Title: NSE6_SDW_AD-7.6 Pr¨¹fungs¨¹bungen & NSE6_SDW_AD-7.6 Praxispr¨¹fung [Print This Page] Author: johnsmi426 Time: yesterday 23:23 Title: NSE6_SDW_AD-7.6 Pr¨¹fungs¨¹bungen & NSE6_SDW_AD-7.6 Praxispr¨¹fung Durch die Fortinet NSE6_SDW_AD-7.6 Zertifizierungspr¨¹fung werden Ihre Berufsaussichten sicher verbessert werden. Denn die Fortinet NSE6_SDW_AD-7.6 Zertifizierungspr¨¹fung ist eine sehr beliebte IT-Pr¨¹fung. Wenn Sie die Pr¨¹fung bestehen, heißt das eben, dass Sie gute Fachkenntnisse und Fähigkeiten besitzen und geeignet f¨¹r die Arbeit sind.
Um der Anforderung des aktuellen realen Test gerecht zu werden, aktualisiert das Technik-Team von Fast2test rechtzeitig die Fragen und Antworten zur Fortinet NSE6_SDW_AD-7.6 Zertifizierungspr¨¹fung. Wir akzeptieren immer R¨¹ckmeldungen von Benutzern und nehmen viele ihre Vorschläge an, was zu einer perfekten Schulungsmaterialien zur Fortinet NSE6_SDW_AD-7.6 Pr¨¹fung macht. Dies ermöglicht Fast2test, immer Produkte von bester Qualität zu besitzen.
NSE6_SDW_AD-7.6 Schulungsangebot, NSE6_SDW_AD-7.6 Testing Engine, Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator TrainingsunterlagenIn unserem Fast2test gibt es viele IT-Fachleute, die Fortinet NSE6_SDW_AD-7.6 Zertifizierungsantworten bearbeiten, deren Hit-Rate 100% beträgt. Ohne Zweifel gibt es auch viele ähnliche Websites, die Ihnen vielleicht auch Lernhilfe und Online-Service bieten. Aber wir sind ihnen in vielen Aspekten voraus. Die Gr¨¹nde daf¨¹r liegen darin, dass wir Fortinet NSE6_SDW_AD-7.6 Pr¨¹fungsfragen und Antworten mit hoher Hit-Rate bieten, die sich regelmäßig aktualisieren. So können die an der Fortinet NSE6_SDW_AD-7.6 Zertifizierungspr¨¹fung teilnehmenden Pr¨¹flinge unbesorgt bestehen. Wir, Fast2test, versprechen Ihnen, dass Sie die Fortinet NSE6_SDW_AD-7.6 ZertifizierungsPr¨¹fung 100% bestehen können. Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator NSE6_SDW_AD-7.6 Pr¨¹fungsfragen mit Lösungen (Q17-Q22):17. Frage
(As an IT manager, you want to delegate the installation and management of your SD-WAN deployment to a managed security service provider (MSSP). Each site must maintain direct internet access and be secure. You expect significant traffic flow between the sites and want to delegate as much of the network administration and management as possible to the MSSP.
Which two MSSP deployment blueprints address your requirements? Choose two answers.)
A. Use a shared hub on the MSSP premises and a dedicated hub on the customer premises, and install the spokes on the customer premises.
B. Install the hub and spokes on the customer premises, and enable the MSSP to manage the SD-WAN deployment using FortiManager with a dedicated ADOM.
C. Install a dedicated hub on the MSSP premises for the customer, and install the spokes on the customer premises.
D. Use a shared hub on the MSSP premises with a dedicated VDOM for the customer, and install the spokes on the customer premises.
Antwort: C,D
Begr¨¹ndung:
Your requirements map to two key MSSP goals described in the FCSS SD-WAN 7.6 blueprint patterns:
* Delegate as much administration and management as possible to the MSSPThis is best achieved when the hub security and SD-WAN control point is located on the MSSP premises, because the MSSP can centrally operate the core enforcement and overlay control. Both option B (dedicated hub at MSSP) and option D (shared hub at MSSP with customer isolation) meet this requirement.
* Each site must maintain direct internet access (DIA) and be secure, with significant site-to-site trafficIn Fortinet SD-WAN MSSP designs, spokes can still use local breakout for DIA while also building secure overlays for inter-site traffic. Placing the hub at the MSSP enables centralized security services and scalable inter-site connectivity management while preserving DIA where required. Options B and D support this operating model.
Why the other options do not best match:
* A includes a dedicated hub on the customer premises, which reduces how much the MSSP can centralize and operate from its own environment, so it does not maximize delegation.
* C places both hub and spokes on the customer premises. While the MSSP can manage using a dedicated ADOM, this blueprint does not align as strongly with "delegate installation and management" to the MSSP as the designs where the hub is hosted and operated from the MSSP premises.
Therefore, the two MSSP deployment blueprints that address your requirements are B and D.
18. Frage
Refer to the exhibit.
What conclusions can you draw about the traffic received by FortiGate originating from the source LAN device 10.0.1.133 and destined for the company's SMTP mail server at 10.66.0.125?
A. FortiGate steers the traffic from the LAN device 10.0.1.133 to the company SMTP mail server 10.66
0.125 through port3.
B. ForliGate steers the traffic from the LAN device 10.0.1.133 to the company SMTP mail server
10.66.0.125 through port2.
C. FortiGate steers the traffic from the LAN device 10.0.1.133 to the SMTP mail server 10.66.0.125 through the SD-WAN member ID 1 or 2.
D. FortiGate steers the traffic from the LAN device 10.0.1.133 to the company SMTP mail server
10.66.0.125 through the SD-WAN member ID 4.
Antwort: C
Begr¨¹ndung:
The policy-route output shows the matching SD-WAN service for destination 10.66.0.0/24 is vwl_service=4 (LAN-to-Corp2) with vwl_mbr_seq=1 2 and paths oif=3(port1) and oif=4(port2). Therefore, traffic from
10.0.1.133 to 10.66.0.125 is steered via SD-WAN member ID 1 or 2.
19. Frage
As an IT manager for a healthcare company, you want to delegate the installation and management of your SD-WAN deployment to a managed security service provider (MSSP). Each site must maintain direct internet access and ensure that it is secure. You expected significant traffic flow between the sites and want to delegate as much of the network administration and management as possible to the MSSP.
Which two MSSP deployment blueprints best address the customer's requirements? (Choose two.)
A. Use a shared hub at the MSSP premises and a dedicated hub at the customer premises and install the spokes at the customer premises.
B. Install the hub and spokes at the customer premises and enable the MSSP to manage the SD-WAN deployment using FortiManager with a dedicated ADOM.
C. Install a dedicated hub at the MSSP premises for the new customer, and install the spokes at the customer premises.
D. Use a shared hub at the MSSP premises with a dedicated VDOM for the new customer, and install the spokes at the customer premises.
Antwort: C,D
Begr¨¹ndung:
Hosting the hub at the MSSP centralizes installation, security, and ongoing management while each site (spoke) keeps local DIA. This can be done multi-tenant with a shared hub using a dedicated VDOM or with a fully dedicated hub per customer for stricter isolation and control, both meeting the requirement to delegate administration to the MSSP and support high inter-site traffic.
20. Frage
Refer to the exhibits.
The exhibits show the source NAT (SNAT) global setting. port2 interface settings, and the routing table on FortiGate.
The administrator increases the member priority on port2 to 20.
Upon configuration changes and the receipt of new packets, which two actions does FortiGate perform on existing sessions established over port2? (Choose two.)
A. FortiGate flags the sessions as dirty.
B. FortiGate updates the gateway information of the sessions with SNAT so that they use port1 instead of port2.
C. FortiGate flags the SNAT session as dirty only if the administrator has assigned an IP pool to the firewall policies with NAT.
D. FortiGate continues routing all existing sessions over port2.
E. FortiGate routes only new sessions over port2.
Antwort: A,B
Begr¨¹ndung:
When the member priority of a port is increased (e.g., port2 to 20), FortiGate evaluates existing sessions and applies "dirty" flags where applicable. The SD-WAN session management mechanism is described in detail:
"Upon a change in SD-WAN member priority, all existing sessions using that member are marked as dirty.
For SNAT sessions, the gateway information is updated to ensure future packets are routed through the newly preferred member, in this case, port1. This automatic re-evaluation allows SD-WAN to dynamically respond to topology or priority changes, maintaining optimal routing." This is fundamental to seamless failover and session persistence in Fortinet SD-WAN, ensuring active flows are redirected based on updated priorities or health status.
References:
[FCSS_SDW_AR-7.4 1-0.docx Q13]
FortiOS 7.4 SD-WAN Concept Guide, "Session Management During Path Change" FortiGate CLI Reference: diagnose sys session list
21. Frage
The SD-WAN overlay template helps to prepare SD-WAN deployments. To complete the tasks performed by the SD-WAN overlay template, the administrator must perform some post-run tasks. What are two mandatory post-run tasks that must be performed? (Choose two.)
A. Assign an sdwan_id metadata variable to each device (branch and hub)
B. Create policy packages and assign them to the branch devices.
C. Configure routing through the overlay tunnels created by the SD-WAN overlay template.
D. Assign a hub id metadata variable to each hub device.
E. Configure SD-WAN rules
Antwort: B,E
Begr¨¹ndung:
After using the SD-WAN overlay template, two mandatory post-run tasks remain:
"First, administrators must create and assign policy packages to branch devices, as security and access policies are not included in overlay templates. Second, SD-WAN rules must be configured so that traffic can be matched and steered appropriately through the established overlays. Neglecting either task results in ungoverned traffic or inefficient routing, undermining the benefits of SD-WAN." Templates automate topology, but policy and rule definition are critical for operational effectiveness.
References:
[FCSS_SDW_AR-7.4 1-0.docx Q25]
Fortinet SD-WAN Reference Architecture 7.4, "Post-Deployment Tasks for SD-WAN Overlay Templates"
22. Frage
......
Fortinet NSE6_SDW_AD-7.6 dumps von Fast2test sind die unentbehrliche Pr¨¹fungsunterlagen, mit denen Sie sich auf Fortinet NSE6_SDW_AD-7.6 Zertifizierung vorbereiten. Der Wert dieser Unterlagen ist gleich wie die anderen Nachschlagsb¨¹cher. Diese Meinung ist nicht ¨¹bertrieben. Wenn Sie diese Schulungsunterlagen zur Fortinet NSE6_SDW_AD-7.6 Zertifizierung benutzen, finden Sie es wirklich. NSE6_SDW_AD-7.6 Praxispr¨¹fung: https://de.fast2test.com/NSE6_SDW_AD-7.6-premium-file.html
Fast2test versprechen, dass wir keine M¨¹he scheuen, um Ihnen zu helfen, die Fortinet NSE6_SDW_AD-7.6 Zertifizierungspr¨¹fung zu bestehen, Jeder Käufer kann den nahen und warmen Kundenservice ¨¹ber das ganze Jahr genießen, wenn er unseren NSE6_SDW_AD-7.6: Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Dumps kauft, Vielleicht NSE6_SDW_AD-7.6 Praxispr¨¹fung NSE6_SDW_AD-7.6 Praxispr¨¹fung - Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Pr¨¹fung Zertifizierung ist die richtige Zertifizierung, die Sie suchen, Fortinet NSE6_SDW_AD-7.6 Pr¨¹fungs¨¹bungen Zusätzlich, wie wir wissen, dass größere Firmen höhere Gehälter als die kleine Firmen.
Klaus Held vom Institut f¨¹r Philosophie der Universität Buperta NSE6_SDW_AD-7.6 Pr¨¹fungs¨¹bungen bedanken, Sein Kinn ruhte breit, doppelt und mit einem Ausdruck von Behaglichkeit auf dem weißen Spitzen-Jabot.
Fast2test versprechen, dass wir keine M¨¹he scheuen, um Ihnen zu helfen, die Fortinet NSE6_SDW_AD-7.6 Zertifizierungspr¨¹fung zu bestehen, Jeder Käufer kann den nahen und warmen Kundenservice ¨¹ber das ganze Jahr genießen, wenn er unseren NSE6_SDW_AD-7.6: Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Dumps kauft. Die seit kurzem aktuellsten Fortinet NSE6_SDW_AD-7.6 Pr¨¹fungsunterlagen, 100% Garantie f¨¹r Ihen Erfolg in der Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Pr¨¹fungen!Vielleicht Fortinet NSE 6 Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Pr¨¹fung Zertifizierung ist die NSE6_SDW_AD-7.6 Musterpr¨¹fungsfragen richtige Zertifizierung, die Sie suchen, Zusätzlich, wie wir wissen, dass größere Firmen höhere Gehälter als die kleine Firmen.
Sie wollen die neuesten und g¨¹ltigsten NSE6_SDW_AD-7.6 Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Pass4sure Pr¨¹fung Dumps f¨¹r die 100% Erfolg der Test.
