Firefly Open Source Community

Title: ROC-RK3399-PC Pro, wifi and bluetooth doesn't work [Print This Page]
Author: Gustoff    Time: 2/11/2023 21:03
Title: ROC-RK3399-PC Pro, wifi and bluetooth doesn't work

I have the ROC-RK3399-PC Pro board, but I can't find any information on which device tree to use to build the kernel. When I try to compile it with different rk3399pro-* trees, in all of them wifi and bluetooth don't work!
And which wireless driver should I choose in kernel?


Here is dmesg:
  1. [    0.000000] Booting Linux on physical CPU 0x0
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Initializing cgroup subsys cpuacct
  5. [    0.000000] Linux version 4.4.194 (build@vm-LCoreRep) (neotek: 2190803a4f2022) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #51 SMP Tue Jan 17 01:19:16 CST 2023
  6. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  7. [    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  8. [    0.000000] bootconsole [uart0] enabled
  9. [    0.000000] On node 0 totalpages: 1007616
  10. [    0.000000]   DMA zone: 15864 pages used for memmap
  11. [    0.000000]   DMA zone: 0 pages reserved
  12. [    0.000000]   DMA zone: 1007616 pages, LIFO batch:31
  13. [    0.000000] psci: probing for conduit method from DT.
  14. [    0.000000] psci: PSCIv1.0 detected in firmware.
  15. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  16. [    0.000000] psci: Trusted OS migration not required
  17. [    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ec6000 s46312 r8192 d31512 u86016
  18. [    0.000000] pcpu-alloc: s46312 r8192 d31512 u86016 alloc=21*4096
  19. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  20. [    0.000000] Detected VIPT I-cache on CPU0
  21. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  22. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 991752
  23. [    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.slot_suffix= androidboot.serialno=e3e23f15f8a446da  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
  24. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  25. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  26. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  27. [    0.000000] software IO TLB: mapped [mem 0xf7e7d000-0xf7ebd000] (0MB)
  28. [    0.000000] Memory: 3921896K/4030464K available (14526K kernel code, 1890K rwdata, 5696K rodata, 1216K init, 2008K bss, 108568K reserved, 0K cma-reserved)
  29. [    0.000000] Virtual kernel memory layout:
  30.                    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  31.                    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  32.                      .init : 0xffffff8009450000 - 0xffffff8009580000   (  1216 KB)
  33.                      .text : 0xffffff8008080000 - 0xffffff8008eb0000   ( 14528 KB)
  34.                    .rodata : 0xffffff8008eb0000 - 0xffffff8009450000   (  5760 KB)
  35.                      .data : 0xffffff8009580000 - 0xffffff8009758808   (  1891 KB)
  36.                    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  37.                              0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
  38.                    fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
  39.                    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  40.                    memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
  41. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  42. [    0.000000] Hierarchical RCU implementation.
  43. [    0.000000]         Build-time adjustment of leaf fanout to 64.
  44. [    0.000000]         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  45. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  46. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  47. [    0.000000] GIC: Using split EOI/Deactivate mode
  48. [    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  49. [    0.000000] ITS: allocated 65536 Devices @f2c80000 (psz 64K, shr 0)
  50. [    0.000000] ITS: using cache flushing for cmd queue
  51. [    0.000000] GIC: using LPI property table @0x00000000f2c10000
  52. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  53. [    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  54. [    0.000000] CPU0: using LPI pending table @0x00000000f2c20000
  55. [    0.000000] GIC: using cache flushing for LPI property table
  56. [    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  57. [    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  58. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  59. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  60. [    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
  61. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  62. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  63. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  64. [    0.002364] Console: colour dummy device 80x25
  65. [    0.002809] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  66. [    0.003800] pid_max: default: 32768 minimum: 301
  67. [    0.004339] Security Framework initialized
  68. [    0.004810] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  69. [    0.005452] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  70. [    0.006943] Initializing cgroup subsys io
  71. [    0.007354] Initializing cgroup subsys memory
  72. [    0.007799] Initializing cgroup subsys devices
  73. [    0.008231] Initializing cgroup subsys freezer
  74. [    0.008675] Initializing cgroup subsys perf_event
  75. [    0.009130] Initializing cgroup subsys net_prio
  76. [    0.009569] Initializing cgroup subsys pids
  77. [    0.010003] ftrace: allocating 52028 entries in 204 pages
  78. [    0.146454] sched-energy: Sched-energy-costs installed from DT
  79. [    0.147022] CPU0: update cpu_capacity 401
  80. [    0.147466] ASID allocator initialised with 32768 entries
  81. [    0.151450] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  82. [    0.152945] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  83. [    0.155393] Detected VIPT I-cache on CPU1
  84. [    0.155432] CPU1: found redistributor 1 region 0:0x00000000fef20000
  85. [    0.155469] CPU1: using LPI pending table @0x00000000f2ed0000
  86. [    0.155531] CPU1: update cpu_capacity 401
  87. [    0.155535] CPU1: Booted secondary processor [410fd034]
  88. [    0.156424] Detected VIPT I-cache on CPU2
  89. [    0.156459] CPU2: found redistributor 2 region 0:0x00000000fef40000
  90. [    0.156496] CPU2: using LPI pending table @0x00000000f2f00000
  91. [    0.156554] CPU2: update cpu_capacity 401
  92. [    0.156558] CPU2: Booted secondary processor [410fd034]
  93. [    0.157421] Detected VIPT I-cache on CPU3
  94. [    0.157454] CPU3: found redistributor 3 region 0:0x00000000fef60000
  95. [    0.157490] CPU3: using LPI pending table @0x00000000f2f50000
  96. [    0.157546] CPU3: update cpu_capacity 401
  97. [    0.157549] CPU3: Booted secondary processor [410fd034]
  98. [    0.158431] Detected PIPT I-cache on CPU4
  99. [    0.158458] CPU4: found redistributor 100 region 0:0x00000000fef80000
  100. [    0.158498] CPU4: using LPI pending table @0x00000000f2f90000
  101. [    0.158536] CPU4: update cpu_capacity 1024
  102. [    0.158540] CPU4: Booted secondary processor [410fd082]
  103. [    0.159239] Detected PIPT I-cache on CPU5
  104. [    0.159267] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  105. [    0.159306] CPU5: using LPI pending table @0x00000000f2fc0000
  106. [    0.159346] CPU5: update cpu_capacity 1024
  107. [    0.159349] CPU5: Booted secondary processor [410fd082]
  108. [    0.159454] Brought up 6 CPUs
  109. [    0.171815] SMP: Total of 6 processors activated.
  110. [    0.172266] CPU features: detected feature: GIC system register CPU interface
  111. [    0.172955] CPU features: detected feature: 32-bit EL0 Support
  112. [    0.173515] CPU: All CPU(s) started at EL2
  113. [    0.173947] alternatives: patching kernel code
  114. [    0.175862] devtmpfs: initialized
  115. [    0.195570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  116. [    0.196504] futex hash table entries: 2048 (order: 5, 131072 bytes)
  117. [    0.197549] xor: measuring software checksum speed
  118. [    0.207712]    8regs     :  2856.000 MB/sec
  119. [    0.217767]    8regs_prefetch:  2564.000 MB/sec
  120. [    0.227821]    32regs    :  3208.000 MB/sec
  121. [    0.237875]    32regs_prefetch:  2848.000 MB/sec
  122. [    0.238304] xor: using function: 32regs (3208.000 MB/sec)
  123. [    0.238826] pinctrl core: initialized pinctrl subsystem
  124. [    0.239543] regulator-dummy: no parameters
  125. [    0.241141] Failed to find legacy iommu devices
  126. [    0.241963] NET: Registered protocol family 16
  127. [    0.246666] cpuidle: using governor ladder
  128. [    0.250679] cpuidle: using governor menu
  129. [    0.251063] Registered FIQ tty driver
  130. [    0.251945] vdso: 2 pages (1 code @ ffffff8008eb6000, 1 data @ ffffff8009584000)
  131. [    0.252670] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  132. [    0.253843] DMA: preallocated 1024 KiB pool for atomic allocations
  133. [    0.270833] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  134. [    0.270908] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  135. [    0.270983] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  136. [    0.271056] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  137. [    0.271125] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  138. [    0.278668] console [pstore-1] enabled
  139. [    0.279021] pstore: Registered ramoops as persistent store backend
  140. [    0.279599] ramoops: attached 0xf0000@0x110000, ecc: 0/0
  141. [    0.283538] console [ttyFIQ0] enabled
  142. [    0.284223] bootconsole [uart0] disabled
  143. [    0.285158] Registered fiq debugger ttyFIQ0
  144. [    0.335499] raid6: int64x1  gen()   468 MB/s
  145. [    0.352524] raid6: int64x1  xor()   412 MB/s
  146. [    0.369675] raid6: int64x2  gen()   675 MB/s
  147. [    0.386744] raid6: int64x2  xor()   601 MB/s
  148. [    0.403818] raid6: int64x4  gen()   972 MB/s
  149. [    0.420884] raid6: int64x4  xor()   667 MB/s
  150. [    0.438032] raid6: int64x8  gen()   789 MB/s
  151. [    0.455072] raid6: int64x8  xor()   628 MB/s
  152. [    0.472195] raid6: neonx1   gen()   964 MB/s
  153. [    0.489267] raid6: neonx1   xor()   675 MB/s
  154. [    0.506382] raid6: neonx2   gen()  1277 MB/s
  155. [    0.523459] raid6: neonx2   xor()   984 MB/s
  156. [    0.540529] raid6: neonx4   gen()  1726 MB/s
  157. [    0.557622] raid6: neonx4   xor()  1181 MB/s
  158. [    0.574723] raid6: neonx8   gen()  1687 MB/s
  159. [    0.591809] raid6: neonx8   xor()  1240 MB/s
  160. [    0.592191] raid6: using algorithm neonx4 gen() 1726 MB/s
  161. [    0.592670] raid6: .... xor() 1181 MB/s, rmw enabled
  162. [    0.593115] raid6: using intx1 recovery algorithm
  163. [    0.594699] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vccadc-ref[0]'
  164. [    0.594726] vcc1v8_sys: 1800 mV
  165. [    0.594901] reg-fixed-voltage vccadc-ref: vcc1v8_sys supplying 1800000uV
  166. [    0.594957] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  167. [    0.594974] vcc3v3_sys: 3300 mV
  168. [    0.595137] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  169. [    0.595193] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcca-0v9[0]'
  170. [    0.595212] reg-fixed-voltage vcca-0v9: Looking up vin-supply from device tree
  171. [    0.595345] vcca_0v9: supplied by vcc3v3_sys
  172. [    0.595765] vcca_0v9: 900 mV
  173. [    0.595918] reg-fixed-voltage vcca-0v9: vcca_0v9 supplying 900000uV
  174. [    0.596086] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
  175. [    0.596137] vcc5v0_host: no parameters
  176. [    0.596300] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  177. [    0.596437] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc_hub_en-regulator[0]' - status (0)
  178. [    0.596481] vcc_hub_en: no parameters
  179. [    0.596630] reg-fixed-voltage vcc_hub_en-regulator: vcc_hub_en supplying 0uV
  180. [    0.596797] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-wifi[0]' - status (0)
  181. [    0.596843] vcc_wifi: 5000 mV
  182. [    0.597012] reg-fixed-voltage vcc-wifi: vcc_wifi supplying 5000000uV
  183. [    0.597145] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-pcie[0]' - status (0)
  184. [    0.597188] vcc_pcie: 5000 mV
  185. [    0.597344] reg-fixed-voltage vcc-pcie: vcc_pcie supplying 5000000uV
  186. [    0.597482] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-sd[0]' - status (0)
  187. [    0.597518] vcc_sd: 3300 mV
  188. [    0.597688] reg-fixed-voltage vcc-sd: vcc_sd supplying 3300000uV
  189. [    0.597744] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-sys[0]'
  190. [    0.597772] vcc5v0_sys: 5000 mV
  191. [    0.597923] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
  192. [    0.597974] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
  193. [    0.597991] vcc_phy: no parameters
  194. [    0.598150] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
  195. [    0.598291] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-lcd-regulator[0]' - status (0)
  196. [    0.598335] vcc_lcd: no parameters
  197. [    0.598494] reg-fixed-voltage vcc-lcd-regulator: vcc_lcd supplying 0uV
  198. [    0.598630] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc_mipi[0]' - status (0)
  199. [    0.598668] vcc_mipi: no parameters
  200. [    0.598850] reg-fixed-voltage vcc_mipi: vcc_mipi supplying 0uV
  201. [    0.598976] of_get_named_gpiod_flags: parsed 'gpio' property of node '/dvdd-1v2[0]' - status (0)
  202. [    0.599013] dvdd_1v2: no parameters
  203. [    0.599172] reg-fixed-voltage dvdd-1v2: dvdd_1v2 supplying 0uV
  204. [    0.599305] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fan-regulator[0]' - status (0)
  205. [    0.599346] fan_enable: no parameters
  206. [    0.599511] reg-fixed-voltage fan-regulator: fan_enable supplying 0uV
  207. [    0.599572] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/poe-12v[0]'
  208. [    0.599590] poe_12v: 12000 mV
  209. [    0.599748] reg-fixed-voltage poe-12v: poe_12v supplying 12000000uV
  210. [    0.599855] rockchip-pinctrl pinctrl: pin gpio4-27 already requested by vcc-wifi; cannot claim for vcc3v3-ngff
  211. [    0.600736] rockchip-pinctrl pinctrl: pin-155 (vcc3v3-ngff) status -22
  212. [    0.601321] rockchip-pinctrl pinctrl: could not request pin 155 (gpio4-27) from group vcc3v3-ngff-en  on device rockchip-pinctrl
  213. [    0.602344] reg-fixed-voltage vcc3v3-ngff: Error applying setting, reverse things back
  214. [    0.603106] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-ngff[0]' - status (0)
  215. [    0.603124] vcc3v3_ngff: GPIO 155 is already used
  216. [    0.603136] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  217. [    0.603159] vcc3v3_ngff: unable to resolve supply
  218. [    0.603169] vcc3v3_ngff: 3300 mV
  219. [    0.603302] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  220. [    0.603325] vcc3v3_ngff: regulator get failed, ret=-517
  221. [    0.603813] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  222. [    0.603834] vcc3v3_ngff: unable to resolve supply
  223. [    0.603845] reg-fixed-voltage vcc3v3-ngff: vcc3v3_ngff supplying 3300000uV
  224. [    0.603919] rockchip-pinctrl pinctrl: pin gpio1-17 already requested by vcc-pcie; cannot claim for vcc3v3-pcie
  225. [    0.604797] rockchip-pinctrl pinctrl: pin-49 (vcc3v3-pcie) status -22
  226. [    0.605381] rockchip-pinctrl pinctrl: could not request pin 49 (gpio1-17) from group vcc3v3-pcie-en  on device rockchip-pinctrl
  227. [    0.606391] reg-fixed-voltage vcc3v3-pcie: Error applying setting, reverse things back
  228. [    0.607147] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie[0]' - status (0)
  229. [    0.607163] vcc3v3_pcie: GPIO 49 is already used
  230. [    0.607175] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  231. [    0.607197] vcc3v3_pcie: unable to resolve supply
  232. [    0.607206] vcc3v3_pcie: 3300 mV
  233. [    0.607339] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  234. [    0.607362] vcc3v3_pcie: regulator get failed, ret=-517
  235. [    0.607849] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  236. [    0.607871] vcc3v3_ngff: unable to resolve supply
  237. [    0.607880] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  238. [    0.607901] vcc3v3_pcie: unable to resolve supply
  239. [    0.607912] reg-fixed-voltage vcc3v3-pcie: vcc3v3_pcie supplying 3300000uV
  240. [    0.608607] iommu: Adding device ff650000.vpu_service to group 0
  241. [    0.609233] iommu: Adding device ff660000.rkvdec to group 1
  242. [    0.609834] iommu: Adding device ff8f0000.vop to group 2
  243. [    0.610402] iommu: Adding device ff900000.vop to group 3
  244. [    0.610963] iommu: Adding device ff910000.rkisp1 to group 4
  245. [    0.611553] iommu: Adding device ff920000.rkisp1 to group 5
  246. [    0.612562] rk_iommu ff650800.iommu: can't get sclk
  247. [    0.613265] rk_iommu ff660480.iommu: can't get sclk
  248. [    0.613923] rk_iommu ff8f3f00.iommu: can't get sclk
  249. [    0.614525] rk_iommu ff903f00.iommu: can't get sclk
  250. [    0.615147] rk_iommu ff914000.iommu: can't get sclk
  251. [    0.615744] rk_iommu ff924000.iommu: can't get sclk
  252. [    0.616567] SCSI subsystem initialized
  253. [    0.617071] libata version 3.00 loaded.
  254. [    0.617277] usbcore: registered new interface driver usbfs
  255. [    0.617806] usbcore: registered new interface driver hub
  256. [    0.618372] usbcore: registered new device driver usb
  257. [    0.619109] media: Linux media interface: v0.10
  258. [    0.619551] Linux video capture interface: v2.00
  259. [    0.620043] pps_core: LinuxPPS API ver. 1 registered
  260. [    0.620489] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  261. [    0.621315] PTP clock support registered
  262. [    0.622813] Advanced Linux Sound Architecture Driver Initialized.
  263. [    0.623858] Bluetooth: Core ver 2.21
  264. [    0.624199] NET: Registered protocol family 31
  265. [    0.624608] Bluetooth: HCI device and connection manager initialized
  266. [    0.625176] Bluetooth: HCI socket layer initialized
  267. [    0.625620] Bluetooth: L2CAP socket layer initialized
  268. [    0.626084] Bluetooth: SCO socket layer initialized
  269. [    0.627035] nfc: nfc_init: NFC Core ver 0.1
  270. [    0.627445] NET: Registered protocol family 39
  271. [    0.627979] rockchip-cpuinfo cpuinfo: Serial                : e3e23f15f8a446da
  272. [    0.629394] clocksource: Switched to clocksource arch_sys_counter
  273. [    0.682108] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  274. [    0.683211] NET: Registered protocol family 2
  275. [    0.684056] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  276. [    0.684970] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
  277. [    0.686477] TCP: Hash tables configured (established 32768 bind 32768)
  278. [    0.687176] UDP hash table entries: 2048 (order: 5, 196608 bytes)
  279. [    0.687944] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
  280. [    0.688961] NET: Registered protocol family 1
  281. [    0.689675] RPC: Registered named UNIX socket transport module.
  282. [    0.690203] RPC: Registered udp transport module.
  283. [    0.690641] RPC: Registered tcp transport module.
  284. [    0.691063] RPC: Registered tcp NFSv4.1 backchannel transport module.
  285. [    0.691659] PCI: CLS 0 bytes, default 64
  286. [    0.692608] Trying to unpack rootfs image as initramfs...
  287. [    1.109824] Freeing initrd memory: 8656K
  288. [    1.110986] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  289. [    1.111827] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  290. [    1.115961] Initialise system trusted keyring
  291. [    1.124680] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  292. [    1.126006] NFS: Registering the id_resolver key type
  293. [    1.126496] Key type id_resolver registered
  294. [    1.126874] Key type id_legacy registered
  295. [    1.127251] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  296. [    1.128555] ntfs: driver 2.1.32 [Flags: R/W].
  297. [    1.129329] fuse init (API version 7.23)
  298. [    1.130040] SGI XFS with security attributes, no debug enabled
  299. [    1.136265] NET: Registered protocol family 38
  300. [    1.136706] Key type asymmetric registered
  301. [    1.137080] Asymmetric key parser 'x509' registered
  302. [    1.137712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  303. [    1.138527] io scheduler noop registered
  304. [    1.138888] io scheduler deadline registered
  305. [    1.139301] io scheduler cfq registered (default)
  306. [    1.142946] phy phy-ff770000.syscon:phy@f780.0: Looking up phy-supply from device tree
  307. [    1.142964] phy phy-ff770000.syscon:phy@f780.0: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  308. [    1.143942] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply from device tree
  309. [    1.143958] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc0-supply property in node /power-management@ff310000/power-controller failed
  310. [    1.144312] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply from device tree
  311. [    1.144326] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_tcpc1-supply property in node /power-management@ff310000/power-controller failed
  312. [    1.144662] phy phy-pcie-phy.1: Looking up phy-supply from device tree
  313. [    1.144674] phy phy-pcie-phy.1: Looking up phy-supply property in node /pcie-phy failed
  314. [    1.145003] ace test_init function.
  315. [    1.145521] ace test_init end.ret=0
  316. [    1.146220] radar end.ret=0
  317. [    1.149028] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  318. [    1.149042] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  319. [    1.149076] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  320. [    1.149326] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  321. [    1.149418] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  322. [    1.149971] pwm-backlight backlight: GPIO lookup for consumer enable
  323. [    1.149982] pwm-backlight backlight: using device tree for GPIO lookup
  324. [    1.149993] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]'
  325. [    1.150004] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]'
  326. [    1.150013] pwm-backlight backlight: using lookup tables for GPIO lookup
  327. [    1.150023] pwm-backlight backlight: lookup for GPIO enable failed
  328. [    1.150034] pwm-backlight backlight: Looking up power-supply from device tree
  329. [    1.150045] pwm-backlight backlight: Looking up power-supply property in node /backlight failed
  330. [    1.150065] backlight supply power not found, using dummy regulator
  331. [    1.151081] Module initialized.
  332. [    1.151644] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree
  333. [    1.151657] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed
  334. [    1.151678] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  335. [    1.152482] rk-vcodec ff650000.vpu_service: probe device
  336. [    1.153185] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  337. [    1.154350] rk-vcodec ff650000.vpu_service: could not find power_model node
  338. [    1.154992] rk-vcodec ff650000.vpu_service: init success
  339. [    1.155681] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree
  340. [    1.155694] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed
  341. [    1.155718] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  342. [    1.156707] rk-vcodec ff660000.rkvdec: probe device
  343. [    1.157335] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  344. [    1.158289] rk-vcodec ff660000.rkvdec: could not find power_model node
  345. [    1.158882] rk-vcodec ff660000.rkvdec: init success
  346. [    1.160909] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  347. [    1.161592] dma-pl330 ff6d0000.dma-controller:         DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  348. [    1.163884] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  349. [    1.164567] dma-pl330 ff6e0000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  350. [    1.166477] rockchip-system-monitor rockchip-system-monitor: system monitor probe
  351. [    1.167530] pwm-regulator vdd-log: GPIO lookup for consumer enable
  352. [    1.167541] pwm-regulator vdd-log: using device tree for GPIO lookup
  353. [    1.167554] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  354. [    1.167565] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  355. [    1.167574] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  356. [    1.167584] pwm-regulator vdd-log: lookup for GPIO enable failed
  357. [    1.167633] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  358. [    1.167645] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  359. [    1.167679] vdd_log: 800 <--> 1100 mV at 1007 mV
  360. [    1.167853] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  361. [    1.167865] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  362. [    1.167941] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  363. [    1.167970] vcc3v3_ngff: unable to resolve supply
  364. [    1.167981] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  365. [    1.168003] vcc3v3_pcie: unable to resolve supply
  366. [    1.168012] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  367. [    1.168022] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  368. [    1.168501] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  369. [    1.169781] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
  370. [    1.171773] [drm] Initialized drm 1.1.0 20060810
  371. [    1.176431] [drm] Rockchip DRM driver version: v1.0.1
  372. [    1.179178] mali ff9a0000.gpu: Looking up mali-supply from device tree
  373. [    1.179208] mali ff9a0000.gpu: Failed to get regulator
  374. [    1.179679] mali ff9a0000.gpu: Power control initialization failed
  375. [    1.180267] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply from device tree
  376. [    1.180281] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_gpu-supply property in node /power-management@ff310000/power-controller failed
  377. [    1.180619] Unable to detect cache hierarchy for CPU 0
  378. [    1.181866] brd: module loaded
  379. [    1.187523] loop: module loaded
  380. [    1.188345] zram: Added device: zram0
  381. [    1.189072] lkdtm: No crash points registered, enable through debugfs
  382. [    1.189752] Loading dl1825 driver
  383. [    1.191782] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  384. [    1.192954] m25p80 spi32766.0: w25q128 (16384 Kbytes)
  385. [    1.197501] register spi return v = :0
  386. [    1.197872] HSI/SSI char device loaded
  387. [    1.198736] tun: Universal TUN/TAP device driver, 1.6
  388. [    1.199183] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  389. [    1.200838] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
  390. [    1.200936] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  391. [    1.201575] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2e).
  392. [    1.202081] rk_gmac-dwmac fe300000.ethernet: RX delay(0x13).
  393. [    1.202609] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  394. [    1.203335] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  395. [    1.203963] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  396. [    1.209516] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  397. [    1.210129] stmmac - user ID: 0x10, Synopsys ID: 0x35
  398. [    1.210583]  Ring mode enabled
  399. [    1.210856]  DMA HW capability register supported
  400. [    1.211255]  Normal descriptors
  401. [    1.211570]  RX Checksum Offload Engine supported (type 2)
  402. [    1.212061]  TX Checksum insertion supported
  403. [    1.212442]  Wake-Up On Lan supported
  404. [    1.212806]  Enable RX Mitigation via HW Watchdog Timer
  405. [    1.213377] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
  406. [    1.283248] libphy: stmmac: probed
  407. [    1.283608] eth%d: PHY ID 001cc878 at 0 IRQ POLL (stmmac-0:00) active
  408. [    1.284184] eth%d: PHY ID 001cc878 at 1 IRQ POLL (stmmac-0:01)
  409. [    1.286118] PPP generic driver version 2.4.2
  410. [    1.286823] Broadcom 43xx driver loaded [ Features: PNLS ]
  411. [    1.287400] usbcore: registered new interface driver rtl8192cu
  412. [    1.287967] usbcore: registered new interface driver rndis_wlan
  413. [    1.288768] usbcore: registered new interface driver mt7601u
  414. [    1.289694] <D> We get  wifi chip!!!
  415. [    1.289695] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r)
  416. [    1.289703] ======== dhd_wlan_init_plat_data ========
  417. [    1.289707] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  418. [    1.289710] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized
  419. [    1.289714] dhd_wlan_init_gpio: unknown oob irqflags !
  420. [    1.289719] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=-1, oob_irq_flags=0x410
  421. [    1.289721] dhd_wlan_init_gpio: WL_REG_ON=-1
  422. [    1.289724] dhd_wifi_platform_load: Enter
  423. [    1.289788] Power-up adapter 'DHD generic adapter'
  424. [    1.289847] wifi_platform_set_power = 1
  425. [    1.289851] ======== PULL WL_REG_ON(-1) HIGH! ========
  426. [    1.289855] [WLAN_RFKILL]: rockchip_wifi_power: 1
  427. [    1.289858] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
  428. [    1.296720] <D> Wifi type: 3!!!
  429. [    1.297020] =======================================================
  430. [    1.297576] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
  431. [    1.298124] =======================================================
  432. [    1.298682] Realtek 8723DU USB WiFi driver (Powered by Rockchip) init.
  433. [    1.299256] [WLAN_RFKILL]: rockchip_wifi_power: 1
  434. [    1.299686] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
  435. [    1.300474] RTW: module init start
  436. [    1.300781] RTW: rtl8723du v5.6.5.1_34252.20190703_COEX20181130-2e2e
  437. [    1.301342] RTW: build time: Jan 17 2023 01:18:56
  438. [    1.301773] RTW: rtl8723du BT-Coex version = COEX20181130-2e2e
  439. [    1.302372] usbcore: registered new interface driver rtl8723du
  440. [    1.302899] RTW: module init ret=0
  441. [    1.303219] Rockchip WiFi SYS interface (V1.00) ...
  442. [    1.303740] usbcore: registered new interface driver rtl8150
  443. [    1.304285] usbcore: registered new interface driver r8152
  444. [    1.304832] usbcore: registered new interface driver asix
  445. [    1.305351] usbcore: registered new interface driver ax88179_178a
  446. [    1.305936] usbcore: registered new interface driver cdc_ether
  447. [    1.306495] usbcore: registered new interface driver rndis_host
  448. [    1.307084] usbcore: registered new interface driver cdc_ncm
  449. [    1.307637] usbcore: registered new interface driver qmi_wwan
  450. [    1.308186] usbcore: registered new interface driver cdc_mbim
  451. [    1.310262] rockchip-dwc3 usb0: failed to get drvdata dwc3
  452. [    1.310865] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply from device tree
  453. [    1.310879] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_usb3-supply property in node /power-management@ff310000/power-controller failed
  454. [    1.311814] rockchip-dwc3 usb1: failed to get drvdata dwc3
  455. [    1.313522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  456. [    1.314109] ehci-pci: EHCI PCI platform driver
  457. [    1.314565] ehci-platform: EHCI generic platform driver
  458. [    1.315773] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  459. [    1.316338] ohci-platform: OHCI generic platform driver
  460. [    1.317862] usbcore: registered new interface driver cdc_acm
  461. [    1.318367] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  462. [    1.319116] usbcore: registered new interface driver cdc_wdm
  463. [    1.319669] usbcore: registered new interface driver uas
  464. [    1.320189] usbcore: registered new interface driver usb-storage
  465. [    1.320810] usbcore: registered new interface driver usbserial
  466. [    1.321352] usbcore: registered new interface driver usbserial_generic
  467. [    1.321961] usbserial: USB Serial support registered for generic
  468. [    1.322532] usbcore: registered new interface driver ch341
  469. [    1.323045] usbserial: USB Serial support registered for ch341-uart
  470. [    1.323641] usbcore: registered new interface driver cp210x
  471. [    1.324154] usbserial: USB Serial support registered for cp210x
  472. [    1.324722] usbcore: registered new interface driver ftdi_sio
  473. [    1.325262] usbserial: USB Serial support registered for FTDI USB Serial Device
  474. [    1.325950] usbcore: registered new interface driver keyspan
  475. [    1.326487] usbserial: USB Serial support registered for Keyspan - (without firmware)
  476. [    1.327196] usbserial: USB Serial support registered for Keyspan 1 port adapter
  477. [    1.327869] usbserial: USB Serial support registered for Keyspan 2 port adapter
  478. [    1.328547] usbserial: USB Serial support registered for Keyspan 4 port adapter
  479. [    1.329221] usbcore: registered new interface driver option
  480. [    1.329752] usbserial: USB Serial support registered for GSM modem (1-port)
  481. [    1.330413] usbcore: registered new interface driver oti6858
  482. [    1.330937] usbserial: USB Serial support registered for oti6858
  483. [    1.331508] usbcore: registered new interface driver pl2303
  484. [    1.332022] usbserial: USB Serial support registered for pl2303
  485. [    1.332591] usbcore: registered new interface driver qcserial
  486. [    1.333127] usbserial: USB Serial support registered for Qualcomm USB modem
  487. [    1.333790] usbcore: registered new interface driver sierra
  488. [    1.334304] usbserial: USB Serial support registered for Sierra USB modem
  489. [    1.335895] usbcore: registered new interface driver usbtouchscreen
  490. [    1.336772] .. rk pwm remotectl v1.1 init
  491. [    1.337407] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
  492. [    1.338522] sensor_register_slave:mma8452,id=17
  493. [    1.338930] sensor_register_slave:lis3dh,id=7
  494. [    1.339324] sensor_register_slave:mma7660,id=18
  495. [    1.339739] sensor_register_slave:lsm303d,id=22
  496. [    1.340144] sensor_register_slave:gs_mc3230,id=23
  497. [    1.340576] [Gsensor]   gsensor_init
  498. [    1.340902] sensor_register_slave:mpu6880_acc,id=24
  499. [    1.341342] sensor_register_slave:mpu6500_acc,id=25
  500. [    1.341790] sensor_register_slave:lsm330_acc,id=26
  501. [    1.342219] sensor_register_slave:akm8975,id=30
  502. [    1.342631] sensor_register_slave:akm8963,id=31
  503. [    1.343037] sensor_register_slave:l3g4200d,id=45
  504. [    1.343463] sensor_register_slave:l3g20d,id=46
  505. [    1.343868] sensor_register_slave:ewtsa,id=47
  506. [    1.344262] sensor_register_slave:lsm330_gyro,id=51
  507. [    1.344709] sensor_register_slave:cm3217,id=53
  508. [    1.345114] sensor_register_slave:cm3218,id=54
  509. [    1.346014] i2c /dev entries driver
  510. [    1.347194] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  511. [    1.347207] fan53555-regulator 0-0040: using device tree for GPIO lookup
  512. [    1.347240] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  513. [    1.347611] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  514. [    1.348232] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  515. [    1.348297] fan53555-reg: supplied by vcc5v0_sys
  516. [    1.350072] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV
  517. [    1.350466] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  518. [    1.350498] vcc3v3_ngff: unable to resolve supply
  519. [    1.350509] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  520. [    1.350532] vcc3v3_pcie: unable to resolve supply
  521. [    1.350543] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  522. [    1.350555] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  523. [    1.350798] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  524. [    1.350808] fan53555-regulator 0-0041: using device tree for GPIO lookup
  525. [    1.350838] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  526. [    1.351182] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  527. [    1.351813] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  528. [    1.351859] fan53555-reg: supplied by vcc5v0_sys
  529. [    1.353612] vdd_gpu: 712 <--> 1500 mV at 1000 mV
  530. [    1.353965] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  531. [    1.353993] vcc3v3_ngff: unable to resolve supply
  532. [    1.354003] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  533. [    1.354026] vcc3v3_pcie: unable to resolve supply
  534. [    1.354036] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  535. [    1.354047] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  536. [    1.354751] rk808 0-001b: Pmic Chip id: 0x0
  537. [    1.358537] rk808 0-001b: GPIO lookup for consumer dvs
  538. [    1.358549] rk808 0-001b: using device tree for GPIO lookup
  539. [    1.358562] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  540. [    1.358573] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  541. [    1.358582] rk808 0-001b: using lookup tables for GPIO lookup
  542. [    1.358592] rk808 0-001b: lookup for GPIO dvs failed
  543. [    1.358602] rk808-regulator rk808-regulator: there is no dvs0 gpio
  544. [    1.359152] rk808 0-001b: GPIO lookup for consumer dvs
  545. [    1.359161] rk808 0-001b: using device tree for GPIO lookup
  546. [    1.359171] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  547. [    1.359181] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  548. [    1.359190] rk808 0-001b: using lookup tables for GPIO lookup
  549. [    1.359198] rk808 0-001b: lookup for GPIO dvs failed
  550. [    1.359208] rk808-regulator rk808-regulator: there is no dvs1 gpio
  551. [    1.359806] rk808 0-001b: Looking up vcc1-supply from device tree
  552. [    1.359885] DCDC_REG1: supplied by vcc3v3_sys
  553. [    1.360708] vdd_center: 750 <--> 1350 mV at 900 mV
  554. [    1.360956] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  555. [    1.360987] vcc3v3_ngff: unable to resolve supply
  556. [    1.360998] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  557. [    1.361022] vcc3v3_pcie: unable to resolve supply
  558. [    1.361033] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  559. [    1.361045] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  560. [    1.361099] rk808 0-001b: Looking up vcc2-supply from device tree
  561. [    1.361142] DCDC_REG2: supplied by vcc3v3_sys
  562. [    1.361832] vdd_cpu_l: 750 <--> 1350 mV at 900 mV
  563. [    1.362045] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  564. [    1.362071] vcc3v3_ngff: unable to resolve supply
  565. [    1.362081] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  566. [    1.362104] vcc3v3_pcie: unable to resolve supply
  567. [    1.362113] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  568. [    1.362125] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  569. [    1.362179] rk808 0-001b: Looking up vcc3-supply from device tree
  570. [    1.362218] DCDC_REG3: supplied by vcc3v3_sys
  571. [    1.362660] vcc_ddr: at 3300 mV
  572. [    1.362849] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  573. [    1.362876] vcc3v3_ngff: unable to resolve supply
  574. [    1.362885] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  575. [    1.362908] vcc3v3_pcie: unable to resolve supply
  576. [    1.362918] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  577. [    1.362929] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  578. [    1.362984] rk808 0-001b: Looking up vcc4-supply from device tree
  579. [    1.363022] DCDC_REG4: supplied by vcc3v3_sys
  580. [    1.363592] vcc_1v8: 1800 mV
  581. [    1.363813] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  582. [    1.363840] vcc3v3_ngff: unable to resolve supply
  583. [    1.363850] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  584. [    1.363874] vcc3v3_pcie: unable to resolve supply
  585. [    1.363883] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  586. [    1.363894] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  587. [    1.363950] rk808 0-001b: Looking up vcc6-supply from device tree
  588. [    1.363989] LDO_REG1: supplied by vcc3v3_sys
  589. [    1.365210] vcca1v8_codec: 1800 mV
  590. [    1.365448] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  591. [    1.365476] vcc3v3_ngff: unable to resolve supply
  592. [    1.365486] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  593. [    1.365511] vcc3v3_pcie: unable to resolve supply
  594. [    1.365520] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  595. [    1.365531] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  596. [    1.365588] rk808 0-001b: Looking up vcc6-supply from device tree
  597. [    1.365628] LDO_REG2: supplied by vcc3v3_sys
  598. [    1.366695] vcc1v8_hdmi: 1800 mV
  599. [    1.366922] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  600. [    1.366952] vcc3v3_ngff: unable to resolve supply
  601. [    1.366962] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  602. [    1.366987] vcc3v3_pcie: unable to resolve supply
  603. [    1.366996] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  604. [    1.367007] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  605. [    1.367067] rk808 0-001b: Looking up vcc7-supply from device tree
  606. [    1.367107] LDO_REG3: supplied by vcc3v3_sys
  607. [    1.368187] vcc1v8_pmu: 1800 mV
  608. [    1.368414] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  609. [    1.368444] vcc3v3_ngff: unable to resolve supply
  610. [    1.368453] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  611. [    1.368477] vcc3v3_pcie: unable to resolve supply
  612. [    1.368487] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  613. [    1.368497] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  614. [    1.368559] rk808 0-001b: Looking up vcc9-supply from device tree
  615. [    1.368598] LDO_REG4: supplied by vcc3v3_sys
  616. [    1.369674] vccio_sd: 1800 <--> 3000 mV at 3000 mV
  617. [    1.369891] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  618. [    1.369921] vcc3v3_ngff: unable to resolve supply
  619. [    1.369930] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  620. [    1.369956] vcc3v3_pcie: unable to resolve supply
  621. [    1.369965] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  622. [    1.369976] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  623. [    1.370046] rk808 0-001b: Looking up vcc9-supply from device tree
  624. [    1.370084] LDO_REG5: supplied by vcc3v3_sys
  625. [    1.371176] vcca3v0_codec: 3000 mV
  626. [    1.371403] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  627. [    1.371432] vcc3v3_ngff: unable to resolve supply
  628. [    1.371442] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  629. [    1.371468] vcc3v3_pcie: unable to resolve supply
  630. [    1.371478] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  631. [    1.371488] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  632. [    1.371554] rk808 0-001b: Looking up vcc10-supply from device tree
  633. [    1.371595] LDO_REG6: supplied by vcc3v3_sys
  634. [    1.372659] vcc_1v5: 1500 mV
  635. [    1.372882] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  636. [    1.372912] vcc3v3_ngff: unable to resolve supply
  637. [    1.372922] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  638. [    1.372947] vcc3v3_pcie: unable to resolve supply
  639. [    1.372957] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  640. [    1.372968] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  641. [    1.373036] rk808 0-001b: Looking up vcc7-supply from device tree
  642. [    1.373077] LDO_REG7: supplied by vcc3v3_sys
  643. [    1.374153] vcca0v9_hdmi: 900 mV
  644. [    1.374376] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  645. [    1.374420] vcc3v3_ngff: unable to resolve supply
  646. [    1.374431] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  647. [    1.374457] vcc3v3_pcie: unable to resolve supply
  648. [    1.374466] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  649. [    1.374477] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  650. [    1.374546] rk808 0-001b: Looking up vcc11-supply from device tree
  651. [    1.374586] LDO_REG8: supplied by vcc3v3_sys
  652. [    1.375648] vcc_3v0: 3000 mV
  653. [    1.375870] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  654. [    1.375900] vcc3v3_ngff: unable to resolve supply
  655. [    1.375910] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  656. [    1.375936] vcc3v3_pcie: unable to resolve supply
  657. [    1.375946] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  658. [    1.375957] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  659. [    1.376025] rk808 0-001b: Looking up vcc8-supply from device tree
  660. [    1.376064] SWITCH_REG1: supplied by vcc3v3_sys
  661. [    1.376508] vcc3v3_s3: at 3300 mV
  662. [    1.376703] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  663. [    1.376733] vcc3v3_ngff: unable to resolve supply
  664. [    1.376743] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  665. [    1.376769] vcc3v3_pcie: unable to resolve supply
  666. [    1.376779] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  667. [    1.376790] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  668. [    1.376860] rk808 0-001b: Looking up vcc12-supply from device tree
  669. [    1.376899] SWITCH_REG2: supplied by vcc3v3_sys
  670. [    1.377337] vcc3v3_s0: at 3300 mV
  671. [    1.377533] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  672. [    1.377564] vcc3v3_ngff: unable to resolve supply
  673. [    1.377574] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  674. [    1.377601] vcc3v3_pcie: unable to resolve supply
  675. [    1.377610] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  676. [    1.377621] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
  677. [    1.377857] rk808-rtc rk808-rtc: device is disabled
  678. [    1.378298] rk808-rtc: probe of rk808-rtc failed with error -22
  679. [    1.378880] of_get_named_gpiod_flags: parsed 'pmic,hold-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' - status (0)
  680. [    1.378923] of_get_named_gpiod_flags: can't parse 'pmic,stby-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  681. [    1.378933] rk808 0-001b: Can not read property pmic,stby-gpio
  682. [    1.381978] rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0
  683. [    1.382950] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009bcc000
  684. [    1.384502] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009bce000
  685. [    1.385732] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff8009bd0000
  686. [    1.387098] fusb302 7-0022: GPIO lookup for consumer int-n
  687. [    1.387111] fusb302 7-0022: using device tree for GPIO lookup
  688. [    1.387143] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff160000/fusb30x@22[0]' - status (0)
  689. [    1.387171] fusb302 7-0022: GPIO lookup for consumer vbus-5v
  690. [    1.387180] fusb302 7-0022: using device tree for GPIO lookup
  691. [    1.387191] of_get_named_gpiod_flags: can't parse 'vbus-5v-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
  692. [    1.387201] of_get_named_gpiod_flags: can't parse 'vbus-5v-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
  693. [    1.387211] fusb302 7-0022: using lookup tables for GPIO lookup
  694. [    1.387221] fusb302 7-0022: lookup for GPIO vbus-5v failed
  695. [    1.387231] fusb302 7-0022: GPIO lookup for consumer vbus-other
  696. [    1.387239] fusb302 7-0022: using device tree for GPIO lookup
  697. [    1.387249] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
  698. [    1.387259] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
  699. [    1.387267] fusb302 7-0022: using lookup tables for GPIO lookup
  700. [    1.387276] fusb302 7-0022: lookup for GPIO vbus-other failed
  701. [    1.387285] fusb302 7-0022: GPIO lookup for consumer discharge
  702. [    1.387294] fusb302 7-0022: using device tree for GPIO lookup
  703. [    1.387304] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
  704. [    1.387313] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
  705. [    1.387322] fusb302 7-0022: using lookup tables for GPIO lookup
  706. [    1.387330] fusb302 7-0022: lookup for GPIO discharge failed
  707. [    1.387340] fusb302 7-0022: GPIO lookup for consumer charge-en
  708. [    1.387348] fusb302 7-0022: using device tree for GPIO lookup
  709. [    1.387358] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
  710. [    1.387367] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
  711. [    1.387376] fusb302 7-0022: using lookup tables for GPIO lookup
  712. [    1.387404] fusb302 7-0022: lookup for GPIO charge-en failed
  713. [    1.387695] fusb302 7-0022: fusb302 send extcon to disable vbus 5v
  714. [    1.391302] fusb302 7-0022: port 0 probe success with role ROLE_MODE_DFP, try_role ROLE_MODE_NONE
  715. [    1.392268] input: Typec_Headphone as /devices/platform/ff160000.i2c/i2c-7/7-0022/input/input1
  716. [    1.393327] mp8859 7-0066: GPIO lookup for consumer charge-en
  717. [    1.393337] mp8859 7-0066: using device tree for GPIO lookup
  718. [    1.393348] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff160000/mp8859@66[0]'
  719. [    1.393358] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff160000/mp8859@66[0]'
  720. [    1.393367] mp8859 7-0066: using lookup tables for GPIO lookup
  721. [    1.393376] mp8859 7-0066: lookup for GPIO charge-en failed
  722. [    1.393559] mp8859 7-0066: failed to set slew_rate
  723. [    1.393985] mp8859 7-0066: register ext0 dev0
  724. [    1.394485] mp8859 7-0066: mp8859 probe successful
  725. [    1.394934] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff8009bd2000
  726. [    1.396451] rockchip-pinctrl pinctrl: pin gpio1-1 already requested by fan-regulator; cannot claim for 4-0022
  727. [    1.397322] rockchip-pinctrl pinctrl: pin-33 (4-0022) status -22
  728. [    1.397877] rockchip-pinctrl pinctrl: could not request pin 33 (gpio1-1) from group fusb1-int  on device rockchip-pinctrl
  729. [    1.398846] fusb302 4-0022: Error applying setting, reverse things back
  730. [    1.399514] fusb302 4-0022: GPIO lookup for consumer int-n
  731. [    1.399524] fusb302 4-0022: using device tree for GPIO lookup
  732. [    1.399558] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  733. [    1.399568] gpio-33 (fan_enable): gpiod_request: status -16
  734. [    1.399641] fusb302: probe of 4-0022 failed with error -16
  735. [    1.400165] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009bd4000
  736. [    1.402091] IR NEC protocol handler initialized
  737. [    1.403328] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
  738. [    1.403927] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
  739. [    1.405840] rkisp1 ff910000.rkisp1: GPIO lookup for consumer vsirq
  740. [    1.405852] rkisp1 ff910000.rkisp1: using device tree for GPIO lookup
  741. [    1.405865] of_get_named_gpiod_flags: can't parse 'vsirq-gpios' property of node '/rkisp1@ff910000[0]'
  742. [    1.405875] of_get_named_gpiod_flags: can't parse 'vsirq-gpio' property of node '/rkisp1@ff910000[0]'
  743. [    1.405884] rkisp1 ff910000.rkisp1: using lookup tables for GPIO lookup
  744. [    1.405894] rkisp1 ff910000.rkisp1: lookup for GPIO vsirq failed
  745. [    1.406225] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
  746. [    1.406826] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
  747. [    1.408624] rkisp1 ff920000.rkisp1: GPIO lookup for consumer vsirq
  748. [    1.408636] rkisp1 ff920000.rkisp1: using device tree for GPIO lookup
  749. [    1.408648] of_get_named_gpiod_flags: can't parse 'vsirq-gpios' property of node '/rkisp1@ff920000[0]'
  750. [    1.408658] of_get_named_gpiod_flags: can't parse 'vsirq-gpio' property of node '/rkisp1@ff920000[0]'
  751. [    1.408667] rkisp1 ff920000.rkisp1: using lookup tables for GPIO lookup
  752. [    1.408677] rkisp1 ff920000.rkisp1: lookup for GPIO vsirq failed
  753. [    1.408936] usbcore: registered new interface driver npu_acm
  754. [    1.409530] usbcore: registered new interface driver uvcvideo
  755. [    1.410044] USB Video Class driver (1.1.1)
  756. [    1.410492] cw201x 2-0062: design_capacity missing!
  757. [    1.411103] cw_bat_probe cw_init error
  758. [    1.412187] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  759. [    1.412430] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  760. [    1.412495] rockchip-iodomain ff770000.syscon:io-domains: Looking up wifi-supply from device tree
  761. [    1.412507] rockchip-iodomain ff770000.syscon:io-domains: Looking up wifi-supply property in node /syscon@ff770000/io-domains failed
  762. [    1.412540] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  763. [    1.412616] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  764. [    1.412679] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  765. [    1.413592] Boot mode: coldboot
  766. [    1.414984] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  767. [    1.415946] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  768. [    1.417211] dw_wdt ff848000.watchdog: Should better to setup a 'resets' property in dt, that must been named with reset
  769. [    1.418832] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  770. [    1.419754] rtk_btusb: Realtek Bluetooth USB driver ver 3.1.a2fd257.20190430-133301
  771. [    1.420448] rtk_btcoex: rtk_btcoex_init: version: 1.2
  772. [    1.420893] rtk_btcoex: create workqueue
  773. [    1.421245] rtk_btcoex: Coex over UDP
  774. [    1.421819] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
  775. [    1.422415] usbcore: registered new interface driver rtk_btusb
  776. [    1.422938] Bluetooth: Virtual HCI driver ver 1.5
  777. [    1.423490] Bluetooth: HCI UART driver ver 2.3
  778. [    1.423892] Bluetooth: HCI UART protocol H4 registered
  779. [    1.424350] Bluetooth: HCI UART protocol BCSP registered
  780. [    1.424834] Bluetooth: HCI UART protocol LL registered
  781. [    1.425292] Bluetooth: HCI UART protocol ATH3K registered
  782. [    1.425918] Bluetooth: HCI UART protocol Intel registered
  783. [    1.426462] usbcore: registered new interface driver bfusb
  784. [    1.426995] usbcore: registered new interface driver btusb
  785. [    1.428014] cpu cpu0: bin=1
  786. [    1.428318] cpu cpu0: leakage=23
  787. [    1.428653] cpu cpu0: Looking up cpu-supply from device tree
  788. [    1.440729] cpu cpu0: temp=36250, pvtm=147497 (148072 + -575)
  789. [    1.441448] cpu cpu0: pvtm-volt-sel=1
  790. [    1.441834] cpu cpu0: bin-scale=34
  791. [    1.442483] cpu cpu4: bin=1
  792. [    1.442786] cpu cpu4: leakage=41
  793. [    1.443102] cpu cpu4: Looking up cpu-supply from device tree
  794. [    1.455253] cpu cpu4: temp=36250, pvtm=158826 (159181 + -355)
  795. [    1.455873] cpu cpu4: pvtm-volt-sel=2
  796. [    1.456248] cpu cpu4: bin-scale=17
  797. [    1.456881] cpu cpu0: Looking up cpu-supply from device tree
  798. [    1.457157] cpu cpu0: Looking up cpu-supply from device tree
  799. [    1.457752] cpu cpu0: avs=0
  800. [    1.458107] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
  801. [    1.459269] cpu cpu0: failed to find power_model node
  802. [    1.460092] cpu cpu4: Looking up cpu-supply from device tree
  803. [    1.460736] cpu cpu4: avs=0
  804. [    1.461091] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
  805. [    1.463055] cpu cpu4: failed to find power_model node
  806. [    1.464398] sdhci: Secure Digital Host Controller Interface driver
  807. [    1.464948] sdhci: Copyright(c) Pierre Ossman
  808. [    1.465340] Synopsys Designware Multimedia Card Interface Driver
  809. [    1.466824] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  810. [    1.467512] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  811. [    1.468119] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  812. [    1.468691] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  813. [    1.469580] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  814. [    1.469657] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  815. [    1.469694] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  816. [    1.469822] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply from device tree
  817. [    1.469836] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_sdioaudio-supply property in node /power-management@ff310000/power-controller failed
  818. [    1.470583] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  819. [    1.471246] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  820. [    1.471867] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  821. [    1.472424] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  822. [    1.473293] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  823. [    1.474020] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  824. [    1.474135] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  825. [    1.474213] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  826. [    1.474222] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  827. [    1.474235] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  828. [    1.474246] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  829. [    1.474256] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  830. [    1.474265] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  831. [    1.474277] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  832. [    1.474286] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  833. [    1.474296] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  834. [    1.474306] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  835. [    1.474315] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  836. [    1.474324] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  837. [    1.474505] vccio_sd: unsupportable voltage range: 3300000-3000000uV
  838. [    1.475080] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  839. [    1.475753] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
  840. [    1.488991] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  841. [    1.502464] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  842. [    1.503398] sdhci-pltfm: SDHCI platform and OF driver helper
  843. [    1.504500] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  844. [    1.504512] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  845. [    1.504524] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  846. [    1.504535] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  847. [    1.504545] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  848. [    1.504554] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  849. [    1.505656] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  850. [    1.505669] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  851. [    1.505710] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  852. [    1.505721] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  853. [    1.505748] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  854. [    1.506287] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  855. [    1.537180] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  856. [    1.539360] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power[0]' - status (0)
  857. [    1.539662] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/user[0]' - status (0)
  858. [    1.540136] hidraw: raw HID events driver (C) Jiri Kosina
  859. [    1.541274] usbcore: registered new interface driver usbhid
  860. [    1.541811] usbhid: USB HID core driver
  861. [    1.542330] inv_mpu_iio: inv_mpu_init:746
  862. [    1.543523] rk808-clkout: probe of rk808-clkout failed with error -17
  863. [    1.545350] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  864. [    1.546966] usbcore: registered new interface driver snd-usb-audio
  865. [    1.548695] of_get_named_gpiod_flags: can't parse 'spk-ctl-gpio' property of node '/i2c@ff110000/es8388@11[0]'
  866. [    1.548710] ES8323 1-0011: Can not read property spk_ctl_gpio
  867. [    1.549251] of_get_named_gpiod_flags: parsed 'hp-ctl-gpio' property of node '/i2c@ff110000/es8388@11[0]' - status (0)
  868. [    1.549307] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8388@11[0]' - status (0)
  869. [    1.549319] gpio-70 (pmic-hold-gpio): gpiod_request: status -16
  870. [    1.549330] ES8323 1-0011: Failed to request hp_det_gpio
  871. [    1.549847] ES8323: probe of 1-0011 failed with error -16
  872. [    1.555602] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
  873. [    1.556288] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
  874. [    1.557217] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  875. [    1.558273] IPVS: Registered protocols (TCP, UDP)
  876. [    1.558764] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  877. [    1.559528] IPVS: Creating netns size=2104 id=0
  878. [    1.559957] IPVS: ipvs loaded.
  879. [    1.560239] IPVS: [rr] scheduler registered.
  880. [    1.560911] ip_tables: (C) 2000-2006 Netfilter Core Team
  881. [    1.561502] Initializing XFRM netlink socket
  882. [    1.562557] NET: Registered protocol family 10
  883. [    1.563808] NET: Registered protocol family 17
  884. [    1.564231] NET: Registered protocol family 15
  885. [    1.564681] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  886. [    1.565816] Bridge firewalling registered
  887. [    1.566376] Bluetooth: RFCOMM TTY layer initialized
  888. [    1.566890] Bluetooth: RFCOMM socket layer initialized
  889. [    1.567370] Bluetooth: RFCOMM ver 1.11
  890. [    1.567743] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  891. [    1.568213] Bluetooth: BNEP filters: protocol multicast
  892. [    1.568697] Bluetooth: BNEP socket layer initialized
  893. [    1.569151] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  894. [    1.569691] Bluetooth: HIDP socket layer initialized
  895. [    1.570196] [WLAN_RFKILL]: Enter rfkill_wlan_init
  896. [    1.570977] <rfkill_wlan_init> result: 0
  897. [    1.571340] [BT_RFKILL]: Enter rfkill_rk_init
  898. [    1.571963] Key type dns_resolver registered
  899. [    1.572743] sensor_register_slave:mpu6880_gyro,id=50
  900. [    1.574081] ov13850 1-0036: driver version: 00.01.03
  901. [    1.574597] ov13850 1-0036: GPIO lookup for consumer reset
  902. [    1.574610] ov13850 1-0036: using device tree for GPIO lookup
  903. [    1.574653] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/ov13850@36[0]' - status (0)
  904. [    1.574715] ov13850 1-0036: Looking up avdd-supply from device tree
  905. [    1.574940] ov13850 1-0036: Looking up dovdd-supply from device tree
  906. [    1.575046] ov13850 1-0036: Looking up dvdd-supply from device tree
  907. [    1.575488] ov13850 1-0036: GPIO lookup for consumer pwdn
  908. [    1.575502] ov13850 1-0036: using device tree for GPIO lookup
  909. [    1.575546] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff110000/ov13850@36[0]' - status (0)
  910. [    1.578448] ov13850 1-0036: write SCCB_ID failed
  911. [    1.579181] ov13850: probe of 1-0036 failed with error -5
  912. [    1.580384] ov13850 1-0046: driver version: 00.01.03
  913. [    1.580895] ov13850 1-0046: GPIO lookup for consumer reset
  914. [    1.580908] ov13850 1-0046: using device tree for GPIO lookup
  915. [    1.580951] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/ov13850@46[0]' - status (0)
  916. [    1.580996] ov13850 1-0046: Looking up avdd-supply from device tree
  917. [    1.581188] ov13850 1-0046: Looking up dovdd-supply from device tree
  918. [    1.581324] ov13850 1-0046: Looking up dvdd-supply from device tree
  919. [    1.581703] ov13850 1-0046: GPIO lookup for consumer pwdn
  920. [    1.581716] ov13850 1-0046: using device tree for GPIO lookup
  921. [    1.581758] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff110000/ov13850@46[0]' - status (0)
  922. [    1.584138] ov13850 1-0046: write SCCB_ID failed
  923. [    1.584775] ov13850: probe of 1-0046 failed with error -5
  924. [    1.585761] mmc1: new HS400 Enhanced strobe MMC card at address 0001
  925. [    1.586331] Registered cp15_barrier emulation handler
  926. [    1.586979] Registered setend emulation handler
  927. [    1.587428] mmcblk1: mmc1:0001 Y2P032 29.1 GiB
  928. [    1.588310] Loading compiled-in X.509 certificates
  929. [    1.588683] mmcblk1boot0: mmc1:0001 Y2P032 partition 1 4.00 MiB
  930. [    1.589204] mmcblk1boot1: mmc1:0001 Y2P032 partition 2 4.00 MiB
  931. [    1.589835] mmcblk1rpmb: mmc1:0001 Y2P032 partition 3 16.0 MiB
  932. [    1.590492] wifi_platform_bus_enumerate device present 1
  933. [    1.590963] ======== Card detection to detect SDIO card! ========
  934. [    1.591548] sdio: host isn't  initialization successfully.
  935. [    1.592915] Btrfs loaded
  936. [    1.595161] rga2: Driver loaded successfully ver:3.02
  937. [    1.595196]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
  938. [    1.596112] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply from device tree
  939. [    1.596141] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_rga-supply property in node /power-management@ff310000/power-controller failed
  940. [    1.596629] rga2: Module initialized.
  941. [    1.597789] phy phy-ff770000.syscon:usb2-phy@e450.2: Looking up phy-supply from device tree
  942. [    1.598622] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up phy-supply from device tree
  943. [    1.598642] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  944. [    1.598816] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up vbus-supply from device tree
  945. [    1.598833] phy phy-ff770000.syscon:usb2-phy@e450.3: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  946. [    1.598864] phy phy-ff770000.syscon:usb2-phy@e450.3: Failed to get VBUS supply regulator
  947. [    1.602108] phy phy-ff7c0000.phy.4: Looking up phy-supply from device tree
  948. [    1.602131] phy phy-ff7c0000.phy.4: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  949. [    1.602311] phy phy-ff7c0000.phy.5: Looking up phy-supply from device tree
  950. [    1.602326] phy phy-ff7c0000.phy.5: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  951. [    1.604539] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  952. [    1.604558] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  953. [    1.604615] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  954. [    1.604906] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  955. [    1.605051] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  956. [    1.606844] mali ff9a0000.gpu: Looking up mali-supply from device tree
  957. [    1.607230] mali ff9a0000.gpu: leakage=27
  958. [    1.607653] mali ff9a0000.gpu: Looking up mali-supply from device tree
  959. [    1.607694] vdd_gpu: could not add device link ff9a0000.gpu err -17
  960. [    1.607712] vdd_gpu: Failed to create debugfs directory
  961. [    1.620654] mali ff9a0000.gpu: temp=35625, pvtm=127741 (128017 + -276)
  962. [    1.623351] mali ff9a0000.gpu: pvtm-volt-sel=2
  963. [    1.624731] mali ff9a0000.gpu: avs=0
  964. [    1.626531] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  965. [    1.629244] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
  966. [    1.630187] I : [File] : drivers/gpu/arm/midgard_for_linux/backend/gpu/mali_kbase_devfreq.c; [Line] : 315; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  967. [    1.632883] mali ff9a0000.gpu: Probed as mali0
  968. [    1.639032] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  969. [    1.639874] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1
  970. [    1.640817] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
  971. [    1.641696] xhci-hcd xhci-hcd.4.auto: irq 230, io mem 0xfe800000
  972. [    1.642640] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  973. [    1.643253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  974. [    1.643933] usb usb1: Product: xHCI Host Controller
  975. [    1.644384] usb usb1: Manufacturer: Linux 4.4.194 xhci-hcd
  976. [    1.644899] usb usb1: SerialNumber: xhci-hcd.4.auto
  977. [    1.646246] hub 1-0:1.0: USB hub found
  978. [    1.646681] hub 1-0:1.0: 1 port detected
  979. [    1.647634] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  980. [    1.648526] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
  981. [    1.649325] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  982. [    1.650261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  983. [    1.650896] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  984. [    1.651560] usb usb2: Product: xHCI Host Controller
  985. [    1.652010] usb usb2: Manufacturer: Linux 4.4.194 xhci-hcd
  986. [    1.652530] usb usb2: SerialNumber: xhci-hcd.4.auto
  987. [    1.653882] hub 2-0:1.0: USB hub found
  988. [    1.654270] hub 2-0:1.0: 1 port detected
  989. [    1.657070] xhci-hcd xhci-hcd.4.auto: remove, state 1
  990. [    1.657593] usb usb2: USB disconnect, device number 1
  991. [    1.660864] rockchip-dwc3 usb1: failed to get drvdata dwc3
  992. [    1.664604] ehci-platform fe380000.usb: EHCI Host Controller
  993. [    1.665452] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 3
  994. [    1.666333] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  995. [    1.672509] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  996. [    1.673348] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  997. [    1.673990] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  998. [    1.674648] usb usb3: Product: EHCI Host Controller
  999. [    1.675074] xhci-hcd xhci-hcd.4.auto: Host not halted after 16000 microseconds.
  1000. [    1.675085] xhci-hcd xhci-hcd.4.auto: Host controller not halted, aborting reset.
  1001. [    1.675171] xhci-hcd xhci-hcd.4.auto: USB bus 2 deregistered
  1002. [    1.676944] usb usb3: Manufacturer: Linux 4.4.194 ehci_hcd
  1003. [    1.677457] usb usb3: SerialNumber: fe380000.usb
  1004. [    1.678829] hub 3-0:1.0: USB hub found
  1005. [    1.679219] hub 3-0:1.0: 1 port detected
  1006. [    1.680443] xhci-hcd xhci-hcd.4.auto: remove, state 1
  1007. [    1.680925] usb usb1: USB disconnect, device number 1
  1008. [    1.682466] xhci-hcd xhci-hcd.4.auto: USB bus 1 deregistered
  1009. [    1.685174] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  1010. [    1.686118] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 1
  1011. [    1.687013] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  1012. [    1.742964] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  1013. [    1.743604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1014. [    1.744247] usb usb1: Product: Generic Platform OHCI controller
  1015. [    1.744788] usb usb1: Manufacturer: Linux 4.4.194 ohci_hcd
  1016. [    1.745282] usb usb1: SerialNumber: fe3a0000.usb
  1017. [    1.747238] hub 1-0:1.0: USB hub found
  1018. [    1.747724] hub 1-0:1.0: 1 port detected
  1019. [    1.751568] input: adc-keys as /devices/platform/adc-keys/input/input2
  1020. [    1.754517] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  1021. [    1.755224] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  1022. [    1.755865] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  1023. [    1.756448] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  1024. [    1.757357] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  1025. [    1.757528] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  1026. [    1.757601] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  1027. [    1.759931] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
  1028. [    1.760655] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
  1029. [    1.764266] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  1030. [    1.764290] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  1031. [    1.764352] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  1032. [    1.764781] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  1033. [    1.764899] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  1034. [    1.768530] rockchip-dwc3 usb1: failed to get drvdata dwc3
  1035. [    1.772720] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0)
  1036. [    1.772809] gpio-5 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations
  1037. [    1.772843] genirq: Flags mismatch irq 74. 00000083 (GPIO Key Power) vs. 00002008 (hym8563)
  1038. [    1.773631] gpio-keys gpio-keys: Unable to claim irq 74; error -16
  1039. [    1.774226] gpio-keys: probe of gpio-keys failed with error -16
  1040. [    1.774873] ==gsl_ts_init==
  1041. [    1.775249] ret=0
  1042. [    1.775838] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply from device tree
  1043. [    1.775865] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_edp-supply property in node /power-management@ff310000/power-controller failed
  1044. [    1.775972] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply from device tree
  1045. [    1.775995] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_iep-supply property in node /power-management@ff310000/power-controller failed
  1046. [    1.776831] rtc-hym8563 0-0051: setting system clock to 2023-01-17 07:47:27 UTC (1673941647)
  1047. [    1.809303] vcc_sd: disabling
  1048. [    1.809614] vcc_mipi: disabling
  1049. [    1.809900] dvdd_1v2: disabling
  1050. [    1.810187] vcc3v3_pcie: disabling
  1051. [    1.811510] ret 1024
  1052. [    1.812138] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply from device tree
  1053. [    1.812156] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vdu-supply property in node /power-management@ff310000/power-controller failed
  1054. [    1.812241] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply from device tree
  1055. [    1.812254] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_vcodec-supply property in node /power-management@ff310000/power-controller failed
  1056. [    1.812323] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '01:18:04', on 'Jan 17 2023'.
  1057. [    1.814532] Mali: Mali device driver loaded
  1058. [    1.815144] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
  1059. [    1.817530] rockchip-mipi-dphy-rx: No link between dphy and sensor
  1060. [    1.818112] rockchip-mipi-dphy-rx: No link between dphy and sensor
  1061. [    1.818749] rkisp1: update sensor failed
  1062. [    1.819114] rkisp1: subdev link fail, remove isp device
  1063. [    1.824998] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply from device tree
  1064. [    1.825022] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp0-supply property in node /power-management@ff310000/power-controller failed
  1065. [    1.825204] iommu: Removing device ff910000.rkisp1 from group 4
  1066. [    1.825802] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
  1067. [    1.826607] rockchip-mipi-dphy-rx: No link between dphy and sensor
  1068. [    1.827158] rockchip-mipi-dphy-rx: No link between dphy and sensor
  1069. [    1.827748] rkisp1: update sensor failed
  1070. [    1.828102] rkisp1: subdev link fail, remove isp device
  1071. [    1.829516] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply from device tree
  1072. [    1.829531] rockchip-pm-domain ff310000.power-management:power-controller: Looking up pd_isp1-supply property in node /power-management@ff310000/power-controller failed
  1073. [    1.829625] iommu: Removing device ff920000.rkisp1 from group 5
  1074. [    1.831369] ALSA device list:
  1075. [    1.831712]   No soundcards found.
  1076. [    1.833312] Freeing unused kernel memory: 1216K
  1077. [    2.118502] vendor storage:20190527 ret = 0
  1078. [    3.591517] failed to power up DHD generic adapter, 1 retry left
  1079. [    3.608284] wifi_platform_set_power = 0
  1080. [    3.608678] ======== PULL WL_REG_ON(-1) LOW! ========
  1081. [    3.609139] [WLAN_RFKILL]: rockchip_wifi_power: 0
  1082. [    3.609613] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
  1083. [    3.609624] wifi_platform_bus_enumerate device present 0
  1084. [    3.609629] ======== Card detection to remove SDIO card! ========
  1085. [    3.609634] sdio: host isn't  initialization successfully.
  1086. [    3.609737] wifi_platform_set_power = 1
  1087. [    3.609741] ======== PULL WL_REG_ON(-1) HIGH! ========
  1088. [    3.609747] [WLAN_RFKILL]: rockchip_wifi_power: 1
  1089. [    3.609753] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
  1090. [    3.910540] wifi_platform_bus_enumerate device present 1
  1091. [    3.911034] ======== Card detection to detect SDIO card! ========
  1092. [    3.911592] sdio: host isn't  initialization successfully.
  1093. [    4.156205] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null)
  1094. [    4.446985] EXT4-fs (mmcblk1p8): recovery complete
  1095. [    4.448266] EXT4-fs (mmcblk1p8): mounted filesystem with ordered data mode. Opts: (null)
  1096. [    4.770830] cgroup: cgroup2: unknown option "nsdelegate"
  1097. [    4.784073] systemd[1]: systemd 245.4-4ubuntu4.0neotek01 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  1098. [    4.788105] systemd[1]: Detected architecture arm64.
  1099. [    4.801832] systemd[1]: Set hostname to <neotek>.
  1100. [    4.948999] systemd[1]: Configuration file /lib/systemd/system/npu-S11.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  1101. [    5.087914] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1102. [    5.088855] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  1103. [    5.089969] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  1104. [    5.092147] systemd[1]: Created slice system-modprobe.slice.
  1105. [    5.092937] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1106. [    5.094746] systemd[1]: Created slice system-serial\x2dgetty.slice.
  1107. [    5.095507] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1108. [    5.097230] systemd[1]: Created slice User and Session Slice.
  1109. [    5.097945] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1110. [    5.099262] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  1111. [    5.100273] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1112. [    5.101599] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1113. [    5.102616] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
  1114. [    5.104070] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1115. [    5.104898] systemd[1]: Reached target Local Encrypted Volumes.
  1116. [    5.105601] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1117. [    5.106850] systemd[1]: Reached target Remote File Systems.
  1118. [    5.107470] random: systemd: uninitialized urandom read (16 bytes read, 94 bits of entropy available)
  1119. [    5.108714] systemd[1]: Reached target Slices.
  1120. [    5.109220] random: systemd: uninitialized urandom read (16 bytes read, 95 bits of entropy available)
  1121. [    5.110391] systemd[1]: Reached target Swap.
  1122. [    5.110897] random: systemd: uninitialized urandom read (16 bytes read, 95 bits of entropy available)
  1123. [    5.112281] systemd[1]: Listening on Syslog Socket.
  1124. [    5.112956] systemd[1]: Listening on initctl Compatibility Named Pipe.
  1125. [    5.121497] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  1126. [    5.122640] systemd[1]: Listening on Journal Socket (/dev/log).
  1127. [    5.123640] systemd[1]: Listening on Journal Socket.
  1128. [    5.124591] systemd[1]: Listening on udev Control Socket.
  1129. [    5.125467] systemd[1]: Listening on udev Kernel Socket.
  1130. [    5.126555] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  1131. [    5.129623] systemd[1]: Mounting POSIX Message Queue File System...
  1132. [    5.133183] systemd[1]: Mounting Kernel Debug File System...
  1133. [    5.137474] systemd[1]: Mounting Kernel Trace File System...
  1134. [    5.143002] systemd[1]: Starting Journal Service...
  1135. [    5.148353] systemd[1]: Starting Set the console keyboard layout...
  1136. [    5.149498] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
  1137. [    5.151049] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
  1138. [    5.153802] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  1139. [    5.158649] systemd[1]: Starting Load Kernel Modules...
  1140. [    5.162643] systemd[1]: Starting Remount Root and Kernel File Systems...
  1141. [    5.167958] systemd[1]: Starting udev Coldplug all Devices...
  1142. [    5.174260] systemd[1]: Mounted POSIX Message Queue File System.
  1143. [    5.175547] systemd[1]: Mounted Kernel Debug File System.
  1144. [    5.176905] systemd[1]: Mounted Kernel Trace File System.
  1145. [    5.187941] systemd[1]: Finished Remount Root and Kernel File Systems.
  1146. [    5.196096] systemd[1]: Finished Load Kernel Modules.
  1147. [    5.200127] systemd[1]: Mounting FUSE Control File System...
  1148. [    5.201192] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
  1149. [    5.203018] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  1150. [    5.204152] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  1151. [    5.207428] systemd[1]: Starting Load/Save Random Seed...
  1152. [    5.211581] systemd[1]: Starting Apply Kernel Variables...
  1153. [    5.216835] systemd[1]: Starting Create System Users...
  1154. [    5.222300] systemd[1]: Mounted FUSE Control File System.
  1155. [    5.243738] systemd[1]: Finished Apply Kernel Variables.
  1156. [    5.246919] systemd[1]: Finished Create System Users.
  1157. [    5.249736] systemd[1]: Starting Create Static Device Nodes in /dev...
  1158. [    5.279948] systemd[1]: Finished Create Static Device Nodes in /dev.
  1159. [    5.282969] systemd[1]: Starting udev Kernel Device Manager...
  1160. [    5.284577] systemd[1]: Finished Set the console keyboard layout.
  1161. [    5.285361] systemd[1]: Reached target Local File Systems (Pre).
  1162. [    5.285697] systemd[1]: Reached target Local File Systems.
  1163. [    5.288868] systemd[1]: Starting Set console font and keymap...
  1164. [    5.289496] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  1165. [    5.309223] systemd[1]: Finished Set console font and keymap.
  1166. [    5.371113] systemd[1]: Started udev Kernel Device Manager.
  1167. [    5.381674] systemd[1]: Finished udev Coldplug all Devices.
  1168. [    5.477834] systemd[1]: Started Journal Service.
  1169. [    5.511588] systemd-journald[424]: Received client request to flush runtime journal.
  1170. [    5.520228] systemd-journald[424]: File /var/log/journal/152d075b18a8465080302ccb9cfe6776/system.journal corrupted or uncleanly shut down, renaming and replacing.
  1171. [    5.911486] failed to power up DHD generic adapter, 0 retry left
  1172. [    5.927669] wifi_platform_set_power = 0
  1173. [    5.927689] ======== PULL WL_REG_ON(-1) LOW! ========
  1174. [    5.927696] [WLAN_RFKILL]: rockchip_wifi_power: 0
  1175. [    5.927702] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
  1176. [    5.927709] wifi_platform_bus_enumerate device present 0
  1177. [    5.927715] ======== Card detection to remove SDIO card! ========
  1178. [    5.927722] sdio: host isn't  initialization successfully.
  1179. [    5.928217] failed to power up DHD generic adapter, max retry reached**
  1180. [    5.928269] unregister wifi platform drivers
  1181. [    5.928276] wifi_platform_bus_enumerate device present 0
  1182. [    5.928281] ======== Card detection to remove SDIO card! ========
  1183. [    5.928287] sdio: host isn't  initialization successfully.
  1184. [    5.928834] ======== dhd_wlan_deinit_plat_data ========
  1185. [    5.928845] dhd_module_init: Failed to load the driver, try cnt 0
  1186. [    5.928894] dhd_module_init: Failed to load driver max retry reached**
  1187. [    5.928900] dhd_module_init: Exit err=-19
  1188. [    6.027000] random: nonblocking pool is initialized
  1189. [    6.053686] IPVS: Creating netns size=2104 id=1
  1190. [    6.066196] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  1191. [    6.066273] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  1192. [    6.066288] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  1193. [    6.066313] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  1194. [    6.066335] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  1195. [    6.066458] reg-fixed-voltage vcc3v3-ngff: Looking up vin-supply from device tree
  1196. [    6.066485] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  1197. [    6.067469] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
  1198. [    6.068178] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
  1199. [    6.070735] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  1200. [    6.070750] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  1201. [    6.070787] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  1202. [    6.070936] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  1203. [    6.071020] reg-fixed-voltage vcc3v3-pcie: Looking up vin-supply from device tree
  1204. [    6.075187] rockchip-dwc3 usb1: failed to get drvdata dwc3
  1205. [    6.294555] IPVS: Creating netns size=2104 id=2
  1206. [    6.777503] tty_port_close_start: tty->count = 1 port count = 2.
  1207. [    6.937722] cfg80211: World regulatory domain updated:
  1208. [    6.937753] cfg80211:  DFS Master region: unset
  1209. [    6.937760] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  1210. [    6.937772] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  1211. [    6.937780] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  1212. [    6.937788] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  1213. [    6.937796] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  1214. [    6.937804] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  1215. [    6.937811] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  1216. [    6.937819] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  1217. [    6.937826] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  1218. [    8.074111] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Copy the code



tchip_askquestions

dmesg_44pro_0.zip

20.55 KB, Down times: 0
Author: neutionwei    Time: 2/13/2023 10:08
Can you provide the git log versions of uboot, kernel and device/rockchip?
Author: neutionwei    Time: 2/13/2023 10:14
In addition, the dts used by roc-rk3399-pc pro is not rk3399pro-*.dts
Author: Gustoff    Time: 2/18/2023 18:20
neutionwei Posted at 2/13/2023 10:08
Can you provide the git log versions of uboot, kernel and device/rockchip?

Thank you for reply!
U-boot:
  1. commit 908a4f8a976bcb7c13082d8e4293ca89ba47ebe4
  2. Author: huangjc <service@t-firefly.com>
  3. Date:   Tue Jul 14 14:43:53 2020 +0800

  5.     [kernel]: update in commit 0981eb26104d82381c9f85acbe77de23f2cedc38
Copy the code


Kernel:
  1. commit 892d398b3830c1e1b0560167f1896f38bd7e084a
  2. Author: huangjc <service@t-firefly.com>
  3. Date:   Mon Apr 25 14:13:56 2022 +0800
Copy the code


device/rockchip:
  1. commit 908a4f8a976bcb7c13082d8e4293ca89ba47ebe4
  2. Author: huangjc <service@t-firefly.com>
  3. Date:   Tue Jul 14 14:43:53 2020 +0800

  5.     [kernel]: update in commit 0981eb26104d82381c9f85acbe77de23f2cedc38
Copy the code
Author: Gustoff    Time: 2/18/2023 18:22
neutionwei Posted at 2/13/2023 10:14
In addition, the dts used by roc-rk3399-pc pro is not rk3399pro-*.dts

So, which dts I should use for ROC-RK3399-PC Pro board (like this https://en.t-firefly.com/product/industry/rocrk3399pcpro)?
Author: neutionwei    Time: 3/4/2023 10:00
The sdk you downloaded is wrong, please refer to the link below:
https://en.t-firefly.com/doc/download/127.html
https://wiki.t-firefly.com/en/RO ... ux_compile_gpt.html
Author: Ahmad.Rezaie    Time: 6/7/2023 14:20
Hi Guys.
I have similiar problem with SDK:
rk3399_linux_release_v2.5.1_20210301_firefly_split

and rootfs:
Ubuntu20.04-Lxqt_RK3399PRO_v2.40_20230330.img

WiFi Module not work.

I did the job exactly from this description:
https://wiki.t-firefly.com/en/RO ... pt.html#compile-sdk


Any Solution?






Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1