Firefly Open Source Community

Title: eth0/eth1 interfaces don't work [Print This Page]

Author: valeriy.simakov Time: 3/23/2022 02:54
Title: eth0/eth1 interfaces don't work
We are using RK3568 with our carrier board (custom board) and factory carrier board (devboard).
For network we are using the same chip RTL8211F-CG as on devboard.
As result, eth0/eth1 interfaces don't work. We can't understand what is a reason.

Linux log files for both carrier boards:
https://drive.google.com/drive/f ... dWsY0YS?usp=sharing

Author: Firefly Time: 3/23/2022 17:14
Hi, we suggest that you can check the Ethernet-related circuit on the board first. Thanks.

Author: 时间的蝴蝶 Time: 3/23/2022 17:41
From the information, the PHY device, RTL8211F-CG, is not recognized.
You need to rule out hardware problems, whether the power supply, reset, and clock of the RTL8211F-CG are normal.
This will provide some help. https://gitlab.com/firefly-linux ... firefly/Common/GMAC

Author: valeriy.simakov Time: 3/25/2022 15:23
Оther four custom boards have an another error with DMA:

[ 10.334142] rk_gmac-dwmac fe010000.ethernet: Failed to reset the dma
[ 10.334168] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 10.334176] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_open: Hw setup failed
[ 10.443937] rk_gmac-dwmac fe2a0000.ethernet: Failed to reset the dma
[ 10.443963] rk_gmac-dwmac fe2a0000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[ 10.443971] rk_gmac-dwmac fe2a0000.ethernet eth1: stmmac_open: Hw setup failed
[ 10.577682] rk_gmac-dwmac fe010000.ethernet: Failed to reset the dma
[ 10.577708] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 10.577715] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_open: Hw setup failed
[ 10.687930] rk_gmac-dwmac fe2a0000.ethernet: Failed to reset the dma
[ 10.687966] rk_gmac-dwmac fe2a0000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[ 10.687973] rk_gmac-dwmac fe2a0000.ethernet eth1: stmmac_open: Hw setup failed
[ 10.824357] rk_gmac-dwmac fe010000.ethernet: Failed to reset the dma
[ 10.824383] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 10.824390] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_open: Hw setup failed
[ 10.934578] rk_gmac-dwmac fe2a0000.ethernet: Failed to reset the dma
[ 10.934606] rk_gmac-dwmac fe2a0000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[ 10.934635] rk_gmac-dwmac fe2a0000.ethernet eth1: stmmac_open: Hw setup failed

Author: 时间的蝴蝶 Time: 3/28/2022 15:59

valeriy.simakov Posted at 3/25/2022 15:23
Оther four custom boards have an another error with DMA:

[ 10.334142] rk_gmac-dwmac fe010000.e ...

That's usually a problem with the operating clock.

Author: carlfox121 Time: 1/13/2026 00:38
Thank you for your article, it was a real revelation to me. Get ahead in your career with the free C-S4CPB-2508 latest test topics pdf test questions—your key to promotion!

Author: jimmoor455 Time: 1/16/2026 01:13
DumpTOP Salesforce Revenue-Cloud-Consultant-Accredited-Professional 덤프는Salesforce Revenue-Cloud-Consultant-Accredited-Professional실제시험 변화의 기반에서 스케줄에 따라 업데이트 합니다. 만일 테스트에 어떤 변화가 생긴다면 될수록 2일간의 근무일 안에Salesforce Revenue-Cloud-Consultant-Accredited-Professional 덤프를 업데이트 하여 고객들이 테스트에 성공적으로 합격 할 수 있도록 업데이트 된 버전을 구매후 서비스로 제공해드립니다. 업데이트할수 없는 상황이라면 다른 적중율 좋은 덤프로 바꿔드리거나 덤프비용을 환불해드립니다.

Author: johnwhi928 Time: 1/20/2026 11:05
KaoGuTi為每個需要通過CrowdStrike的CCCS-203b考試認證的考生提供了一個明確和卓越的解決方案，我們為你提供CrowdStrike的CCCS-203b考試詳細的問題及答案，我們團隊的IT專家是最有經驗和資格的，我們的考試測試題及答案幾乎和真實得考試一樣，做到這樣的確很了不起，更重要的是我們KaoGuTi網站在全球範圍內執行這項考試培訓通過率最大。

Author: rickboy203 Time: 1/23/2026 10:16
This article is a real eye-opener, thanks for sharing! Wish me success as I prepare for the Valid PDD study plan exam!

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)