素晴らしいL4M7問題と解答一回合格-効果的なL4M7日本語認定対策L4M7有用なテストガイド資料は、最も重要な情報を最も簡単な方法でクライアントに提示するので、L4M7有用なテストガイドを学習するための時間とエネルギーはほとんど必要ありません。クライアントは、テストの学習と準備に20〜30時間しかかかりません。仕事や学習などで忙しい人にとっては、これは良いニュースです。なぜなら、テストの準備に十分な時間がないことを心配する必要がなく、主なことをゆっくりとできるからです。 L4M7学習実践ガイドをご覧ください。ですから、L4M7試験の教材の大きな利点であり、クライアントにとって非常に便利です。 CIPS Whole Life Asset Management 認定 L4M7 試験問題 (Q140-Q145):質問 # 140
Manufacturing resources planning (MRP II) was developed from material requirement planning (MRP). Which of the following is the additional input that is available in MRP II but does not ap-pear in MRP?
A. Bill of materials
B. Master production schedule
C. Inventory records
D. Finance
正解：D
解説：
MRP I was some of the first business software to be widely adopted during the 1970s. Manufacturers sought these systems in order to improve efficiency and accuracy when it came to basic processes such as production scheduling and inventory management.
By the 1980s, manufacturers realized they needed software that could also tie into their accounting systems and forecast inventory requirements. Enter MRP II, which included these integrations in addition to all the capabilities offered by MRP I. Enterprise resource planning (ERP) software features-which we'll cover later on-are included in the following table for comparison.
Reference:
- MRP vs. MRP II: What's the Difference?
- CIPS study guide page 118-119
LO 2, AC 2.3
質問 # 141
The optimum balance in the standard ISO 18602:2013 (Packaging and the environment - Optimi-zation of the packaging system) considers which of the following factors?
1. Environmental impact of losses due to lack of packaging
2. The process for packaging design, including material selection
3. Procedures and requirements for packaging that are suitable for organic recycling
4. Environmental impact of excess packaging
A. 2 and 3 only
B. 1 and 4 only
C. 2 and 4 only
D. 1 and 3 only
正解：B
解説：
ISO 18602:2013 is about Packaging and the environment - Optimization of the packaging system. ISO
18602:2013 specifies requirements and a procedure for assessment of packaging to ensure that the weight or volume of its material content is optimized consistent with the functions of packaging. This is one of several options for reducing the impact of packaging on the environment.
It also provides methodologies and procedures for
- determining the amount and minimization of substances or mixtures hazardous to the environ-ment, and
- determining the amount of four heavy metals (lead, cadmium, mercury, hexavalent chromium) in packaging.
The optimum balance in this standard weighs the environmental impact of losses that may happen with no packaging or inadequate packaging against the environmental impact from excess packag-ing.
The process for packaging design, including material selection, is not part of ISO 18602:2013.
The procedure for applying ISO 18602:2013 is contained in ISO 18601.
質問 # 142
Resevoir Inc runs several oil refineries across the country. These refineries require heavy invest-ment, particularly in maintenance, repair and operating (MRO) inventory. But the inventory turno-ver rate of these MRO items are low, while some items have expired date, which increases the risks of obsolescence. Which of the following methods can address the issues of these MRO items?
A. Vendor-owned stock
B. Larger safety stock
C. Forrester effect
D. Just in case
正解：A
解説：
Where stock turn (inventory turnover) is low and there are potential risks of redundancy or obsolescence, the buying organisation may adopt vendor owned stock. In this system, a supplier (vendor) maintains a stock of items ready to be used at the point of customer consumption. The supplier owns the stock until it is used by the purchaser; only then is the purchaser invoiced for it.
Just in case and larger safety stock would significantly increase the stock level, which may cause redundancy or obsolescence.
Forrester effect (or Bullwhip effect) is a distribution channel phenomenon in which forecasts yield supply chain inefficiencies. It refers to increasing swings in inventory in response to shifts in customer demand as one moves further up the supply chain.
Reference:
LO 2, AC 2.2
質問 # 143
Which of the following materials handling equipment can be used in the warehouse? SelectTHREEthat apply.
A. Electronic data exchange
B. Conveyor system
C. Pallet dollies
D. Forklift
E. Bar coding
正解：B、C、D
質問 # 144
Which of the following are recognised as disadvantages of ERP systems? Select TWO that apply.
A. Excluded inventory records
B. Required intensive employee training
C. High initial investment
D. Lower factory efficiencies
E. Only applied to manufacturing
正解：B、C
解説：
Implementing a full ERP system is not an easy option. They are complex systems and the disad-vantages include the following:
- The installation of the ERP system is costly. ERP consultants are very expensive take approxi-mately 60% of the budget.
- The success depends on the skills and experience of the workforce, including education and how to make the system work properly.
- Resistance in sharing internal information between departments can reduce the efficiency of the software.
- The systems can be difficult to use.
- Change of staff, companies can employ administrators who are not trained to manage the ERP system of the employing company, proposing changes in business practices that are not synchro-nized with the system.
- Having an ERP system has many advantages, but does not guarantee the total success of the company.
Organizational culture, know how to involve staff and anticipate changes that will suffer the organization using this system of administration, are important elements for the completion of the implementation.
- The effectiveness of the ERP system may decrease if there is resistance to share information be-tween business units or departments. Due to strong changes that implementation of the ERP system brings in the culture of work, there may be poorly trained or disinterested in making use of the same staff...
- The benefits of having an ERP system are not presented immediately with the implementation of the software, they will be evident long after the system is running.
- The culmination of the implementation depends on the ability and skill of the workforce, also involves education and training, to make the system is correctly applied.
質問 # 145
......
弊社CIPSが提供する製品は、専門家によって精巧にコンパイルされており、お客様に便利な方法でL4M7学習教材の学習を支援することを目的としたさまざまなバージョンを強化しています。 CIPS Whole Life Asset Management彼らは毎日アップデートをチェックしており、購入日から無料のアップデートサービスが受けられることを保証できます。 CIPS Whole Life Asset Management販売前または販売後にカスタマーサービスを提供するCIPS試験問題について質問や疑問がある場合は、試験資料について質問や疑問がある場合は連絡してください。専門の担当者が解決に役立ちます。 Fast2testのL4M7学習資料の使用に関する問題。 L4M7日本語認定対策: https://jp.fast2test.com/L4M7-premium-file.html
Fast2test L4M7日本語認定対策の学習教材はいろいろな狙いを含まれていますし、カバー率が高いですから、初心者にしても簡単に身に付けられます、CIPS L4M7問題と解答 第三に、オンライン版はすべてのWebブラウザをサポートしているため、すべてのオペレーティングシステムで動作します、CIPS L4M7問題と解答 あなたは最高のトレーニング資料を手に入れました、多くの製品はまだ芽生えているレベルですが、我々のL4M7 CIPS Whole Life Asset Management勉強ガイドは長年の発展の後に好評を得ています、L4M7シミュレーションの実践がすべての責任を果たし、予測可能な結果をもたらす可能性があり、CIPS私たちを確実に信じることを後悔することはありません。
また、オフライン使用をサポートします、なに今の子、Fast2testの学習教材はいろいろな狙いL4M7を含まれていますし、カバー率が高いですから、初心者にしても簡単に身に付けられます、第三に、オンライン版はすべてのWebブラウザをサポートしているため、すべてのオペレーティングシステムで動作します。 ハイパスレートL4M7問題と解答 & 資格試験におけるリーダーオファー & 最新の更新L4M7: CIPS Whole Life Asset Managementあなたは最高のトレーニング資料を手に入れました、多くの製品はまだ芽生えているレベルですが、我々のL4M7 CIPS Whole Life Asset Management勉強ガイドは長年の発展の後に好評を得ています、L4M7シミュレーションの実践がすべての責任を果たし、予測可能な結果をもたらす可能性があり、CIPS私たちを確実に信じることを後悔することはありません。
