Firefly Open Source Community

Title: Armbian and LibreELEC for rk3328 [Print This Page]
Author: balbes150    Time: 11/21/2020 00:17
Title: Armbian and LibreELEC for rk3328
Last edited by balbes150 In 3/21/2021 11:47 Editor

Versions of ArmbianTV and Libreelec.

Download links for new versions are now located here.

Dir station_m1


https://yadi.sk/d/GnFmvx9A8ExVDw?w=1

https://users.armbian.com/balbes150/

https://mega.nz/#F!j9QSDQSQ!6WpasOlbZYIInfw6yo4phQ



Using ArmbianTV.

1. Download,
2. Unpack,
3. burn the resulting image to the SD card.
4. Connect the SD card and turn on the power.


Launch LE on M1.

New image Libreelec (unoficcicial)

For M1, I release special images LE (arm and aarch64), there is no need to change anything, the system works immediately after writing to the SD card. All this works with almost all hardware (LAN WiFi HDMI sound, analog sound and remote control) without additional settings.

https://yadi.sk/d/8vNYuuxynz1L0w?w=1




Official

Download the LE image (you can use images for MVR9 or Rock64).

https://libreelec.tv/downloads_new/rockchip/

Unpack and write to SD card.

Download u-boot for M1.

https://yadi.sk/d/XDdYGnvJ4jj3ag?w=1

And write it to the SD card (required after recording the LE image).
Connect the Sd card to M1 and turn on the power.
Works with LAN HDMI and analog audio. WiFi and BT don't work.


The system will start automatically.
Please note that you do not need to erase anything in eMMC \ SPI.
When you disable the SD card, the standard Android from eMMC will work.


Support for media functions.


https://forum.armbian.com/topic/ ... ltimedia-framework/



Author: balbes150    Time: 11/27/2020 15:48
Good news.  

I added support for Station M1 in ArmbianTV (this is a version with improved media capabilities compared to the official Armbian). In the latest version 20201127, almost all hardware works (LAN, WiFi, HDMI and analog audio, remote control, except BT). Starting the system is simple, download, unpack, write to SD card and connect to M1, the system starts automatically.

The images to download are located in subdirectories named ArmbianTV
Author: balbes150    Time: 12/2/2020 20:44
Update ArmbianTV 20201202
Author: balbes150    Time: 12/3/2020 22:01
Armbian 20201203
kernel 5.9.12
expanded the list of USB modules


Added a Libreelec image (20201203) specifically for M1 (rk3328-roc-pc) with the 5.10.0-rc6 kernel. While HW decoding is not working in this image, you need to disable DRM-HW in the settings. SW decoding is sufficient for 720p resolution. Works with remote control, WiFi, HDMI and analog audio.
Author: balbes150    Time: 12/6/2020 01:01
Added the Armbian-legacy version with the rockchip 4.4 kernel.
Images are located in directories with the extension "legacy"in the name.

Author: balbes150    Time: 12/9/2020 16:19
Good news. I added Armbian images with the Legacy core to the site (directories with images with this core have the extension "legacy"). This core is based on rockchip 4.4. for the Buster version, there is a special package "media-buster-legacy-rk3328", which installs HW acceleration and a set of additional packages with KODI, Rockchip Gst Playe, etc., with HW acceleration, including for 4K. After starting the Armbian system (Buster-legacy), you can run the command at this link (in the future, this command will change and it will be easier, small bug in the package name and the author will fix it soon). To start KODI, log out and on the Lightdm login screen, select KODI in the upper-right corner of the session menu and log in. Please note that the sound settings and so on, you need to install in the system before starting KODI (it uses the settings that are set before the user logs out to DE).

https://forum.armbian.com/topic/ ... ents#comment-114824
Author: balbes150    Time: 12/9/2020 16:24
I think this information will also be useful to users.  

https://forum.armbian.com/topic/ ... d-%E2%80%93-how-to/
Author: balbes150    Time: 12/11/2020 17:19
Update Libreelec and ArmbianTV 20201210 kernel 5.10.0-rc7


fixed media package installation for Buster-legacy. To install, you now need to use the command.

sudo apt install media-buster-legacy-rk3328  --install-recommends
Author: balbes150    Time: 12/14/2020 20:11
New test image any DE (XFCE\Mate\KDE etc)

https://yadi.sk/d/fKJzpFMPHRU9QA?w=1
Author: balbes150    Time: 12/16/2020 22:21
20201216 ArmbianTV and Libreelec kernel 5.10.1
Author: balbes150    Time: 12/18/2020 14:20
Support for media functions.

https://forum.armbian.com/topic/ ... ltimedia-framework/
Author: balbes150    Time: 12/23/2020 22:06
New image ArmbianTV-desktop

https://users.armbian.com/balbes ... /ArmbianTV-desktop/
Author: balbes150    Time: 12/29/2020 19:06
Added new versions of armbiantv images with the legacy kernel with different DE (XFCE\Mate\Lxde) for use with the HW video acceleration media script.

https://yadi.sk/d/AXqdcX3K511DoQ?w=1
Author: balbes150    Time: 1/10/2021 02:41
New versions
Armbian 20210109 kernel 5.9.16 \  4.4 (please note that now all versions with the "new" and " old " kernel are in the same directory).
ArmbianTV 20210109 kernel 5.10.5
LibreELEC 20210108 kernel 5.10.5.
Author: balbes150    Time: 1/13/2021 18:54
Good news.  
The new version Libreelec 20210113 for M1 (rk3328)  contains a fix for HW video playback up to 4k.
Author: balbes150    Time: 1/19/2021 19:57
ArmbianTV 20210119 kernel 5.10.8
Libreelec 20210118 kernel 5.10.8
Author: balbes150    Time: 1/20/2021 21:28
Last edited by balbes150 In 1/20/2021 16:31 Editor

Launch LE on M1.

New image Libreelec (unoficcicial)
For M1, I release special images LE (arm and aarch64), there is no need to change anything, the system works immediately after writing to the SD card. All this works with almost all hardware (LAN WiFi HDMI sound, analog sound and remote control) without additional settings.

The name of the images contains rk3328-roc-pc


https://yadi.sk/d/8vNYuuxynz1L0w?w=1

Author: balbes150    Time: 1/23/2021 22:26
Armbian 20210123 kernel 5.10.9
ArmbianTV 20210123 kernel 5.10.9
LE 20210121 kernel 5.10.9
Author: balbes150    Time: 1/23/2021 22:56
Please note that the composition of the images has changed. Now the main versions are Debian-12 Sid and Ubuntu-21.04 Hirsute. For Bullseye and Focal, only minimal server images are used (but you can install DE on them yourself). For those who need other versions of the distribution, I recommend using a self-build of the desired version directly on the device itself. To do this, there is a great video on how to build your distribution versions (your images) directly on M1 and P1.
Author: balbes150    Time: 1/30/2021 17:24
Armbian 20210129 kernel 5.10.11
ArmbianTV 20210129 kernel 5.10.11
LE 20210129 kernel 5.10.11
Author: balbes150    Time: 2/12/2021 13:50
Ver 20210211 Armbian\ArmbianTV  kernel 5.10.15\4.4

LE 20210211 kernel 5.10.15
Author: balbes150    Time: 2/19/2021 19:46
New version of ArmbianTV 20210218.  5.10.17 and 4.4
An important difference.
I made the transition to the startup system using the settings only in the "extlinux.conf" file. You no longer need to use a lot of complex scripts and intermediate text files to describe the startup process. Setting up the DTB is done by editing the line in "extlinux.conf". There you can also change any other startup parameters (disable BOOTFLASH, add a forced binding to the MAC, etc.). That is, you can now use the officially supported parameter format for "extlinux.conf". I also stop publishing versions of Armbian images, because they differ little from the official versions of images from the Armbian download site (i.e. I remove redundant duplication).

Libreelec 20210218 kernel 5.10.17
Author: balbes150    Time: 2/21/2021 20:36
The new version 20210221.
Important information.
The installation mode in eMMC has changed. Now, the standard application "armbian-config" and the corresponding menu items in it are used for installation in eMMC.
Author: balbes150    Time: 2/26/2021 21:00
ArmbianTV Ver 20210226
LE ver 20210226
Author: balbes150    Time: 3/11/2021 22:03
New version ArmbianTV 20210311. Kernel 5.10.22.
Please note. The composition of the images has changed. The name of the download folder has changed.

LE ver 20210311
Author: balbes150    Time: 3/19/2021 23:25
Ver 20210319 ArmbianTV and Libreelec
Author: balbes150    Time: 4/10/2021 15:32
Ver ArmbianTV and Libreelec - 20210409 kernel 5.10.28

Added support for Firefly-rk3328-roc-cc (see the corresponding directory named Renegade)
Author: balbes150    Time: 5/6/2021 14:39
Ver ArmbianTV  20210505 kernel 5.10.34
Author: balbes150    Time: 5/6/2021 22:00
LibreELEC ver 20210505 kernel 5.10.34
Author: balbes150    Time: 5/18/2021 19:51
Ver kernel 5.10.37 (for rk3328-roc-pc and rk3328-roc-cc)
Author: colinli    Time: 6/3/2021 09:11
Last edited by colinli In 6/3/2021 10:27 Editor

Hi @balbes150,
Thanks for your contribution.
I have a network issue after install 5.10.37 in my A5X MAX TV BOX(rk3328), after boot from the sd card, no ip address shows on the login screen and no network light , do I miss something?
I also set the network interfacess and set the eth0 with dhcp and a mac address. Not work.
After put out the SD card, and the TV BOX works fine with network.
Author: balbes150    Time: 6/3/2021 14:10
colinli Posted at 6/3/2021 04:11
Hi @balbes150,
Thanks for your contribution.
I have a network issue after install 5.10.37 in my A5 ...

Sorry, I don't support TV boxes.
Author: balbes150    Time: 6/9/2021 19:57
ArmbianTV er 20210608 kernel 5.10.42 and 5.12.9 Please note that the kernel config has changed significantly.
Libreelec kernel 5.10.42
Author: balbes150    Time: 6/14/2021 21:29
new version of Armbian and Libreelec 20210614 with core 5.10.43.
Author: balbes150    Time: 6/23/2021 13:56
Ver 20210621 Armbian  and Libreelec
fixed analog sound and remote control
Author: balbes150    Time: 7/5/2021 14:24
The ArmbianTV and Libreelec version is 20210703.
Kernel 5.10.47 and 5.12.14.
Fixed the installation of the media package for the Buster-legacy version (kernel 4.4).
Author: balbes150    Time: 7/22/2021 14:38
ver 20210721 kernel 5.10.52 \ 5.12.19
Author: balbes150    Time: 8/19/2021 14:31
ver 20210816 kernel 5.10.59
Author: balbes150    Time: 9/6/2021 18:59
LE ver 20210906 kernel 5.14
Author: balbes150    Time: 9/7/2021 22:58
ArmbianTV ver 20210907 kernel 5.10.62
Author: wanglibing520    Time: 12/4/2021 00:42
colinli Posted at 6/3/2021 09:11
Hi @balbes150,
Thanks for your contribution.
I have a network issue after install 5.10.37 in my A5 ...

Hello; mine is the same as you¡£
Tv-box like you¡£
I am flashing the armbian firmware of z28pro; only Ethernet and WIFI driver can't recognize it; other functions are normal¡£

I can only use the 360USB network card to solve the wireless connection problem.
Ethernet uses USB to Ethernet to solve
360USB2.4G network card is very cheap, $1.57
USB to Ethernet transfer $2.82
Did you solve the wifi Ethernet later?

I brushed this: https://www.armbian.com/z28-pro/


Author: stevere471    Time: 1/13/2026 08:51
Your article is incredibly inspiring, thank you for sharing! I hope the New FCSS_EFW_AD-7.6 exam dumps materials prove useful to you, and they¡¯re free of charge.
Author: grantki428    Time: 1/20/2026 20:01
Die Microsoft GH-200 Zertifizierungspr¨¹fung sit eine Pr¨¹fung, die IT-Technik testet. It-Pruefung ist eiune Website, die Ihnen zum Bestehen der Microsoft GH-200 Zertifizierungspr¨¹fung verhilft. Viele Menschen verwenden viel Zeit und Energie auf die Microsoft GH-200 Zertifizierungspr¨¹fung oder sie geben viel Geld f¨¹r die Kurse aus, um die Microsoft GH-200 Zertifizierungspr¨¹fung zu bestehen. Mit It-Pruefung brauchen Sie nicht so viel Geld, Zeit und Energie. Die zielgerichteten Übungen von It-Pruefung dauern nur 20 Stunden. Sie können dann die Microsoft GH-200 Zertifizierungspr¨¹fung leicht bestehen.
Author: michael273    Time: 2/8/2026 04:04
KoreaDumps의 완벽한 Peoplecert인증 MSP-Practitioner덤프는 고객님이eoplecert인증 MSP-Practitioner시험을 패스하는 지름길입니다. 시간과 돈을 적게 들이는 반면 효과는 십점만점에 십점입니다. KoreaDumps의 Peoplecert인증 MSP-Practitioner덤프를 선택하시면 고객님께서 원하시는 시험점수를 받아 자격증을 쉽게 취득할수 있습니다.
Author: fredros233    Time: yesterday 18:54
Thank you for sharing such a powerful article! Get free access to Pass leader C-S4FCF-2023 dumps exam questions¡ªgood luck to everyone!



Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1