Firefly Open Source Community

Title: ISO-45001-Lead-Auditor Lerntipps, ISO-45001-Lead-Auditor Demotesten [Print This Page]
Author: johnfos843    Time: before yesterday 18:11
Title: ISO-45001-Lead-Auditor Lerntipps, ISO-45001-Lead-Auditor Demotesten
Laden Sie die neuesten ZertSoft ISO-45001-Lead-Auditor PDF-Versionen von Pr¨¹fungsfragen kostenlos von Google Drive herunter: https://drive.google.com/open?id=18auVSA8hzZCcC4zwwL1rCBrMjhDI6z8_
Nun ist eine Gesellschaft, die mit den fähigen Leuten ¨¹berschwemmt. Aber viele Fachleute fehlen trotzdem doch. Beispielsweise fehlen in der IT-Branche Techniker. Und die PECB ISO-45001-Lead-Auditor Zertifizierungspr¨¹fung sit eine Pr¨¹fung, die IT-Technik testet. ZertSoft ist eine Website, die Ihnen Kenntnise zur PECB ISO-45001-Lead-Auditor Zertifizierungspr¨¹fung liefert.
Die IT-Kandidaten sind meistens Beschäftigte. Deshalb haben viele nicht gen¨¹gende Zeit, sich auf die PECB ISO-45001-Lead-Auditor Pr¨¹fung vorzubereiten. Aber sie verwenden viel Zeit auf die Schulungskurse. Am wichtigsten haben Kandidaten viele wertvolle Zeit verschwendet. Hier empfenlen wir Ihnen eine gute Website f¨¹r die Lernmaterialien. Teil der Pr¨¹fungsfragen und Antworten im Internet ist kostenlos. Was wichtig ist, dass die realen Simulations¨¹bungen Ihnen zum Bestehen der PECB ISO-45001-Lead-Auditor Zertifizierungspr¨¹fung verhelfen können. Die Schulungsunterlagen zur PECB ISO-45001-Lead-Auditor Zertifizierungspr¨¹fung von ZertSoft können Ihnen nicht nur Ihre Zeitkosten ersparen , sondern Ihnen helfen, die Pr¨¹fung erfolgreich zu bestehen. So haben Sie keine Gr¨¹nde, ZertSoft nicht zu wählen.
>> ISO-45001-Lead-Auditor Lerntipps <<
ISO-45001-Lead-Auditor Demotesten & ISO-45001-Lead-Auditor AusbildungsressourcenUm die PECB ISO-45001-Lead-Auditor Zertifizierungspr¨¹fung zu bestehen, ist es notwendig, geeignete Pr¨¹fungsmaterialien zu wählen. Unser ZertSoft bietet Ihnen die effiziente Materialien zur PECB ISO-45001-Lead-Auditor Zertifizierungspr¨¹fung. Die IT-Experten von ZertSoft sind alle erfahrungsreich. Die von ihnen erforschten Materialien sind den realen Pr¨¹fungsthemen fast gleich. ZertSoft ist eine Website, die den Kandidaten Bequemlichkeiten zur Zertifizierungspr¨¹fung bietet und Ihnen helfen, die PECB ISO-45001-Lead-Auditor Pr¨¹fung zu bestehen.
PECB ISO-45001-Lead-Auditor Pr¨¹fungsplan:
ThemaEinzelheiten
Thema 1
  • Closing an ISO 45001 audit: This section of the exam measures the skills of Audit Consultants and covers the procedures for concluding an ISO 45001 audit. It emphasizes reporting results, discussing findings with stakeholders, and ensuring follow-up actions are planned.
Thema 2
  • Conducting an ISO 45001 audit: This section of the exam measures the skills of Lead Auditors and covers the execution of an ISO 45001 audit. It focuses on gathering evidence, interviewing personnel, and assessing compliance with OHSMS requirements during the audit process.
Thema 3
  • Managing an ISO 45001 audit program: This section of the exam measures the skills of Audit Managers and covers the management of an ongoing ISO 45001 audit program. It focuses on scheduling audits, maintaining auditor competency, and ensuring continuous improvement within the auditing process. One skill to be measured is implementing strategies for effective audit program management.
Thema 4
  • ISO 45001 requirements for an OH&S MS ¨C Clauses 4 to 10: This section of the exam measures the skills of Auditors related to specific requirements outlined in ISO 45001 about occupational health and safety management systems. It emphasizes understanding clauses that address context, leadership, planning, support, operation, performance evaluation, and improvement. A skill to be measured is applying ISO 45001 requirements to organizational practices.

PECB Certified ISO 45001 Lead Auditor Exam ISO-45001-Lead-Auditor Pr¨¹fungsfragen mit Lösungen (Q71-Q76):71. Frage
Which two of the following are examples of audit objectives for the audit team?
Antwort: B,D
Begr¨¹ndung:
Audit objectives for the audit team focus on ensuring the audit process is executed effectively, efficiently, and without causing undue disruption to the organization being audited. ISO 19011:2018 provides guidance on setting audit objectives.
Analysis of Options:
* A. To reduce instances of injury and ill health:Incorrect. This is an objective of the OH&S management system, not of the audit itself.
* B. To minimise risk resulting from the audit process:Correct. ISO 19011 emphasizes managing risks to the auditee and the audit process during audits (Clause 5.4).
* C. To improve overall health and safety performance:Incorrect. Improving health and safety performance is an outcome of the OH&S management system, not the audit team's objective.
* D. To complete the audit on time:Correct. Ensuring timely completion of the audit aligns with effective audit management.
* E. To implement any necessary corrective action:Incorrect. Implementing corrective actions is the auditee's responsibility, not the audit team's.
References:
ISO 45001:2018:
Clause 5.4: Worker consultation and participation.
Clause 6.2: OH&S objectives and planning.
Clause 8.1.2: Hierarchy of controls and worker involvement.
ISO 19011:2018: Guidelines for auditing management systems.

72. Frage
Which two of the following phrases would apply to "plan" in relation to the Plan-Do-Check-Act cycle for a business process?
Antwort: A,E

73. Frage
Showitoff is an organisation spcialising in the design and production of wall decorating material for the domestic market. During an ISO 45001 certification audit of the site, the auditor comes across an open, walled area just outside the maintenance department. It contains various scraps of wood and metal as well as several rusty components. Several heavy concrete beams are learning against a thin brick wall in which cracks are visible. When asked about it, the OHS Manager states that he presume that the material come from maintenance work, so it is the Maintenance Manager's responsibility.
The auditor interviews the Maintenance Manager in his department. He asks about the area outside and is told that it contains some excess materials that the Manager likes to keep in case they come in handy at some stage. The auditor points out that the wall appears to be unstable collapse at any moment. The Maintenance Manager is not aware of such a situation.
Which three statement represent good audit practice?
Antwort: B,D,G
Begr¨¹ndung:
Comprehensive Detailed Explanation along with All ISO 45001 Audit References Clause 6.1.2 of ISO 45001:2018 emphasizes the identification of hazards and assessment of risks, and Clause
5.4 highlights the importance of consultation and communication among roles. The auditor's role includes verifying conformity to these clauses through evidence gathering and observation.
Analysis of Options:
* A. The auditor should advise the organization to get rid of the walled area.This is outside the scope of an auditor's role, which is to observe and report findings, not to dictate specific actions.
* B. The auditor should ask the Maintenance Manager to conduct a safety survey.While safety surveys are useful, asking the Maintenance Manager to conduct one is not the auditor's responsibility.
* C. The auditor should check the lines of communication between the OHS Manager and Maintenance Manager.This aligns with ISO 45001:2018, Clause 5.4, as communication gaps may have contributed to the situation.
* D. The auditor should check whether the organization has identified the safety hazards associated with the walled area.Clause 6.1.2 requires hazard identification. The auditor must determine whether this has been done.
* E. The auditor should consider surveying more areas of the site for other potentially unsafe situations.Broadening the audit scope to identify additional risks is a good practice in line with Clause
9.2.2.
* F. The auditor should demand that the Maintenance Manager deals with the wall.Demanding action is not within the auditor's authority. The auditor should raise findings instead.
* G. The auditor should raise a nonconformity against ISO 45001.While this may be appropriate depending on evidence, raising a nonconformity is not a replacement for good audit practices.
* H. The auditor should refer the organization to health and safety authorities.This step is extreme and should only occur if there is an imminent danger and no action is being taken.
ISO References:
* Clause 6.1.2: Hazard identification and risk assessment.
* Clause 5.4: Worker consultation and participation.
* Clause 9.2.2: Internal audit program and execution.

74. Frage
ISO 45001 requires the organisation to retain OHSMS documented information. From the following list of documented information, which four examples must be retained by the organisation?
Antwort: A,B,C,D
Begr¨¹ndung:
Analysis of Options:
* A. Results of management review:Correct. Clause 9.3 requires retention of management review results as documented information.
* B. Risks and opportunities:Incorrect. Risks and opportunities must be considered and managed, but retaining this as documented information is not mandatory.
* C. Results of compliance evaluation:Correct. Clause 9.1.2 requires retention of compliance evaluation results.
* D. Workers' current level of competency:Incorrect. Competency must be ensured, but retaining specific competency records is not explicitly required.
* E. Assigned responsibilities and authorities:Incorrect. These must be defined and communicated but are not required to be retained as documented information.
* F. The relevant requirements of workers:Incorrect. Relevant worker requirements must be considered but not retained as documented information.
* G. Effectiveness of corrective actions:Correct. Clause 10.2 requires retention of evidence of corrective actions taken.
* H. OH&S Policy:Correct. Clause 5.2 requires the OH&S policy to be maintained as documented information.
ISO References:
* Clause 5.2: OH&S policy.
* Clause 9.1.2: Compliance evaluation.
* Clause 9.3: Management review.
* Clause 10.2: Corrective actions.

75. Frage
An audit team leader arrives at a steel fabrication organisation that manufactures stairways to carry out a Stage2 certification audit. At a meeting with the OHSMS Manager, she is told that they have won their biggest contact from a construction organization to manufacture and install stairways.
During the audit, a team member found that several employees had suffered hand injuries over several months due to handrail welds not being property polished. The OHSMS Manager blames the new employees they had to take on because of the big contract. The auditor raises a nonconformance against clause 10.2 erf ISO 45001.
In relation to the nonconformity raised by the auditor and in line with the policy of the certification body, the audit team raise improvement opportunities in the audit report.
Which three of the options would represent acceptance opportunities for improvement in the report?
Antwort: C,F,H
Begr¨¹ndung:
Comprehensive Detailed Explanation along with All ISO 45001 Audit References Opportunities for improvement (OFIs) are suggestions provided during audits that do not indicate nonconformities but are aimed at enhancing the system's performance.
Analysis of Options:
* A. A quality control program could involve non-destructive testing of the welded handrails:While beneficial, this focuses on product quality rather than OH&S improvements.
* B. Operational planning activities may benefit from an improved risk-based approach based on international standards for risk management:Correct. Enhancing risk-based thinking aligns with Clause 6.1.1.
* C. A first aid station could be located next to the handrail polishing operation:While useful, first aid station placement is an operational matter, not directly related to OH&S management system improvement.
* D. Additional internal audits of the OHS management system may reduce production problems:
Internal audits should address system performance, not production problems.
* F. The induction program for new employees could include an awareness training video on health and safety:Correct. Enhanced training for new employees addresses Clause 7.2 (competence).
* G. The requirement for wearing protective gloves could be extended to shop floor workers across all operations:Correct. This improves hazard control in line with Clause 8.1.2.
* H. The molding polishers should be disciplined for incompetencyisciplinary actions are outside the scope of system improvement.
ISO References:
* Clause 6.1.1: Risk management.
* Clause 7.2: Competence.
* Clause 8.1.2: Hierarchy of controls.

76. Frage
......
Die PECB ISO-45001-Lead-Auditor Fragenkataloge von ZertSoft werden von den IT-Experten konzipiert. Sein Design ist eng mit dem heutigen schnell verändernden IT-Markt verbunden. Die Ausbildung von ZertSoft wird Ihnen helfen, mit der erneuerten Technik Ihre Fähigkeit zur Problemlösung zu fördern und Ihre Zufriedenheit am Arbeitsplatz zu verbessern. Die Deckung der PECB ISO-45001-Lead-Auditor Zertifizierung von ZertSoft ist um 100% als geplant gestiegen. Solange Sie unsere Pr¨¹fungsfragen und Antworten verwenden, garantieren wir Ihnen, dass Sie zum ersten Mal die PECB ISO-45001-Lead-Auditor Pr¨¹fung m¨¹hlos bestehen können.
ISO-45001-Lead-Auditor Demotesten: https://www.zertsoft.com/ISO-45001-Lead-Auditor-pruefungsfragen.html
P.S. Kostenlose und neue ISO-45001-Lead-Auditor Pr¨¹fungsfragen sind auf Google Drive freigegeben von ZertSoft verf¨¹gbar: https://drive.google.com/open?id=18auVSA8hzZCcC4zwwL1rCBrMjhDI6z8_




Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1