300-425熱門認證 & 300-425試題沒有人除外，我們Fast2test保證你100%的比例， 今天你選擇Fast2test，選擇你要開始的訓練，並通過你的下一次的考題，你將得到最好的資源與市場的相關性和可靠性保證。Fast2test Cisco的300-425考題和答案反映的問題問300-425考試。 最新的 CCNP Enterprise 300-425 免費考試真題 (Q257-Q262):問題 #257
An engineer is working for a manufacturing company that has a centralized deployment model.
Guests at headquarters need wireless access for presentations, demonstrations, and sharing of information. The engineer must provide external users with secure guest access by connecting to anchor controllers on the DMZ. Auto-Anchor Mobility has been selected in the mobility group to accomplish it. Both anchors are configured as part of the mobility group for HQ. Which design approach ensures that clients connect to the primary controller first and are pushed to the secondary if the primary fails?
A. Configure ECMP but weigh the cost to be higher to go to the primary.
B. Set the Anchor priority for the secondary controller to 1.
C. Set the Anchor priority for the primary controller to 1.
D. Configure ECMP but weigh the cost to be higher to go to the secondary.
答案：C
解題說明：
Setting the Anchor priority for the primary controller to 1 ensures that clients connect to the primary controller first. The Anchor priority is a value assigned to each controller within a mobility group to determine the order in which clients should connect to the controllers. A lower priority value has higher precedence. Therefore, by setting the primary controller's Anchor priority to 1, it becomes the preferred controller for client connections. If the primary controller fails, clients are then pushed to the secondary controller, which should have a higher Anchor priority value.
問題 #258
Which Cisco WLC feature allows grouping of APs into a logical set for RF management?
A. RF Profiles
B. FlexConnect Groups
C. Mobility Groups
D. AP Groups
答案：D
問題 #259
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
A. ping
B. rping
C. mping
D. eping
答案：A
解題說明：
問題 #260
A network engineer is designing a new wireless network. The network needs to have these characteristics:
* support high client concentration
* optimize client performance
* avoid interference
Which approach should be taken?
A. Deploy APs near each other for 2 4 GHz coverage, and disable the 5 GHz radios for some APs
B. Deploy APs near each other for 5 GHz coverage, and disable the 2 4 GHz radios for some APs
C. Deploy APs near each other for 5 GHz coverage, and enable me 2.4 GHz radios for all APs.
D. Deploy APs near each other for 2 4 GHz coverage and disable the 5 GHz radios for all APs
問題 #261
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?
