試験の準備方法-素敵なMTCNA模擬問題試験-信頼的なMTCNA復習過去問今の競争が激しい社会にあたり、あなたは努力して所有したいことがあります。IT職員にとって、MTCNA試験認定書はあなたの実力を証明できる重要なツールです。だから、MikroTik MTCNA試験に合格する必要があります。それで、弊社の質高いMTCNA試験資料を薦めさせてください。 MikroTik Certified Network Associate Exam 認定 MTCNA 試験問題 (Q125-Q130):質問 # 125
How many collision domains are created when you segment a network with a 12-port switch?
A. 0
B. 1
C. 2
D. 3
正解：B
解説：
Each port on a switch creates its own collision domain. Unlike hubs (which extend a single collision domain), switches segment each interface, allowing full-duplex communication and eliminating collisions.
MTCNA Course Material - Ethernet Switching Concepts:
"Each switch port is a separate collision domain. A 24-port switch creates 24 separate collision domains." Rene Meneses MTCNA Study Guide - Collision and Broadcast Domains:
"Switches break up collision domains per port, unlike hubs."
Therefore, a 12-port switch creates 12 individual collision domains.
質問 # 126
Which of the following Routes statuses are possible?
A. S = Static
B. A = Active
C. C = Connected
D. D = Drop
正解：A、B、C
質問 # 127
To connect your MikroTik router to a wireless access point, you have to:
A. Use the same Radio Name
B. Use the same Band (5 GHz, 2.4 GHz, ...)
C. Use the same SSID as on accesspoint
正解：B、C
解説：
To establish a wireless client connection to an access point:
* The SSID must match exactly - including capitalization.
* The Band must be compatible - i.e., both devices must support and use the same frequency band (2.4 GHz or 5GHz).
* Radio Name is an identifier for display purposes only and does not affect connectivity.
Option Analysis:
* A.#Required - Matching SSID is essential.
* B.#Not Required - Radio Name is just a display label in tools like Winbox.
* C.#Required - Band compatibility is critical to ensure the device can "see" and connect to the AP.
Extract from Official MTCNA Course Material - Wireless Client Configuration:
"To connect to an AP, the client must use the same SSID and operate on a compatible band and frequency." Extract from Rene Meneses MTCNA Study Guide - Wireless Modes:
"SSID and band must match to connect. Radio name is not used in the authentication or association process." Extract from Terry Combs Notes - Wireless Settings:
"SSID is like the network name, and it must be identical. Mismatched bands (e.g., 2.4 vs 5GHz) will prevent discovery."
質問 # 128
How many IP addresses can one find in the header of an IP packet?
A. 0
B. 1
C. 2
D. 3
正解：D
質問 # 129
Mark all the features that can be used for limiting client registrations to your access point: