Title: F5 F5CAB1 Dumps | Questions (2026) [Print This Page] Author: paulfor669 Time: 11 hour before Title: F5 F5CAB1 Dumps | Questions (2026) If you buy the DumpStillValid's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. If the official change the outline of the certification exam, we will notify customers immediately. If we have any updated version of test software, it will be immediately pushed to customers. DumpStillValid can promise to help you succeed to pass your first F5 Certification F5CAB1 Exam.
Perhaps you still feel confused about our BIG-IP Administration Install, Initial Configuration, and Upgrade test questions when you browse our webpage. There must be many details about our products you would like to know. Do not hesitate and send us an email. Gradually, the report will be better as you spend more time on our F5CAB1 Exam Questions. As you can see, our system is so powerful and intelligent. What most important it that all knowledge has been simplified by our experts to meet all people¡¯s demands. All of our assistance is free of charge. We are happy that our small assistance can change you a lot. You don¡¯t need to feel burdened. Remember to contact us!
Exam F5CAB1 Format & Reliable F5CAB1 Test CampPassing the F5CAB1 exam certification will be easy and fast, if you have the right resources at your fingertips. As the advanced and reliable website, DumpStillValid will offer you the best study material and help you 100% pass. F5CAB1 online test engine can simulate the actual test, which will help you familiar with the environment of the F5CAB1 real test. The F5CAB1 self-assessment features can bring you some convenience. The 24/7 customer service will be waiting for you, if you have any questions. F5 BIG-IP Administration Install, Initial Configuration, and Upgrade Sample Questions (Q44-Q49):NEW QUESTION # 44
Refer to the exhibit.
What traffic will be permitted to reach the BIG-IP?
A. Telnet
B. FTP
C. SSH
Answer: C
Explanation:
The exhibit shows the configuration of aSelf IPwith:
* Port Lockdown: Allow Custom
* ACustom Listthat includes the following TCP ports:
* 443
* 22
Meaning of these ports:
* TCP 443# HTTPS (TMUI - web-based management)
* TCP 22# SSH (command-line remote access)
No other TCP, UDP, or protocol entries are listed; therefore, only these two services are allowed to reach the BIG-IP via this Self IP.
Evaluating the answer choices:
Option
Service
Port
Allowed?
FTP
TCP 21
Not listed
Not allowed
SSH
TCP 22
Listed
Allowed
Telnet
TCP 23
Not listed
Not allowed
Thus,SSHis the only traffic permitted through this Self IP configuration.
NEW QUESTION # 45
When using the tmsh shell of a BIG-IP system, which command will display the management-ip address?
A. list /sys management-ip
B. show /sys management-ip
C. run /util bash ifconfig mgmt
Answer: A
Explanation:
Comprehensive and Detailed Explanation (Paraphrased from F5 BIG-IP Administration / Installation / Initial Configuration concepts) Within the BIG-IP Traffic Management Shell (tmsh), system configuration objects-including the management IP-are organized under the/syshierarchy. The management IP address is a configurable property stored in the system configuration and can be viewed using the tmshlistcommand, which displays configuration objects and their currently assigned values.
Why "list /sys management-ip" is correct
* The list command in tmsh is used todisplay configured system values, not runtime statistics.
* The object that holds the management IP settings on BIG-IP systems is located at:/sys management-ip
* Running the command:list /sys management-ipwill reveal the settings for the management IP interface, including the address, netmask, and any associated attributes.
* This is the standard method used during system setup and verification to confirm the management IP configuration.
This behavior aligns with BIG-IP administration procedures, where configuration information is retrieved usinglist, while operational data is retrieved usingshow.
Why the other options are incorrect
A). run /util bash ifconfig mgmt
* This command enters the Bash shell, then runs ifconfig to display the management interface.
* While this can show the management interface address, it isnot a tmsh-native command, and the question specifically asks for a tmsh command.
* Administrators use tmsh directly for configuration display rather than leaving the shell.
C). show /sys management-ip
* The show command displaysstatistics or operational data, not configuration values.
* The management-ip object does not maintain statistics; therefore show does not return the configuration details required.
* Only thelistcommand reveals stored configuration data such as IP address and netmask.
NEW QUESTION # 46
What will setting a Self IP to"Allow None"for Port Lockdown do?
A. Block HA communications, causing the systems to report their peer as online ready.
B. Default allow port 1026 access between peer devices and traffic processing across the network failover.
C. Block HA communications, causing the systems to report their peer as offline and go active-active.
Answer: C
Explanation:
ThePort Lockdownfeature controls which services a Self-IP will respond to.
Setting a Self-IP toAllow Nonemeans:
* The Self-IP will not acceptanytraffic except the very limited, hard-coded HA ports such asTCP 4353 used for device trust and configuration sync.
* All other HA ports, including those needed for network failover and other HA mechanisms,are blocked.
When essential HA services cannot communicate, each device assumes its peer is down.
This results in:
* HA failover misbehavior
* Both devices thinking the other is offline
* Potentialactive-active condition, which is not intended and can cause traffic disruption Thus,Allow Nonecan break HA functionality unless the Self-IP is not used for HA links.
NEW QUESTION # 47
Which two items demonstrate thecreation of a new volumefor software images?
(Choose two.)
A. Using the GUI, go toSystem > Disk Management, selectNew Volume. In the pop-up window, type the name or number of the new volume and clickApply.
B. tmsh install software image /shared/images/BIGIP-<version>.iso volume HD1.5 create-volume
C. tmsh install /sys software image BIGIP-<version>.iso volume HD1.5 create-volume
D. tmsh install sys software image /shared/images/BIGIP-<version>.iso volume HD1.5 create-volume
E. Using the GUI, go toSystem > Software Management > Available Images > Install, and in the Install Software Image pop-up window, type the new volume name or number and clickInstall.
Answer: A,B
Explanation:
In BIG-IP, software images are installed onboot volumes(for example, HD1.1, HD1.2, HD1.3, etc.).
To install software on anew volume, the administrator must instruct the system to create a new boot location before installation.
There are two correct ways to create a new volume:
A). tmsh command (with correct syntax)
tmsh install software image /shared/images/BIGIP-<version>.iso volume HD1.5 create-volume This syntax correctly includes:
* install software image
* full path to ISO (/shared/images/...)
* volume name (HD1.5)
* create-volumekeyword
This instructs BIG-IP to create the new boot volume as part of the installation.
C). Using the GUI # System > Disk Management
From the Disk Management menu, the administrator can:
* Select "New Volume"
* Enter the volume identifier (e.g., HD1.5)
* Apply changes
This GUI method is officially supported and explicitly creates a new boot volume before installing the software.
Why the other options are incorrect:
B). Incorrect tmsh syntax
* Missing /shared/images/ path
* Incorrect command structure
D). Incorrect command structure
* Missing required keywords and correct command hierarchy
E). Software Management # Install does NOT create volumes
* This installs to anexistingvolume only
* The GUI install dialog does not create new boot volumes
Thus, onlyOption AandOption Cproperly create a new software volume.
NEW QUESTION # 48
The BIG-IP Administrator received a ticket that an authorized user is attempting to connect to the Configuration Utility from a jump host and is being denied.
The HTTPD allow list is configured as:
sys httpd {
allow { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }
}
The jump host IP is172.28.32.22.
What command should the BIG-IP Administrator use to allow HTTPD access for this jump host?
A. modify /sys httpd allow add { 172.28.32.22 }
B. modify /sys httpd allow replace-all-with { 172.28.32.22 }
C. modify /sys httpd allow delete { 172.28.31.0/255.255.255.0 172.28.65.0/255.255.255.0 }
Answer: A
Explanation:
The HTTPD allow list controls which IP addresses or subnets may access the Configuration Utility (TMUI) on the BIG-IP system. The Administrator already has two subnets allowed and needs to add asingle host IPto the existing list.
* The object/sys httpd allowsupports actions such asadd,delete, andreplace-all-with.
* Because the goal is toaddone more entry without removing the existing permitted subnets, the correct command is:
modify /sys httpd allow add { 172.28.32.22 }
This appends the new host to the existing list while preserving the previously configured networks.
Why the other options are incorrect:
* Option A (replace-all-with)wouldoverwritethe entire allow list, removing existing permitted subnets- unacceptable.
* Option B (delete)wouldremovethe existing networks and not add the required host.
Therefore, the correct administrative action is toaddthe jump host's IP.
NEW QUESTION # 49
......
DumpStillValid's pledge to customers is that we can help customers 100% pass their IT certification exams. The quality of DumpStillValid's product has been recognized by many IT experts. The most important characteristic of our products is their pertinence. It only takes 20 hours for you to complete the training course and then easily pass your first time to attend F5 Certification F5CAB1 Exam. You will not regret to choose DumpStillValid, because choosing it represents the success. Exam F5CAB1 Format: https://www.dumpstillvalid.com/F5CAB1-prep4sure-review.html
We not only offer the best, valid and professional exam questions and answers but also the golden customer service that can satisfy you 100%, no matter you have any questions about real exam or F5CAB1 exam questions and answers, we will solve with you as soon as possible, What's more, the questions & answers from F5CAB1 latest dumps are compiled by the IT experts who has decades of hands-on experience, so the validity and reliability of the F5CAB1 free study material really deserve to be relied on, F5 F5CAB1 Exam Reference The system will then generate a report based on the user's completion results, and a report can clearly understand what the user is good at.
In Windows, you have My Computer same as on the Folders panel) My Documents, F5CAB1 and My Pictures, Use this option to specify the minimum amount of space between the first footnote in a column and the bottom of the text in the column. Reliable 100% Free F5CAB1 ¨C 100% Free Exam Reference | Exam F5CAB1 FormatWe not only offer the best, valid and professional Reliable F5CAB1 Test Camp exam questions and answers but also the golden customer service that can satisfy you 100%, no matter you have any questions about real exam or F5CAB1 Exam Questions And Answers, we will solve with you as soon as possible.
What's more, the questions & answers from F5CAB1 latest dumps are compiled by the IT experts who has decades of hands-on experience, so the validity and reliability of the F5CAB1 free study material really deserve to be relied on.
The system will then generate a report based on the user's completion results, and a report can clearly understand what the user is good at, F5CAB1 Certification is a stepping-stone to success no matter whether you have work experience.
We provide 100% money back guarantee for all of us F5CAB1 test questions products, and we are always available to provide you top notch support and new F5CAB1 questions.
ractice F5CAB1 Mock[/url]