR16=0x0
  31. MR17=0x0
  32. MR18=0x0
  33. MR19=0x0
  34. MR20=0x0
  35. MR21=0x0
  36. MR22=0x0
  37. MR23=0x0
  38. MR24=0x8
  39. MR25=0xFF
  40. CS = 1
  41. MR0=0x19
  42. MR1=0x1A
  43. MR2=0x1B
  44. MR3=0x1C
  45. MR4=0x1D
  46. MR5=0x1E
  47. MR6=0x1F
  48. MR7=0x20
  49. MR8=0x21
  50. MR9=0x22
  51. MR10=0x23
  52. MR11=0x24
  53. MR12=0x25
  54. MR13=0x26
  55. MR14=0x27
  56. MR15=0x28
  57. MR16=0x29
  58. MR17=0x2A
  59. MR18=0x2B
  60. MR19=0x2C
  61. MR20=0x2D
  62. MR21=0x2E
  63. MR22=0x2F
  64. MR23=0x30
  65. MR24=0x31
  66. MR25=0x32
  67. full training error!!!
  68. Cap error!
  69. Channel 1: LPDDR4,50MHz
  70. CS = 0
  71. MR0=0x98
  72. MR1=0x0
  73. MR2=0x0
  74. MR3=0x0
  75. MR4=0x1
  76. MR5=0xFF
  77. MR6=0x2
  78. MR7=0x0
  79. MR8=0x8
  80. MR9=0x0
  81. MR10=0x0
  82. MR11=0x0
  83. MR12=0x4D
  84. MR13=0x0
  85. MR14=0x4D
  86. MR15=0x0
  87. MR16=0x0
  88. MR17=0x0
  89. MR18=0x0
  90. MR19=0x0
  91. MR20=0x0
  92. MR21=0x0
  93. MR22=0x0
  94. MR23=0x0
  95. MR24=0x8
  96. MR25=0xFF
  97. CS = 1
  98. MR0=0x19
  99. MR1=0x1A
  100. MR2=0x1B
  101. MR3=0x1C
  102. MR4=0x1D
  103. MR5=0x1E
  104. MR6=0x1F
  105. MR7=0x20
  106. MR8=0x21
  107. MR9=0x22
  108. MR10=0x23
  109. MR11=0x24
  110. MR12=0x25
  111. MR13=0x26
  112. MR14=0x27
  113. MR15=0x28
  114. MR16=0x29
  115. MR17=0x2A
  116. MR18=0x2B
  117. MR19=0x2C
  118. MR20=0x2D
  119. MR21=0x2E
  120. MR22=0x2F
  121. MR23=0x30
  122. MR24=0x31
  123. MR25=0x32
  124. full training error!!!
  125. Cap error!
  126. ERR
Copy the code


What can i do to make it work ?
Why flashing a board bricks it ?



Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1