Firefly Open Source Community

Title: MaskRom Upgrade Mode failed [Print This Page]

Author: Maverick_by Time: 7/8/2022 21:53
Title: MaskRom Upgrade Mode failed
MaskRom Upgrade Mode failed

Hello,
im trying nake MaskRom Upgrade Mode for Linux for mb-jm3-rk3568 motherboard with core board Core-3568
I use this link 3. MaskRom mode
https://wiki.t-firefly.com/en/Core-3568J/04-maskrom_mode.html
And i used 4.3.2.1. The Method from Firefly
https://wiki.t-firefly.com/en/Co ... re_with_flash.html#

First time i successfully made firmware update using The Method from Firefly and my system loaded Ubuntu 18.04

But when i wanted update firmware using RKDevTool with RK356x_NorFlash2eMMC-Loader_xxx.img file again it ALWAYS stuck on upgrade:

Download Boot Fail

can you help me with that ?

Author: zyk Time: 7/11/2022 10:04
Hi，which RKDevTool version do you use, is it v2.84?

Author: Liuth Time: 7/11/2022 10:16
if your board can boot into system normally
then just use LOADER mode to update firmware

Author: leewhit109 Time: 4 day before
I’m inspired by the message in this article, thank you for sharing! Free access to GCIH Dumps Torrent materials—good luck!

Author: robshaw878 Time: 3 day before
Your article is absolutely outstanding, thank you for sharing it! The New D-AV-DY-23 test preparation material is very good, and it’s free to access.

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)