Title: Can not upgrade the firmware via USB cable [Print This Page] Author: Maverick_by Time: 7/6/2022 20:12 Title: Can not upgrade the firmware via USB cable Can not upgrade the firmware via USB cable
I successfully compiled Ubuntu firmware and now i want to upgrade firmware on my Core-3568 module.
Previously i successfulyl upgraded it via USB cable from Android to Ubuntu 18.04 using thuis link: https://wiki.t-firefly.com/en/Co ... rade_firmware.html#
I used Windows firmware upgrade mode, DriverAssitant_v5.1.1, RKDevTool_Release_v2.95 and all was OK, Ubuntu 18.04 works fine.
Now i try to make upgrade in the same way, but use my own compiled image AIO-3568J_Rk356x_v1.2.4a_220706.img
But now i have a problem - when i start ADB utility in adb shell with next command:
adb.exe reboot loader
ADB cannot recognize device ! Deriver is installed successfully like before, but ADB don't see device, i even tryed
adb.exe devices
What i'm doing wrong ?
ADB (Android Debug Bridge) working only on Android device ? But as i mentioned before, i upgraded Core-3568 firmware from Android to Ubuntu.
May be i should try use second MaskRom Upgrade Mode ?
Thank you in advance.Author: Liuth Time: 7/7/2022 10:11
you can enter loader mode in hardware way by pressing recovery button https://wiki.t-firefly.com/en/Co ... e.html#introduction Author: Maverick_by Time: 7/8/2022 21:38
yes, i pressed Recovery button.
but read what i have wrote before :
But now i have a problem - when i start ADB utility in adb shell with next command: adb.exe reboot loader
ADB cannot recognize device ! Driver is installed successfully like before, but ADB don't see device, i even tryed
adb.exe devices
Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)