Firefly Open Source Community

Title: Install New Image on RK3566 failure [Print This Page]

Author: TopherWest Time: 6/25/2023 11:24
Title: Install New Image on RK3566 failure
Hi,

I have an RK3566 and am struggling to install a new firmware image. I have taken the following steps:

1) Within RK Devtool i have burned the norflash2emmc loader successfully

2) From upgrade firmware tab I have upgraded with this firmware https://github.com/radxa/rock-3- ... 113_0127-gpt.img.gz

ALl loaded successfully however the only thing on my screen when connected is the firefly logo and there has been no IP assigned so I cannot SSH in even with ETH connected

I have tried the above with images both from Radxa directly as well as the Firefly images for Core3566JD4, ROC-RK3566-PC and AIO3566JD4but cannot get past the firefly logo. What am I doing wrong?

Author: Firefly Time: 6/26/2023 09:43
Hello, which Firefly images are you using?

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)