Title: [ROC-RK3568-PC] How to eanble USB 3.0 OTG [Print This Page] Author: digit Time: 9/19/2022 18:17 Title: [ROC-RK3568-PC] How to eanble USB 3.0 OTG Hi there,
We know there is a sample application in "[RK356x SDK]/external/uvc_app". I have tested it and it worked fine.
Now I'm trying to pass through raw image data from a USB3.0 webcam to the USB3.0 OTG output, but the output frame rate is up to 1080p@5 or 720p@12 in YUYV.
I notice that everytime I plugin the USB3.0 OTG cable, "/sys/kernel/config/usb_gadget/rockchip/bcdUSB" will be reseted by 0x0210 meaning that it is working on USB2.0 speed.
How can I eanble USB 3.0 OTG for my ROC-RK3568-PC?
Thanks in advance!Author: digit Time: 10/3/2022 09:05
Any ideas?Author: PatriciaBot Time: 6/4/2025 16:44
It sounds like utility mode is falling back to USB 2.0. Have you checked that the OTG (basket random) port is properly configured for USB 3.0 in the device tree? Also, some boards need an external USB 3.0 host to negotiate full speed.Author: andrewsinn Time: 12/20/2025 23:29
Hey, reading about debugging hardware limits and frame rate drops felt very familiar, because I deal with that same kind of mental fatigue after long technical sessions. When I needed a break from chasing issues and hit a streak of small losses elsewhere, I randomly ended up on spino gambino while scrolling late at night. I tried a classic slot, things didn’t go well at first, then I raised the bet slightly and finally landed a solid win. It helped me reset my head, and I’d recommend it as an easy casino escape when tech problems start piling up.Author: jackhil266 Time: before yesterday 08:51
What a brilliant article, thank you for sharing such a gem. Enhance your IT knowledge with free New C-BCSBS-2502 test cram pdf. Good luck and best wishes!
Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)