Firefly Open Source Community

Title: Reliable NSE7_SOC_AR-7.6 Test Voucher - Simulation NSE7_SOC_AR-7.6 Questions [Print This Page]
Author: tonygre443    Time: 10 hour before
Title: Reliable NSE7_SOC_AR-7.6 Test Voucher - Simulation NSE7_SOC_AR-7.6 Questions
Many candidates like APP test engine of NSE7_SOC_AR-7.6 exam braindumps because it seem very powerful. If you are interested in this version, you can purchase it. This version provides only the questions and answers of NSE7_SOC_AR-7.6 exam braindumps but also some functions easy to practice and master. It can be used on any electronic products if only it can open the browser such as Mobile Phone, Ipad and others. If you always have some fear for the real test or can't control the time to finish your test, APP test engine of Fortinet NSE7_SOC_AR-7.6 Exam Braindumps can set timed test and simulate the real test scene for your practice.
Our test bank includes all the possible questions and answers which may appear in the real exam and the quintessence and summary of the exam papers in the past. We strive to use the simplest language to make the learners understand our NSE7_SOC_AR-7.6 study materials and the most intuitive method to express the complicated and obscure concepts. For the learners to fully understand our NSE7_SOC_AR-7.6 Study Materials, we add the instances, simulation and diagrams to explain the contents which are very hard to understand. So after you use our NSE7_SOC_AR-7.6 study materials you will feel that our NSE7_SOC_AR-7.6 study materials¡¯ name matches with the reality.
>> Reliable NSE7_SOC_AR-7.6 Test Voucher <<
TestKingIT will Help You in Passing the Fortinet NSE7_SOC_AR-7.6 Certification ExamOur supporter of NSE7_SOC_AR-7.6 study guide has exceeded tens of thousands around the world, which directly reflects the quality of them. Because the exam may put a heavy burden on your shoulder while our NSE7_SOC_AR-7.6 practice materials can relieve you of those troubles with time passing by. Just spent some time regularly on our NSE7_SOC_AR-7.6 Exam simulation, your possibility of getting it will be improved greatly. For your information, the passing rate of our NSE7_SOC_AR-7.6 training engine is over 98% up to now.
Fortinet NSE 7 - Security Operations 7.6 Architect Sample Questions (Q56-Q61):NEW QUESTION # 56
According to the National Institute of Standards and Technology (NIST) cybersecurity framework, incident handling activities can be divided into phases.
In which incident handling phase do you quarantine a compromised host in order to prevent an adversary from using it as a stepping stone to the next phase of an attack?
Answer: B
Explanation:
* NIST Cybersecurity Framework Overview:
* The NIST Cybersecurity Framework provides a structured approach for managing and mitigating cybersecurity risks. Incident handling is divided into several phases to systematically address and resolve incidents.
* Incident Handling Phases:
* Preparation: Establishing and maintaining an incident response capability.
* Detection and Analysis: Identifying and investigating suspicious activities to confirm an incident.
* Containment, Eradication, and Recovery:
* Containment: Limiting the impact of the incident.
* Eradication: Removing the root cause of the incident.
* Recovery: Restoring systems to normal operation.
* Containment Phase:
* The primary goal of the containment phase is to prevent the incident from spreading and causing further damage.
* Quarantining a Compromised Host:
* Quarantining involves isolating the compromised host from the rest of the network to prevent adversaries from moving laterally and causing more harm.
* Techniques include network segmentation, disabling network interfaces, and applying access controls.
Reference: NIST Special Publication 800-61, "Computer Security Incident Handling Guide"NIST Incident Handling Detailed Process:
Step 1: Detect the compromised host through monitoring and analysis.
Step 2: Assess the impact and scope of the compromise.
Step 3: Quarantine the compromised host to prevent further spread. This can involve disconnecting the host from the network or applying strict network segmentation.
Step 4: Document the containment actions and proceed to the eradication phase to remove the threat completely.
Step 5: After eradication, initiate the recovery phase to restore normal operations and ensure that the host is securely reintegrated into the network.
Importance of Containment:
Containment is critical in mitigating the immediate impact of an incident and preventing further damage. It buys time for responders to investigate and remediate the threat effectively.
Reference: SANS Institute, "Incident Handler's Handbook" SANS Incident Handling References:
NIST Special Publication 800-61, "Computer Security Incident Handling Guide" SANS Institute, "Incident Handler's Handbook" By quarantining a compromised host during the containment phase, organizations can effectively limit the spread of the incident and protect their network from further compromise.

NEW QUESTION # 57
Which two ways can you create an incident on FortiAnalyzer? (Choose two answers)
Answer: B,C
Explanation:
Comprehensive and Detailed Explanation From FortiSOAR 7.6., FortiSIEM 7.3 Exact Extract study guide:
InFortiAnalyzer 7.6and related SOC versions, incidents serve as centralized containers for tracking and analyzing security events. There are two primary automated and manual methods to initiate an incident:
* Using a custom event handler (A):In FortiAnalyzer, event handlers are used to generate events from raw logs.1A critical feature in recent versions is theAutomatically Create Incidentsetting within a custom event handler.2When enabled, the system automatically elevates a triggered event into a new incident record, allowing analysts to bypass the manual review of every individual event before an incident is raised.3
* By running a playbook (D)laybooks provide a powerful way to automate the incident lifecycle.4A playbook can be configured with anEvent Trigger, meaning it executes as soon as an event matches specific criteria. One of the core actions available within these playbooks is theCreate Incidentaction, which can automatically populate incident details, severity, and category based on the triggering event's data.5This ensures high-fidelity events are consistently captured for investigation.
Why other options are incorrect:
* Using a connector action (B):While connectors allow FortiAnalyzer to communicate with external systems (like ITSM or Security Fabric devices), the act of "creating an incident"insideFortiAnalyzer is a function of the internal event engine or playbook automation, not a standalone connector action used for external integration.
* Manually, on the Event Monitor page (C):While you can view, filter, and acknowledge events on theEvent Monitorpage, the process ofmanuallyraising an incident typically occurs from theIncidentsmodule or by right-clicking an event to "Raise Incident" in the Log View or FortiView, rather than being a core function defined as occurring "on the Event Monitor page" in the same architectural sense as handlers and playbooks.

NEW QUESTION # 58
Refer to Exhibit:
You are tasked with reviewing a new FortiAnalyzer deployment in a network with multiple registered logging devices. There is only one FortiAnalyzer in the topology.
Which potential problem do you observe?
Answer: C
Explanation:
* Understanding FortiAnalyzer Data Policy and Disk Utilization:
* FortiAnalyzer uses data policies to manage log storage, retention, and disk utilization.
* The Data Policy section indicates how long logs are kept for analytics and archive purposes.
* The Disk Utilization section specifies the allocated disk space and the proportions used for analytics and archive, as well as when alerts should be triggered based on disk usage.
* Analyzing the Provided Exhibit:
* Keep Logs for Analytics:60 Days
* Keep Logs for Archive:120 Days
* Disk Allocation:300 GB (with a maximum of 441 GB available)
* Analytics: Archive Ratio:30% : 70%
* Alert and Delete When Usage Reaches:90%
* Potential Problems Identification:
* Disk Space Allocation:The allocated disk space is 300 GB out of a possible 441 GB, which might not be insufficient if the log volume is high, but it is not the primary concern based on the given data.
* Analytics-to-Archive Ratio:The ratio of 30% for analytics and 70% for archive is unconventional.
Typically, a higher percentage is allocated for analytics since real-time or recent data analysis is often prioritized. A common configuration might be a 70% analytics and 30% archive ratio. The misconfigured ratio can lead to insufficient space for analytics, causing issues with real-time monitoring and analysis.
* Retention Periods:While the retention periods could be seen as lengthy, they are not necessarily indicative of a problem without knowing the specific log volume and compliance requirements.
The length of these periods can vary based on organizational needs and legal requirements.
* Conclusion:
* Based on the analysis, the primary issue observed is theanalytics-to-archive ratiobeing misconfigured. This misconfiguration can significantly impact the effectiveness of the FortiAnalyzer in real-time log analysis, potentially leading to delayed threat detection and response.
References:
Fortinet Documentation on FortiAnalyzer Data Policies and Disk Management.
Best Practices for FortiAnalyzer Log Management and Disk Utilization.

NEW QUESTION # 59
Refer to the exhibit,
which shows the partial output of the MITRE ATT&CK Enterprise matrix on FortiAnalyzer.
Which two statements are true? (Choose two.)
Answer: A,B
Explanation:
* Understanding the MITRE ATT&CK Matrix:
* The MITRE ATT&CK framework is a knowledge base of adversary tactics and techniques based on real-world observations.
* Each tactic in the matrix represents the "why" of an attack technique, while each technique represents "how" an adversary achieves a tactic.
* Analyzing the Provided Exhibit:
* The exhibit shows part of the MITRE ATT&CK Enterprise matrix as displayed on FortiAnalyzer.
* The focus is on technique T1071 (Application Layer Protocol), which has subtechniques labeled T1071.001, T1071.002, T1071.003, and T1071.004.
* Each subtechnique specifies a different type of application layer protocol used for Command and Control (C2):
* T1071.001 Web Protocols
* T1071.002 File Transfer Protocols
* T1071.003 Mail Protocols
* T1071.004 DNS
* Identifying Key Points:
* Subtechniques under T1071:There are four subtechniques listed under the primary technique T1071, confirming that statement B is true.
* Event Handlers for T1071:FortiAnalyzer includes event handlers for monitoring various tactics and techniques. The presence of event handlers for tactic T1071 suggests active monitoring and alerting for these specific subtechniques, confirming that statement C is true.
* Misconceptions Clarified:
* Statement A (four techniques under tactic T1071) is incorrect because T1071 is a single technique with four subtechniques.
* Statement D (15 events associated with the tactic) is misleading. The number 15 refers to the techniques under the Application Layer Protocol, not directly related to the number of events.
Conclusion:
* The accurate interpretation of the exhibit confirms that there are four subtechniques under technique T1071 and that there are event handlers covering tactic T1071.
References:
MITRE ATT&CK Framework documentation.
FortiAnalyzer Event Handling and MITRE ATT&CK Integration guides.

NEW QUESTION # 60
Refer to the exhibit.
Which two options describe how the Update Asset and Identity Database playbook is configured? (Choose two.)
Answer: B,D
Explanation:
* Understanding the Playbook Configuration:
* The playbook named "Update Asset and Identity Database" is designed to update the FortiAnalyzer Asset and Identity database with endpoint and user information.
* The exhibit shows the playbook with three main components: ON_SCHEDULE STARTER, GET_ENDPOINTS, and UPDATE_ASSET_AND_IDENTITY.
* Analyzing the Components:
* ON_SCHEDULE STARTER:This component indicates that the playbook is triggered on a schedule, not on-demand.
* GET_ENDPOINTS:This action retrieves information about endpoints, suggesting it interacts with an endpoint management system.
* UPDATE_ASSET_AND_IDENTITY:This action updates the FortiAnalyzer Asset and Identity database with the retrieved information.
* Evaluating the Options:
* Option A:The actions shown in the playbook are standard local actions that can be executed by the FortiAnalyzer, indicating the use of a local connector.
* Option B:There is no indication that the playbook uses a FortiMail connector, as the tasks involve endpoint and identity management, not email.
* Option C:The playbook is using an "ON_SCHEDULE" trigger, which contradicts the description of an on-demand trigger.
* Option D:The action "GET_ENDPOINTS" suggests integration with an endpoint management system, likely FortiClient EMS, which manages endpoints and retrieves information from them.
* Conclusion:
* The playbook is configured to use a local connector for its actions.
* It interacts with FortiClient EMS to get endpoint information and update the FortiAnalyzer Asset and Identity database.
References:
Fortinet Documentation on Playbook Actions and Connectors.
FortiAnalyzer and FortiClient EMS Integration Guides.

NEW QUESTION # 61
......
After you visit the pages of our product on the websites, you will know the version, price, the quantity of the answers of our product, the update time, 3 versions for you to choose. You can dick and see the forms of the answers and the titles and the contents of our Fortinet NSE 7 - Security Operations 7.6 Architect guide torrent. If you feel that it is worthy for you to buy our NSE7_SOC_AR-7.6 Test Torrent you can choose a version which you favor, fill in our mail and choose the most appropriate purchase method and finally pay for our NSE7_SOC_AR-7.6 study tool after you enter in the pay pages on the website. We will send the product to the client by the forms of mails within 10 minutes.
Simulation NSE7_SOC_AR-7.6 Questions: https://www.testkingit.com/Fortinet/latest-NSE7_SOC_AR-7.6-exam-dumps.html
So you have no need to trouble about our NSE7_SOC_AR-7.6 learning guide, We believe that you will like the online version of our NSE7_SOC_AR-7.6 exam questions, Fortinet Reliable NSE7_SOC_AR-7.6 Test Voucher Higher social status, Our Simulation NSE7_SOC_AR-7.6 Questions - Fortinet NSE 7 - Security Operations 7.6 Architect practice prep dumps are always focus on researching the newest and most comprehensive exam dumps, which can give our candidates the most helpful guide, Fortinet Reliable NSE7_SOC_AR-7.6 Test Voucher All of them have passed the exam and got the certificate.
Keeping up with the latest software patches can lessen your chances of being hacked, CenterPoint Broadband Technology, and Motorola, So you have no need to trouble about our NSE7_SOC_AR-7.6 learning guide.
Study Anywhere With TestKingIT Portable Fortinet NSE7_SOC_AR-7.6 PDF Questions FormatWe believe that you will like the online version of our NSE7_SOC_AR-7.6 exam questions, Higher social status, Our Fortinet NSE 7 - Security Operations 7.6 Architect practice prep dumps are always focus on researching the newest NSE7_SOC_AR-7.6 and most comprehensive exam dumps, which can give our candidates the most helpful guide.
All of them have passed the exam and got the certificate.




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1