Firefly Open Source Community

Title: NSE5_SSE_AD-7.6 Preparation Store - NSE5_SSE_AD-7.6 Exam Dumps Pdf [Print This Page]
Author: jackgre204    Time: before yesterday 09:00
Title: NSE5_SSE_AD-7.6 Preparation Store - NSE5_SSE_AD-7.6 Exam Dumps Pdf
To buy after trial! Our DumpsActual is responsible for every customer. We provide for you free demo of NSE5_SSE_AD-7.6 exam software to let you rest assured to buy after you have experienced it. And we have confidence to guarantee that you will not regret to buy our NSE5_SSE_AD-7.6 Exam simulation software, because you feel it's reliability after you have used it; you can also get more confident in NSE5_SSE_AD-7.6 exam.
Fortinet NSE5_SSE_AD-7.6 Exam Syllabus Topics:
TopicDetails
Topic 1
  • Rules and Routing: This section addresses configuring SD-WAN rules and routing policies to control and direct traffic flow across different links.
Topic 2
  • SASE Deployment: This domain covers FortiSASE administration settings, user onboarding methods, and integration with SD-WAN infrastructure.
Topic 3
  • Secure Internet Access (SIA) and Secure SaaS Access (SSA): This section focuses on implementing security profiles for content inspection and deploying compliance rules to managed endpoints.
Topic 4
  • Analytics: This domain covers analyzing SD-WAN and FortiSASE logs to monitor traffic behavior, identify security threats, and generate reports.
Topic 5
  • Decentralized SD-WAN: This domain covers basic SD-WAN implementation including configuring members, zones, and performance SLAs to monitor network quality.

>> NSE5_SSE_AD-7.6 Preparation Store <<
Free PDF Quiz 2026 Professional Fortinet NSE5_SSE_AD-7.6: Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator Preparation StoreUp to now, our NSE5_SSE_AD-7.6 training material has won thousands of people¡¯s support. All of them have passed the exam and got the NSE5_SSE_AD-7.6 certificate. They live a better life now. Our study guide can release your stress of preparation for the test. Many candidates just study by themselves and never resort to the cost-effective exam guide. Although they spend lots of time, they fail the NSE5_SSE_AD-7.6 Exam. Their preparations are blind. Our test engine is professional, which can help you pass the exam for the first time. If you can¡¯t wait getting the certificate, you are supposed to choose our NSE5_SSE_AD-7.6 practice test.
Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator Sample Questions (Q36-Q41):NEW QUESTION # 36
Refer to the exhibit.

You want the performance service-level agreement (SLA) to measure the jitter of each member. Which configuration change must you make to achieve this result?
Answer: A
Explanation:
According to theSD-WAN 7.6 Core Administratorstudy guide andFortiOS 7.6 Administration Guide, no configuration change is required to simplymeasurejitter.
* Implicit Measurement: In FortiOS, once a Performance SLA (Health Check) is configured with an Activeprobe mode (as seen in the exhibit with Ping selected), the FortiGate automatically begins calculating three key quality metrics for every member interfaceatency,Jitter, andPacket Loss.
* Visibility: Even without an SLA Target defined, these real-time measurements are visible in theSD- WAN Monitorand via the CLI command diagnose sys virtual-wan-link health-check <SLA_Name>.
* Active Probes: Because the probe mode is set toActiveusing thePingprotocol, the FortiGate sends synthetic packets at the definedCheck interval(500ms in the exhibit). It calculates jitter by measuring the variation in the round-trip time (RTT) between these consecutive probes.
Why other options are incorrect:
* Option B: Adding anSLA targetand defining a jitter threshold is only necessary if you want the SD- WAN engine to makesteering decisionsbased on that metric (e.g., "remove this link from the pool if jitter exceeds 50ms"). It is not required just tomeasurethe jitter.
* Option C: While you can specify participants, the current setting is "All SD-WAN Members," which means it is already measuring jitter for every member.
* Option D:HTTPis an alternative probe protocol, butPing (ICMP)is perfectly capable of measuring jitter and is often preferred for its lower overhead.

NEW QUESTION # 37
What is a key use case for FortiSASE Secure Internet Access (SIA) in an agentless deployment? (Choose one answer)
Answer: A
Explanation:
According to theFortiSASE 7.6 Administration Guideand theFCP - FortiSASE 24/25 Administrator curriculum, the Agentless deployment mode-commonly referred to asSecure Web Gateway (SWG)mode- is a vital component of the Secure Internet Access (SIA) framework.
* Deployment Mechanism: In an agentless deployment, FortiSASE functions as an explicit web proxy.
This is achieved by distributing aPAC (Proxy Auto-Configuration) fileto the user's browser, which instructs the device to send its web traffic to the nearest FortiSASE Point of Presence (PoP).
* Target Use Case: This mode is specifically designed forunmanaged endpoints, such as those used by contractors, partners, or temporary workers, where the organization does not have the authority or capability to install the FortiClient agent.
* Security Capabilities: Even without an agent, FortiSASE applies afull security stackto the redirected traffic. This includesWeb Filtering,Anti-Malware,SSL Inspection, andInline-CASBto secure HTTP and HTTPS sessions.
* Protocol Limitations: Because it relies on proxy settings, this mode is limited to web protocols (HTTP
/HTTPS) and does not inherently secure non-web traffic like ICMP, DNS, or custom TCP/UDP applications unless they are specifically proxied.
Why other options are incorrect:
* Option A: While it provides secure browsing, session isolation (RBI) is a specific feature that can be used in either mode; the defining characteristic of the agentless use case is the proxy-based redirection for unmanaged devices.
* Option C: A PAC file can only secure web traffic (protocols that support proxying), not non-web traffic protocols.
* Option D: Agentless mode is the opposite of requiring FortiClient; ZTNA tags generally require the FortiClient agent to provide the necessary telemetry for tag evaluation.

NEW QUESTION # 38
SD-WAN interacts with many other FortiGate features. Some of them are required to allow SD-WAN to steer the traffic.
Which three configuration elements must you configure before FortiGate can steer traffic according to SD- WAN rules? (Choose three.)
Answer: A,C,D
Explanation:
According to theSD-WAN 7.6 Core Administratorstudy guide and theFortiOS 7.6 Administration Guide, for the FortiGate SD-WAN engine to successfully steer traffic using SD-WAN rules, three fundamental configuration components must be in place. This is because the SD-WAN rule lookup occurs only after certain initial conditions are met in the packet flow:
* Interfaces (Option C):You must first define the physical or logical interfaces (such as ISP links, LTE, or VPN tunnels) asSD-WAN members. These members are then typically grouped intoSD-WAN Zones. Without designated member interfaces, there is no "pool" of links for the SD-WAN rules to select from.
* Routing (Option D):For a packet to even be considered by the SD-WAN engine, there must be a matching route in theForwarding Information Base (FIB). Usually, this is a static route where the destination is the network you want to reach, and the gateway interface is set to theSD-WAN virtual interface(or a specific SD-WAN zone). If there is no route pointing to SD-WAN, the FortiGate will use other routing table entries (like a standard static route) and bypass the SD-WAN rule-based steering logic entirely.
* Firewall Policies (Option A):In FortiOS, no traffic is allowed to pass through the device unless a Firewall Policypermits it. To steer traffic, you must have a policy where theIncoming Interfaceis the internal network and theOutgoing Interfaceis the SD-WAN zone (or the virtual-wan-link). The SD- WAN rule selection happens during the "Dirty" session state, which requires a policy match to proceed with the session creation.
Why other options are incorrect:
* Security Profiles (Option B):While mandatory forApplication-levelsteering (to identify L7 signatures), basic SD-WAN steering based on IP addresses, ports, or ISDB objects does not require security profiles to be active.
* Traffic Shaping (Option E):This is an optimization feature used to manage bandwidth once steering is already determined; it is not a prerequisite for the steering engine itself to function.

NEW QUESTION # 39
The IT team is wondering whether they will need to continue using MDM tools for future FortiClient upgrades.
What options are available for handling future FortiClient upgrades?
Answer: B
Explanation:
According to theFortiSASE 7.6 Feature Administration Guideand the latest updates to theNSE 5 SASE curriculum, FortiSASE has introduced native lifecycle management for FortiClient agents to reduce the operational burden on IT teams who previously relied solely on third-party MDM (Mobile Device Management) or GPO (Group Policy Objects) for every update.
TheEndpoint Upgradefeature, found underSystem > Endpoint Upgradein the FortiSASE portal, allows administrators to perform the following:
* Centralized Version Control: Administrators can see which versions are currently deployed and which "Recommended" versions are available from FortiGuard.
* Scheduled Rollouts: You can choose to upgrade all endpoints or specific endpoint groups at a designated time, ensuring that upgrades do not disrupt business operations.
* Status Monitoring: The portal provides a real-time dashboard showing the progress of the upgrade (e.
g.,Downloading,Installing,Reboot Pending, orSuccess).
* Manual vs. Managed: While MDM is still highly recommended for theinitial onboarding(the first time FortiClient is installed and connected to the SASE cloud), all subsequent upgrades can be handled natively by the FortiSASE portal.
Why other options are incorrect:
* Option B: Manual upgrades are inefficient for large-scale deployments (~400 users in this scenario) and are not the intended "feature-rich" solution provided by FortiSASE.
* Option C: "Onboarding" refers to the initial setup. Re-onboarding every time a version changes would be redundant and counterproductive.
* Option D: While the system canmanagethe upgrade, it is not "auto-upgraded on demand" by the client itself without administrative configuration in the portal. The administrator must still define the target version and schedule.

NEW QUESTION # 40
How does the FortiSASE security dashboard facilitate vulnerability management for FortiClient endpoints?
(Choose one answer)
Answer: B
Explanation:
According to theFortiSASE 7.6 Administration Guideand theFCP - FortiSASE 24/25 Administrator training materials, the security dashboard is a centralized hub for monitoring and remediating security risks across the entire fleet of managed endpoints.
* Vulnerability Summary: The dashboard includes a dedicatedVulnerability summary widgetthat categorizes risks by severity (Critical, High, Medium, Low) and by application type (OS, Web Client, etc.).
* Identifying Affected Endpoints: The dashboard is fully interactive; an administrator candrill down into specific vulnerability categories to view a detailed list ofCVE dataand, most importantly, identify the specificaffected endpointsthat require attention.
* Automatic Patching: FortiSASE supportsautomatic patching for eligible vulnerabilities(such as common third-party applications and supported OS updates). This feature is configured within the Endpoint Profile, allowing the FortiClient agent to remediate risks without requiring the user to manually run updates.
Why other options are incorrect:
* Option A: While it supports automatic patching, it does not do so forallvulnerabilities (only eligible
/supported ones), and it specificallydoescategorize them by severity.
* Option B: The dashboard shows vulnerabilities for theOperating Systemas well as applications, and it allows theadministratorto identify affected endpoints rather than requiring the end-user to check.
* Option C: The dashboard displaysall levels of severity(not just critical) and explicitly allows the viewing of affected endpoints.

NEW QUESTION # 41
......
Our service tenet is to let the clients get the best user experiences and be satisfied. From the research, compiling, production to the sales, after-sale service, we try our best to provide the conveniences to the clients and make full use of our NSE5_SSE_AD-7.6 guide materials. We organize the expert team to compile the NSE5_SSE_AD-7.6 Practice Guide elaborately and constantly update them. To let the clients have a fundamental understanding of our NSE5_SSE_AD-7.6 training materials, we provide the free trials of our NSE5_SSE_AD-7.6 exam questions before their purchasing.
NSE5_SSE_AD-7.6 Exam Dumps Pdf: https://www.dumpsactual.com/NSE5_SSE_AD-7.6-actualtests-dumps.html




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1