Firefly Open Source Community

Title: LEED-AP-Homes Exam Simulator Online | Reliable LEED-AP-Homes Dumps Sheet [Print This Page]
Author: jimwest489    Time: yesterday 10:24
Title: LEED-AP-Homes Exam Simulator Online | Reliable LEED-AP-Homes Dumps Sheet
These people who used our products have thought highly of our LEED-AP-Homes study materials. If you decide to buy our products and tale it seriously consideration, we can make sure that it will be very easy for you to simply pass your exam and get the LEED-AP-Homes certification in a short time. We are also willing to help you achieve your dream. Now give me a chance to show you our LEED-AP-Homes Study Materials. You will have no regret spending your valuable time on our introduction. Besides, our LEED-AP-Homes study quiz is priced reasonably, so we do not overcharge you at all.
Candidates can reach out to the Itcerttest support staff anytime. The Itcerttest help desk is the place to go if you have any questions or problems. Time management is crucial to passing the USGBC LEED-AP-Homes exam. Candidates may prepare for the USGBC LEED-AP-Homes Exam with the help of Itcerttest desktop-based LEED-AP-Homes practice exam software, web-based LEED-AP-Homes practice tests and USGBC LEED-AP-Homes pdf questions.
>> LEED-AP-Homes Exam Simulator Online <<
Reliable LEED-AP-Homes Dumps Sheet, LEED-AP-Homes Answers Real QuestionsAt Itcerttest, we stand behind our USGBC LEED-AP-Homes Exam Questions and offer a money-back guarantee in the event of failure. We are confident that our LEED AP Homes (Residential) Exam (LEED-AP-Homes) exam questions and practice test engine will provide you with all the information and tools you need to pass the exam with flying colors. Plus, for a limited time, we are offering a 20% discount on your purchase. Don't wait ¨C invest in your future and advance your career with Itcerttest today.
USGBC LEED-AP-Homes Exam Syllabus Topics:
TopicDetails
Topic 1
  • Regional Priority Credits: This section of the exam measures the skills of a Regional Performance Advisor. It covers specific environmental credits that reflect local priorities, enabling tailored certification strategies that align with regional ecosystems or regulatory contexts.
Topic 2
  • Materials & Resources: This section of the exam measures the skills of a Sustainability Specialist. It emphasizes the selection and management of eco-friendly materials, efficient usage of resources, and implementation of waste reduction strategies to support green residential construction.
Topic 3
  • Energy and Atmosphere: This section of the exam measures the skills of a Green Building Engineer. It includes evaluating the principles of energy efficiency, performance optimization, and emissions reduction in residential design, all critical to minimizing environmental impact while meeting occupant needs.
Topic 4
  • Innovation: This section of the exam measures the skills of a Design Innovation Lead. It invites professionals to explore creative and exemplary strategies that surpass standard credits¡ªsuch as pilot projects or pioneering sustainability solutions¡ªdemonstrating forward-thinking in residential design.

USGBC LEED AP Homes (Residential) Exam Sample Questions (Q40-Q45):NEW QUESTION # 40
A gut rehab LEED for Homes project will maintain the building's existing exterior wall and floor framing.
Under Materials and Resources Credit, Environmentally Preferable Products category, these components get credit for being:
Answer: B
Explanation:
TheLEED for Homes Rating System (v4)awards points for theMaterials and Resources (MR) Credit:
Environmentally Preferable Productsfor using materials with sustainable attributes, such as reused or salvaged materials. In a gut rehab project, maintaining existing exterior wall and floor framing qualifies these components as reused materials.
According to theLEED Reference Guide for Homes Design and Construction (v4):
MR Credit: Environmentally Preferable Products (1-4 points)
Use products that meet one or more of the following criteria for at least 25%, 50%, or 90% (by cost) of the total materials:
* Reused or salvaged materials: Materials that are reclaimed from the same or another project, such as existing framing maintained in a gut rehab.In gut rehab projects, existing structural components (e.g., wall and floor framing) that are reused in place qualify as reclaimed materials.Source: LEED Reference Guide for Homes Design and Construction, v4, Materials and Resources Credit: Environmentally Preferable Products, p. 160.
TheLEED v4.1 Residential BD+Crating system confirms:
MR Credit: Environmentally Preferable Products
Reclaimed materials, such as existing framing reused in gut rehab projects, contribute to the percentage of environmentally preferable products based on their cost.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The termreclaimed(Option B) is used in LEED to describe materials that are reused or salvaged, such as existing framing kept in place during a gut rehab. This reduces the demand for new materials and aligns with the credit's intent.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 160.
C). Refurbished: Refurbished materials are restored or repaired for reuse (e.g., refinished doors). Framing maintained in place is not refurbished but simply reused, so this term does not apply.Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 160.
D). Restructured: This term is not used in LEED and does not describe the reuse of existing framing.
Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 160.
TheLEED AP Homes Candidate Handbookemphasizes MR credits, including Environmentally Preferable Products, and references theLEED Reference Guide for Homes Design and Constructionas a key resource.
The exam is based onLEED v4, ensuring the relevance of the term "reclaimed." References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Materials and Resources Credit: Environmentally Preferable Products, p. 160.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming reclaimed material criteria.

NEW QUESTION # 41
50% of a new LEED home exterior is clad with salvaged brick; the remaining 50% is clad with wood. In order to earn a point under Materials and Resources Credit, Environmentally Preferable Products, which of the following must be true?
Answer: B
Explanation:
TheLEED for Homes Rating System (v4)awards points for theMaterials and Resources (MR) Credit:
Environmentally Preferable Productswhen materials meet sustainable criteria, such as being reclaimed, recycled, or FSC-certified. The scenario specifies that 50% of the exterior is clad with salvaged (reclaimed) brick, and the remaining 50% is wood.
According to theLEED Reference Guide for Homes Design and Construction (v4):
MR Credit: Environmentally Preferable Products (1-4 points)
Use products that meet one or more of the following criteria for at least 25% (1 point), 50% (2 points), or 90% (3-4 points) by cost of the total materials:
* Reused or salvaged materials: Materials reclaimed from the same or another project, such as salvaged brick.
* FSC-certified wood: Wood products certified by the Forest Stewardship Council.To earn 1 point, at least 25% of the total material cost must meet one or more criteria, with products like salvaged brick qualifying as reclaimed.Source: LEED Reference Guide for Homes Design and Construction, v4, Materials and Resources Credit: Environmentally Preferable Products, p. 160-161.
TheLEED v4.1 Residential BD+Crating system confirms:
MR Credit: Environmentally Preferable Products
Reclaimed materials, such as salvaged brick, contribute to the percentage of environmentally preferable products based on their cost. A minimum of 25% by cost is required for 1 point.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
In this scenario, 50% of the exterior cladding is salvaged brick, which qualifies as reclaimed material. Sinceat least half of the siding is reclaimed(Option C), this meets the 25% threshold for 1 point, assuming the material cost proportion aligns. The wood portion does not need to be FSC-certified or reclaimed unless additional points are targeted.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 160.
B). Cladding combinations cannot earn points: This is incorrect; combinations of reclaimed, FSC-certified, or other qualifying materials can earn points based on total material cost.Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit: Environmentally Preferable Products, p. 161.
D). At least half of the wood siding is both reclaimed and local: The wood does not need to be reclaimed or local; the salvaged brick (50% of siding) already qualifies for the credit. Local production is a separate option (Option 1).Reference: LEED Reference Guide for Homes Design and Construction, v4, MR Credit:
Environmentally Preferable Products, p. 160.
TheLEED AP Homes Candidate Handbookemphasizes MR credits, including Environmentally Preferable Products, and references theLEED Reference Guide for Homes Design and Constructionas a key resource.
The exam is based onLEED v4, ensuring the relevance of reclaimed materials.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Materials and Resources Credit: Environmentally Preferable Products, p. 160-161.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming reclaimed material criteria.

NEW QUESTION # 42
Points can be earned for Energy and Atmosphere Credit: Efficient Hot Water Distribution System, Option 1 through which of the following measures?
Answer: A
Explanation:
TheLEED for Homes Rating System (v4)includes theEnergy and Atmosphere (EA) Credit: Efficient Hot Water Distribution System, which aims to reduce energy and water waste in hot water delivery.Option 1:
Length of Pipingfocuses on minimizing the length of hot water piping to reduce heat loss and delivery time.
According to theLEED Reference Guide for Homes Design and Construction (v4):
EA Credit: Efficient Hot Water Distribution System, Option 1. Length of Piping (1-2 points) Design and install the hot water distribution system to meet one of the following requirements:
* Maximum branch line length: The length of any branch line from the water heater or hot water source to any fixture must not exceed 20 feet (6 meters) for 1 point, or 10 feet (3 meters) for 2 points.This reduces the volume of water that must be purged before hot water reaches the fixture, saving energy and water.Source: LEED Reference Guide for Homes Design and Construction, v4, Energy and Atmosphere Credit: Efficient Hot Water Distribution System, p. 132.
TheLEED v4.1 Residential BD+Crating system maintains this requirement:
EA Credit: Efficient Hot Water Distribution
Option 1: Limit the length of branch lines from the water heater to fixtures to 20 feet (6 meters) for 1 point or
10 feet (3 meters) for 2 points.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
Limiting branch line length(Option A) directly aligns with Option 1 of this credit, as it reduces the distance hot water must travel, minimizing heat loss and water waste.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Efficient Hot Water Distribution System, p. 133.
C). Installing demand-controlled recirculation: This is part ofOption 3: Demand-Controlled Recirculation in LEED v4, where recirculation systems are activated only when hot water is needed (e.g., via a button or motion sensor). It is not part of Option 1.Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Credit: Efficient Hot Water Distribution System, p. 133.
D). Insulating all domestic hot water piping to R-4: While pipe insulation is a best practice and may be required in some EA credits (e.g., EA Prerequisite: Minimum Energy Performance), it is not a specific requirement for Option 1 of the Efficient Hot Water Distribution System credit. Insulation reduces heat loss but does not address branch line length.Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Prerequisite: Minimum Energy Performance, p. 112.
TheLEED AP Homes Candidate Handbookemphasizes EA credits, including hot water distribution, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of Option 1's focus on branch line length.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Energy and Atmosphere Credit: Efficient Hot Water Distribution System, p. 132-133.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming branch line length criteria.

NEW QUESTION # 43
Which member of the verification team conducts field inspections of LEED prerequisites and credits?
Answer: D
Explanation:
TheLEED for Homes Rating System (v4)requires third-party verification for prerequisites and credits, with specific roles defined for the verification team. TheLEED Green Rateris responsible for conducting field inspections to verify compliance.
According to theLEED Reference Guide for Homes Design and Construction (v4):
Verification Process
The LEED Green Rater, a trained professional certified by the Green Building Certification Institute (GBCI), conducts field inspections to verify compliance with LEED for Homes prerequisites and credits, including energy, water, and indoor environmental quality measures.
Source: LEED Reference Guide for Homes Design and Construction, v4, Introduction, p. 28.
TheLEED v4.1 Residential BD+Crating system confirms:
Verification Process
The LEED Green Rater performs on-site inspections to ensure that the project meets all prerequisites and targeted credits, documenting compliance for certification.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isLEED Green Rater(Option D), as this team member is responsible for field inspections of LEED prerequisites and credits.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, EA Prerequisite: Minimum Energy Performance, p. 112.
B). LEED for Homes Provider: The Provider oversees the certification process and coordinates verification but does not conduct field inspections.Reference: LEED Reference Guide for Homes Design and Construction, v4, Introduction, p. 28.
C). LEED for Homes QAD: The Quality Assurance Designee (QAD) reviews documentation for quality control, not field inspections.Reference: LEED Reference Guide for Homes Design and Construction, v4, Introduction, p. 28.
TheLEED AP Homes Candidate Handbookemphasizes the verification process, including the role of the Green Rater, and references theLEED Reference Guide for Homes Design and Constructionas a key resource. The exam is based onLEED v4, ensuring the relevance of the Green Rater's role.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Introduction, p. 28.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming verification roles.

NEW QUESTION # 44
How could a LEED AP assist a home builder in evaluating a site for a new LEED for Homes single-family residence?
Answer: C
Explanation:
TheLEED for Homes Rating System (v4)emphasizes site evaluation for credits likeLocation and Transportation (LT) Credit: Site Selection, which includes assessing past development activity to determine eligibility for options such as infill development or avoiding sensitive land.
According to theLEED Reference Guide for Homes Design and Construction (v4):
LT Credit: Site Selection (1-3 points)
Evaluate the site to determine if it meets criteria for infill development (e.g., at least 75% of the perimeter borders previously disturbed land) or avoids environmentally sensitive areas (e.g., prime farmland, floodplains). A LEED AP can assist by assessing past development activity to confirm eligibility for credits like Option 2: Infill Development.
Source: LEED Reference Guide for Homes Design and Construction, v4, Location and Transportation Credit: Site Selection, p. 54.
TheLEED v4.1 Residential BD+Crating system confirms:
LT Credit: Site Selection
A key step in site evaluation is determining whether the site has been previously developed or disturbed, which supports credits for infill or brownfield redevelopment.
Source: LEED v4.1 Residential BD+C, Credit Library, accessed via USGBC LEED Online.
The correct answer isevaluate the site for any past development activity(Option B), as this directly supports achievingLT Credit: Site Selectionby confirming eligibility for infill development or other site-related credits.
Why not the other options?
Reference: LEED Reference Guide for Homes Design and Construction, v4, LT Credit: Community Resources and Services, p. 56.
C). Evaluate the potential for site pollution from adjoining properties: While pollution assessment may be relevant for brownfield sites, it is not a primary focus of LT credits for single-family homes.Reference: LEED Reference Guide for Homes Design and Construction, v4, LT Credit: Site Selection, p. 54.
D). Determine if the location is in the city limits: City limits are not a specific criterion for LT credits; proximity to services or site characteristics are prioritized.Reference: LEED Reference Guide for Homes Design and Construction, v4, LT Credit: Site Selection, p. 54.
TheLEED AP Homes Candidate Handbookemphasizes the role of the LEED AP in site evaluation for LT credits and references theLEED Reference Guide for Homes Design and Constructionas a key resource.
The exam is based onLEED v4, ensuring the relevance of past development assessment.
References:
LEED Reference Guide for Homes Design and Construction, v4, USGBC, Location and Transportation Credit: Site Selection, p. 54.
LEED v4.1 Residential BD+C, USGBC LEED Credit Library, accessed via LEED Online (https://www.
usgbc.org/credits).
LEED AP Homes Candidate Handbook, GBCI, October 2024, p. 12 (references study resources and exam scope based on LEED v4).
USGBC LEED for Homes Rating System (v4), available via USGBC website (https://www.usgbc.org
/resources/leed-homes-design-and-construction-v4).
LEED v4.1 for Homes, USGBC, accessed via LEED Online, confirming site evaluation criteria.

NEW QUESTION # 45
......
It is essential to get the USGBC LEED-AP-Homes exam material because you have no other option to understand the subject. LEED AP Homes (Residential) Exam LEED-AP-Homes have latest exam answers, latest exam book and latest exam collection. Itcerttest offers valid exam book and valid exam collection help you pass the LEED-AP-Homes Exam successfully.
Reliable LEED-AP-Homes Dumps Sheet: https://www.itcerttest.com/LEED-AP-Homes_braindumps.html
Author: carlsta668    Time: yesterday 10:49
Thank you for your powerful article, it left a lasting impression. The AD0-E124 latest associate level exam questions helped me secure a raise and promotion, and today, I¡¯m sharing them for free!



Welcome Firefly Open Source Community (https://bbs.t-firefly.com/) Powered by Discuz! X3.1