Title: 300-410 Training Pdf - 300-410 Original Questions [Print This Page] Author: jackfox849 Time: yesterday 13:13 Title: 300-410 Training Pdf - 300-410 Original Questions What's more, part of that Prep4sureExam 300-410 dumps now are free: https://drive.google.com/open?id=1RxvALLWG189xaAR-oBdqrUe_BxMLIIoe
Overall obtaining 300-410 certificate can be a valuable investment in your professional career. As it can help you to stand out in a competitive market, more career opportunities, and advancement of your career. To gain all these advantages you just need to enroll in the Cisco 300-410 Certification Exam and put all your efforts to pass this challenging 300-410 exam with flying colors.
Cisco 300-410 exam is part of the CCNP Enterprise certification track. To earn this certification, you need to pass two exams, including the Cisco 350-401 exam and one of the concentration exams, such as the Cisco 300-410 exam. The CCNP Enterprise certification is recognized worldwide and is an excellent way to prove your expertise in implementing and managing enterprise network solutions. Passing the Cisco 300-410 Exam is a significant step towards achieving this certification and advancing your career in the networking field.
Cisco 300-410 exam is a great opportunity for IT professionals to demonstrate their expertise in advanced routing and services in enterprise networks. With the right preparation and study, candidates can pass 300-410 exam and take their careers to the next level.
Cisco 300-410 Original Questions & 300-410 Valid Exam MaterialsOur 300-410 exam braindumps are famous for instant download, and you can receive downloading link and password within ten minutes after buying. Therefore you can start your learning as soon as possible. What¡¯s more, 300-410 exam braindumps offer you free demo to have a try before buying. And we have online and offline chat service stuff who possess the professional knowledge for 300-410 Exam Dumps, if you have any questions, just contact us, we will give you reply as soon as possible.
Cisco 300-410 exam is a proctored exam that consists of 60-70 multiple-choice questions. Candidates have 90 minutes to complete the exam. 300-410 exam is available in English and Japanese. To pass the exam, candidates must score at least 825 out of 1000. 300-410 Exam Fee is $400. Cisco Implementing Cisco Enterprise Advanced Routing and Services Sample Questions (Q433-Q438):NEW QUESTION # 433
Refer to the exhibit. an engineer is trying to get 192.168.32.100 forwarded through 10.1.1.1, but it was forwarded through 10.1.1.2. What action forwards the packets through 10.1.1.1?
A. Configure EIGRP to receive 192.168.32.0 route with equal or longer prefix than /24.
B. Configure EIGRP to receive 192.168.32.0 route with longer prefix than /19.
C. Configure EIGRP to receive 192.168.32.0 route with lower metric.
D. Configure EIGRP to receive 192.168.32.0 route with lower admin distance.
Answer: A
NEW QUESTION # 434
Refer to Exhibit:
AS 111 wanted to use AS 200 as the preferred path for 172.20.5.0/24 and AS 100 as the backup. After the configuration, AS 100 is not used for any other routes. Which configuration resolves the issue?
A. route-mmap SETLP permit 10
match ip address prefix-list PLIST1
set local-preference 99
route-map SETLP permit 20
B. router bgp 111
no neighbor 192.168.10.1 route-map SETLP in
neighbor 192.168.10.1 route-map SETLP out
C. router bap 111
no neighbor 192.168.10.1 route-map SETLP in
neighbor 192.168.20.2 route-map SE TLP in
D. route-map SETLP permit 10
match ip address prefix-list PLIST1
set local-preference 110
route-map SETLP permit 20
Answer: A
Explanation:
Explanation
There is an implicit deny all at the end of any route-map so all other traffic that does not match 172.20.5.0/24 would be dropped. Therefore we have to add a permitsequence at the end of the route-map to allow other traffic.
The default value of Local Preference is 100 and higher value is preferred so we have to set the local preference of AS100 lower than that of AS200.
NEW QUESTION # 435
After some changes in the routing policy, it is noticed that the router in AS 45123 is being used as a transit AS router for several service provides. Which configuration ensures that the branch router in AS 45123 advertises only the local networks to all SP neighbors?
A.
B.
C.
D.
Answer: A
Explanation:
Explanation
By default BGP advertises all prefixes to external BGP neighbors. This means that if you are multi-homed (connected to two or more ISPs) then you might become a transit AS. For example, ISP 2 in AS 200 can send traffic to your router in AS 100 to reach ISP 3 in AS 300 because you advertised prefixes in ISP 3 to ISP 2.
This is what will be seen in the BGP routing table of ISP1:
NEW QUESTION # 436
Refer to the exhibit. A network administrator configured an IPv6 access list to allow TCP return traffic only, but it is not working as expected. Which changes resolve this issue?
A. ipv6 access-list inbound
permit tcp any any established
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound in
B. ipv6 access-list inbound
permit tcp any any syn
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound out
C. ipv6 access-list inbound
permit tcp any any syn
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound in
D. ipv6 access-list inbound
permit tcp any any established
deny ipv6 any any log
!
interface gi0/0
ipv6 traffic-filter inbound out
Answer: A
NEW QUESTION # 437
How is the LDP router ID used in an MPLS network?
A. The loopback with the highest IP address is selected as the router ID.
B. The MPLS LDP router ID must match the IGP router ID.
C. If not configured, the operational physical interface is chosen as the router ID even if a loopback is configured.
D. The force keyword changes the router ID to the specified address without causing any impact.
Answer: A
Explanation:
The first check for an LDP ID is through manual configuration. This would be if you've manually configured the router and told it which interface to be used, or what loopback interface you want used for MPLS. Part of manually specifying what interface a router should use is to configure the IP address sitting on that interface as the Router ID. That's the first check: is there a configured Router ID?
Second, if there is no configured LDP ID, MPLS will default to using the highest IP address on any loopback interface the moment that LDP comes up. Third and last, in the event that we don't have any loopbacks, as a last-ditch effort, the router will use the highest IP address on any of the other interfaces.
