Title: ROC-RK3568-PC SD Card Boot [Print This Page] Author: therealdev Time: 11/12/2024 19:20 Title: ROC-RK3568-PC SD Card Boot Last edited by therealdev In 11/12/2024 19:36 Editor
Following the ROC-RK3568-PC documentation (https://wiki.t-firefly.com/en/ROC-RK3568-PC/01-bootmode.html), I found that it's possible to boot directly from either the eMMC or SDMMC interface in normal mode. The development board comes pre-installed with Android 11.0 on the eMMC, which I successfully tested with an HDMI display and USB peripherals.
I recently compiled my own custom Android 11.0 build following the instructions provided in the compilation guide (https://wiki.t-firefly.com/en/RO ... d11.0_firmware.html), resulting in the ROC-RK3568-PC_Android11_HDMI_241111.img image (using the public compilation method for the ROC-RK3568-PC).
My question is: How can I burn this image to an SD card and boot the system from it instead of the eMMC? Is this possible? If so, what steps are required? If it¡¯s not feasible to boot directly from the SD card, should I use a firmware upgrade tool to overwrite the eMMC with this new Android version from the SD card? How can I do it?
Could you also provide, or direct me to, a file that details the complete boot process for this board? It would be greatly appreciated!
Note: My host computer is a Ubuntu 24.04