Title: UI is not smooth with Linux [Print This Page] Author: Srikrishna Time: 10/15/2019 17:07 Title: UI is not smooth with Linux I am currently using RK3399 with Expansion board and POE image file. But, the Firefly UI doesn't respond to the commands. I have to click on Shutdown atleast 10 times before it activates the command. Has anyone experienced this and is there any solution? Author: c818919 Time: 10/16/2019 11:25
On a Raspberry Pi. Reflash and see if it persists? What about amd x64 Kali?Author: Srikrishna Time: 10/16/2019 18:49
I have reflashed the board several times but it still has the same problem.Author: c818919 Time: 10/17/2019 15:36
slow refresh? commands (ie "command prompt") or GUI?
POE image file? Author: Srikrishna Time: 10/17/2019 16:39
GUI and Development board with POE and Expansion BoardAuthor: c818919 Time: 10/19/2019 11:45
You implied there's an image to use the expansion? And you're saying that running commands is slow? If you boot up and then shut down after a full boot is it still slow? Author: Srikrishna Time: 10/21/2019 15:28
UI is not responsive even after full boot up. Author: c818919 Time: 10/22/2019 05:06
Switch the flash/eMMC and boot up 16.04...persistent? If so, seems hardware related. Put an ssd in the expansion? Brand? What about Wifi/bt e key? Brand? Author: c818919 Time: 10/22/2019 05:08
How is it being powered? Which that up too. If using POE switch to usbc...Author: Srikrishna Time: 10/23/2019 17:50
Could you send me a bootup Image file with Ubuntu 16.04 including kernel?Author: c818919 Time: 10/24/2019 08:51 http://wiki.t-firefly.com/en/NCCS1/images.html#ubuntu-16-04
Grab it from above...
Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)