EDGE EDGE-Expertトレーニング & EDGE-Expert資料的中率当社PassTestのEDGE-Expert認定ファイルは、代表的な傑作であり、品質、サービス、革新をリードしています。テストEDGE-Expert認定に関する最も重要な情報を収集し、業界の上級専門家および認定講師および著者によって作成およびコンパイルされた新しい知識ポイントを補足します。クライアントがEDGE-Expertクイズ教材を効率的に学習し、EDGE-Expert試験に合格できるように、実際の試験を刺激する機能などの補助機能を提供します。 EDGE Excellence in Design for Greater Efficiencies (EDGE Expert) Exam 認定 EDGE-Expert 試験問題 (Q64-Q69):質問 # 64
In order for a project to complete the design certification stage requirements, the EDGE Client must do which of the following?
A. Access the EDGE software and begin and complete a full self-assessment of the building.
B. Provide the EDGE Auditor access to the self-assessment and all supporting documentation.
C. Internally review the EDGE measures with their design team and third-party consultant.
D. Review and sign an agreement with a local or global partner to provide EDGE certification services.
正解：B
解説：
The design certification stage (Preliminary Certification) in EDGE requires specific actions from the Client to ensure the project can be audited and certified. The EDGE Certification Protocol outlines the process: "To complete the design certification stage, the EDGE Client must provide the EDGE Auditor with access to the completed self-assessment in the EDGE software, along with all supporting documentation, such as drawings, specifications, and calculations, to verify the selected measures" (EDGE Certification Protocol, Section 3.1:
Certification Process). Option C, provide the EDGE Auditor access to the self-assessment and all supporting documentation, matches this requirement. Option A (internally review the EDGE measures) is a preparatory step, not a certification requirement: "Internal reviews are recommended but not mandated for certification" (EDGE User Guide, Section 6.1: Project Preparation). Option B (access the EDGE software and complete a self-assessment) is a prerequisite to the audit, not the final step for design certification: "The self-assessment must be completed before the audit, but certification requires submission to the Auditor" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (sign an agreement with a certification partner) is incorrect, as this is typically handled during project registration, not design certification: "Agreements with Certification Providers are signed prior to registration, not at the design stage" (EDGE Certification Protocol, Section 2.1: Registration). Thus, providing the Auditor access (Option C) is the required action.
Reference:EDGE Certification Protocol, Section 3.1: Certification Process, Section 2.1: Registration; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
質問 # 65
An EDGE Auditor is auditing a hospital design for Preliminary Certification. The EDGE Client has included photovoltaics as one of the energy measures resulting in an overall 21% saving in energy. The Auditor observes the photovoltaics are facing the wrong direction. What action should the Auditor take?
A. Reject photovoltaics from the selected set of energy measures and notify the Client regarding the orientation.
B. Adjust the area of photovoltaic panels in the assessment to allow for reduction in energy output.
C. Assess the energy measures as they are presented to you, without changing the photovoltaic selection.
D. Contact the design team directly and suggest a better orientation for the photovoltaics.
正解：C
解説：
The role of an EDGE Auditor is to verify the project's self-assessment as submitted, not to modify or redesign the project. The EDGE Expert and Auditor Protocols clearly define the Auditor's responsibilities: "During an audit, the EDGE Auditor must assess the energy measures as presented in the self-assessment, without altering the design or selections made by the Client. If discrepancies are found, such as incorrect orientation of photovoltaics, the Auditor should note the issue in the audit report but proceed with the assessment as submitted, allowing the Certification Provider to make the final decision" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C, assess the energy measures as they are presented without changing the photovoltaic selection, aligns with this protocol. Option A (contact the design team and suggest a better orientation) oversteps the Auditor's role, as they are not to provide design advice: "Auditors must not engage in design consultancy during an audit to avoid conflicts of interest" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option B (adjust the area of photovoltaic panels) involves modifying the assessment, which is prohibited: "Auditors cannot modify the Client's self-assessment; they must evaluate it as submitted" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (reject photovoltaics and notify the Client) is also incorrect, as Auditors do not have the authority to reject measures outright: "Rejection of measures is the responsibility of the Certification Provider, not the Auditor" (EDGE Certification Protocol, Section 3.3: CertificationDecision). Thus, the Auditor should assess as presented (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision.
質問 # 66
For which of the following is EDGE Advanced certification available?
A. Infrastructure constructions
B. Green lease agreements
C. New constructions
D. Parks and landscape projects
正解：C
解説：
The EDGE Standard defines specific project types eligible for certification levels, including EDGE Advanced, which requires at least 40% energy savings. The EDGE Certification Protocol specifies: "EDGE Advanced certification is available for new constructions that achieve a minimum of 40% energy savings compared to the base case, applicable to building typologies such as homes, hotels, offices, hospitals, retail, and schools" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option A, new constructions, aligns with this scope, as EDGE focuses on new buildings across supported typologies. Option B, green lease agreements, is not a building type and is outside EDGE's certification framework. Option C, infrastructure constructions, and Option D, parks and landscape projects, are also not covered under EDGE typologies, as confirmed by the EDGE User Guide: "EDGE certification applies to new buildings and major renovations of specific typologies, excluding infrastructure or landscape-only projects" (EDGE User Guide, Section 1.2:
Scope of EDGE Certification). Thus, only new constructions qualify for EDGE Advanced certification.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification.
質問 # 67
Is it possible to be both the EDGE Expert and Auditor on a project?
A. No, even if EDGE Certifier agrees to special terms to have no conflict of interest.
B. No, an EDGE Expert cannot be the EDGE Auditor on the same project.
C. Yes, they can be both an EDGE Auditor and EDGE Expert in all cases.
D. Yes, but only in the case that there are no other EDGE Auditors available for the project.
正解：B
解説：
The EDGE framework strictly enforces separation of roles to maintain integrity and avoid conflicts of interest during the certification process. The EDGE Expert and Auditor Protocols explicitly address this issue: "An individual cannot serve as both the EDGE Expert and EDGE Auditor on the same project. This separation ensures independence in the audit process, as the Expert's role as a consultant advising the project team could bias the Auditor's objective assessment of the project's compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option A, no, an EDGE Expert cannot be the EDGE Auditor on the same project, directly reflects this rule. Option B (no, even if the Certifier agrees to special terms) adds an unnecessary condition, as the protocols do not allow exceptions: "No exceptions are permitted for an individualto serve in both roles on the same project, regardless of agreements or special terms" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option C (yes, in all cases) is incorrect, as it contradicts the conflict-of-interest rules: "Allowing dual roles in all cases would undermine the impartiality required for certification" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (yes, if no other Auditors are available) is also incorrect, as availability does not override the conflict-of-interest prohibition: "Even if no other Auditors are available, the roles must remain separate; the Client must find a different Auditor or delay the audit" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). The EDGE User Guide reinforces this principle: "The separation of Expert and Auditor roles ensures a fair and unbiased certification process, protecting the credibility of EDGE certification" (EDGE User Guide, Section
6.4: Working with EDGE Experts). Thus, it is not possible to be both (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.4:
Working with EDGE Experts.
質問 # 68
Energy consumption calculations in EDGE are based on:
A. Quasi-steady state calculations.
B. Steady state calculations.
C. Cooling and heating degree days.
D. Hourly simulation.
正解：B
解説：
The EDGE software uses a simplified approach to calculate energy consumption, focusing on accessibility and speed for users in emerging markets. The EDGE Methodology Report explains the calculation method:
"Energy consumption in EDGE is calculated using steady state calculations, which assume constant conditions over a period to estimate energy use for heating, cooling, lighting, and other systems. This method simplifies the modeling process while providing sufficiently accurate results for the purposes of EDGE certification" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option B, steady state calculations, directly matches this approach. Option A (hourly simulation) is incorrect, as EDGE does not use dynamic simulations: "EDGE does not employ hourly simulations, which are more complex and resource-intensive, as the goal is to provide a fast and simple tool" (EDGE User Guide, Section 2.1: EDGE Software Overview). Option C (quasi-steady state calculations) is also incorrect, as EDGE does not use this intermediate method: "Quasi-steady state methods, which account for some dynamic effects, are not used in EDGE to maintain simplicity" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option D (cooling and heating degree days) is a metric used to estimate climate impact, not the calculation method: "Degree days are inputs to the steady state calculations, not the method itself" (EDGE User Guide, Section 3.2: Climate Data Inputs). Thus, steady state calculations (Option B) are used for energy consumption in EDGE.
Reference:EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods; EDGE User Guide Version 2.1, Section 2.1: EDGE Software Overview, Section 3.2: Climate Data Inputs.