Firefly Open Source Community

Title: Display LCD which with double LVDS interface type [Print This Page]

Author: Developer_X Time: 12/4/2014 14:20
Title: Display LCD which with double LVDS interface type

Finally got the engineer model of RK3288, feeling nice at the first sight. Because the development board leaves interfaces only for LCD data cable, I have added a interface board to support dual LVDS output.

As LVDS requires complete reference surface with strict layout, the length error between signal traces in a pair must be less than 30mil and the length error between signal pairs must be less than 100mil. What’s more, the corners should adopt arc or obtuse angel and the impedance requires Z=100ohm±10ohm.

With a little help from Firefly team, I managed to figure out the excellent layout. Here’s the outcome. It is a 10.1 inch screen with 1200*1920 dpi.

[size=0.83em]

Author: Developer_X Time: 12/5/2014 17:04
Uploader rk3288_display_v11.pdf

Author: Wolf Time: 1/11/2016 23:09
Hi Developer_X,

Could you give more details how you connected two LVDS LCDs to Firefly? Is it in this PDF document from your second post? If so, then I can't download it.

Regards
Wolf

Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)