Title: H35-211_V2.5 Praxispr¨¹fung, H35-211_V2.5 Schulungsunterlagen [Print This Page] Author: tomsmit671 Time: yesterday 21:02 Title: H35-211_V2.5 Praxispr¨¹fung, H35-211_V2.5 Schulungsunterlagen Die berufliche Aussichten einer Person haben viel mit ihre Fähigkeit zu tun. Deshalb ist die internationale Zertifikat ein guter Beweis f¨¹r Ihre Fähigkeit. Huawei H35-211_V2.5 Pr¨¹fungszertifizierung ist ein ¨¹berzeugender Beweis f¨¹r Ihre IT-Fähigkeit. Diese Pr¨¹fung zu bestehen braucht genug Vorbereitungen. Die Unterlagen der Huawei H35-211_V2.5 Pr¨¹fung werden von unseren erfahrenen Forschungs-und Entwicklungsstellen sorgfältig geordnet. Diese wertvolle Unterlagen können Sie jetzt benutzen. Auf unserer offiziellen Webseite können Sie die Huawei H35-211_V2.5 Pr¨¹fungssoftware gesichert kaufen.
Nach Bestehen der Huawei H35-211_V2.5 Pr¨¹fung wird dem Kandidaten die HCIP-Access V2.5 Zertifizierung verliehen, die global als Symbol f¨¹r Exzellenz im Bereich der Zugangsnetzwerktechnologien anerkannt ist. Diese Zertifizierung wird die Kompetenz des Kandidaten im Entwerfen, Bereitstellen und Warten von Zugangsnetzwerken demonstrieren. Es wird auch die Karriereaussichten des Kandidaten verbessern, da viele Organisationen zertifizierte Fachleute f¨¹r ihr IT-Infrastrukturmanagement bevorzugen.
Die Huawei H35-211_V2.5 (HCIP-Access v2.5) ist eine umfassende Pr¨¹fung, die eine breite Palette von Themen im Zusammenhang mit Zugangsnetzwerkstechnologien abdeckt. Die Pr¨¹fung soll Kandidaten ¨¹ber ihre Kenntnisse ¨¹ber Access -Netzwerkarchitektur, Zugangsnetzwerkprotokolle, Netzwerksicherheit und vieles mehr testen. Dar¨¹ber hinaus soll die Pr¨¹fung die Fähigkeit der Kandidaten bewerten, Zugangsnetzwerke in verschiedenen Umgebungen zu entwerfen, bereitzustellen und zu verwalten, einschließlich kleiner und mittelgroßer Unternehmen sowie großen Unternehmen.
H35-211_V2.5 Schulungsunterlagen, H35-211_V2.5 ExamsfragenAls ein Mitglied der IT-Branche, machen Sie sich noch Sorgen um die Huawei H35-211_V2.5 IT-Zertifizierungspr¨¹fungen? Es ist nicht so leicht, die Huawei H35-211_V2.5 IT-Zertifizierungspr¨¹fung, die Ihre relevanten Fachkenntnisse und Fähigkeiten ¨¹berpr¨¹ft, zu bestehen. F¨¹r die Kandidaten, die sich zum ersten Mal an der Huawei H35-211_V2.5 IT-Zertifizierungspr¨¹fung beteiligen, ist ein zielgerichtetes Schulungsprogramm von großer Notwendigkeit. ZertFragen stellt den Kandidaten die zielgerichteten Programme, die Simulationspr¨¹fung, zielgerichtete Lernhilfe und die Pr¨¹fungsfragen und Antworten, die 95% der realen Pr¨¹fung ähnlich sind, zur Verf¨¹gung. Schicken Sie doch schnell ZertFragen in den Warenkorb.
Die Huawei H35-211_V2.5 (HCIP-Access V2.5) Pr¨¹fung ist eine Zertifizierungspr¨¹fung, die das Wissen und die Fähigkeiten von IT-Profis im Bereich der Zugangsnetzwerktechnologien testen soll. Die Pr¨¹fung umfasst eine Vielzahl von Themen, einschließlich Zugangsnetzwerkprinzipien, Netzwerkplanung und -design, Zugangsnetzwerkkonstruktion und -wartung sowie Zugangsnetzwerkfehlersuche. Die Pr¨¹fung richtet sich an IT-Profis, die sich auf Zugangsnetzwerktechnologien spezialisiert haben, einschließlich Netzwerktechnikern, Netzwerkadministratoren und Netzwerkingenieuren. Huawei HCIP-Access V2.5 H35-211_V2.5 Pr¨¹fungsfragen mit Lösungen (Q24-Q29):24. Frage
When the H.248 protocol is used to deploy the VoIP service, the registration information sent by the MG to the MGC contains the following information:
Services {Method=Restart Reason=[901]}
Which command can trigger the information?
A. ONT re-register
B. Reboot system
C. Reset coldstart
D. Board restart
Antwort: D
Begr¨¹ndung:
The MG reports availability and restarts to the MGC using H.248 ServiceChange with Method=Restart. The Reason code distinguishes the type of restart. In Huawei implementations aligned with H.248 semantics, Reason=[901] corresponds to a warm/warmboard restart scenario rather than a full cold start.
Board restart triggers a warm restart of the voice board/MG, producing ServiceChange { Method=Restart, Reason=901 }.
Reset coldstart performs a cold start, which would use a different reason code (cold start), not 901.
Reboot system generally implies a broader device reboot similar to cold start semantics, not 901.
ONT re-register affects ONU registration and does not cause the MG to announce a ServiceChange restart to the MGC.
References: HCIP-Access V2.5 Study Guide (H.248 ServiceChange usage and restart reporting); Huawei VoIP/MG Board Maintenance Guide (warm vs cold restart indications in ServiceChange).
25. Frage
(Radio) When configuring multicast services on MA5600T/MA5680T, the programs of multicast VLANs are statically configured. Which of the following must be configured, otherwise the multicast programs may not be able to be watched?
A. igmp preview
B. igmp profile
C. igmp priority
D. igmp program
Antwort: D
Begr¨¹ndung:
On Huawei OLTs (e.g., MA5600T/MA5680T), deploying IPTV/multicast commonly uses a program list (channel list) to map program numbers to multicast group addresses-this is configured with igmp program.
When programs are statically configured under the multicast VLAN, the program definitions themselves are mandatory; without them, set-top boxes cannot select (zap to) channels by program number/address mapping and the OLT cannot correctly forward the requested multicast streams.
26. Frage
(Radio) Regarding multicast, the following description is incorrect
A. The user-issued Report is captured in the single board logic and sent to the single board CPU
B. Device-based global configurations of Layer 2 groups refer to common parameters of protocols ( IGMP
Proxy, GMP Snoop) to all
C. When the igmp match mode disables, you need to configure the multicast program group
D. Add Lgmp user under BTV, and by default, multicast users can watch 8 programs.
Antwort: C
27. Frage
(Radio) A power access service deploys GPON Type C dual attribution protection, and the protection group is fixed with the upstream Ethernet port status on the OLT, and when the Ethernet port status associated with the protection group on the OLT becomes down, the following description is incorrect.
A. The ONU detects link failures and triggers protection reversals
B. OLT laughs at onu uplink state changes
C. After the inversion, the service on the ONU is sent to the OLT through the protect port, that is, the service packet is transmitted on the protect example planting road
D. The state of the onU side work port changes to standby
Antwort: A
28. Frage
(Multi-select) You queried PPPoE simulation results on the MDU side as shown below. From the query results, it can be judged that:
(Note: the actual simulation output is not included in the prompt.)
A. The PPPoE user account and authentication method are correct
B. The MDU management IP is configured correctly
C. The service configuration of PPPoE users is normal
D. The link between the MDU uplink and the BRAS is OK
E. A, B, COn Huawei devices, PPPoE diagnostic/simulation tools verify the end-to-end PPPoE procedure (Discovery and Session), and-when credentials are supplied-authentication (PAP/CHAP) as well:
Successful PADI/PADO/PADR/PADS exchange confirms Layer-2 reachability to the BRAS (option C).
A successful session establishment and authentication indicate that the service configuration for PPPoE users is correct and the username/password & auth method are valid (options A and B).The MDU management IP (option D) is unrelated to the PPPoE access simulation itself; PPPoE runs over the subscriber VLAN/port/uplink toward BRAS, not via the MDU's management plane, so simulation success does not prove the management IP configuration.These behaviors align with Huawei's PPPoE diagnostic/monitoring command descriptions that detail session status, discovery phases, and authentication verification for fault location