EDGE-Expert試験の準備方法｜実用的なEDGE-Expertテストサンプル問題試験｜正確的なExcellence in Design for Greater Efficiencies (EDGE Expert) Exam日本語あなたはまだ試験について心配していますか？心配しないで！ EDGE-Expert試験トレントは、作業または学習プロセス中にこの障害を克服するのに役立ちます。 EDGE-Expertテスト準備の指示の下で、非常に短時間でタスクを完了し、間違いなく試験に合格してEDGE-Expert証明書を取得できます。サービスをさまざまな個人に合わせて調整し、わずか20〜30時間の練習とトレーニングの後、目的の試験に参加できるようにします。さらに、理論と内容に関してEDGE-Expertクイズトレントを毎日更新する専門家がいます。 EDGE Excellence in Design for Greater Efficiencies (EDGE Expert) Exam 認定 EDGE-Expert 試験問題 (Q73-Q78):質問 # 73
When must the registration fee be paid?
A. After certification has been awarded
B. Prior to site audit
C. After the registration
D. Prior to registration
正解：D
解説：
The EDGE certification process involves specific steps and fees, including a registration fee, to formally enter a project into the certification system. The EDGE Certification Protocol outlines the timing of the registration fee: "The registration fee must be paid prior to registration of the project in the EDGE system. This fee is required to activate the project in the EDGE App, allowing the Client to begin the self-assessment process and proceed toward certification" (EDGE Certification Protocol, Section 2.1: Registration). Option B, prior to registration, directly matches this requirement, as payment is a prerequisite for starting the certification process. Option A (prior to site audit) is incorrect, as the site audit occurs later, at the post-construction stage:
"The site audit takes place after practical completion, well after registration, so the registration fee is not tied to this stage" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option C (after the registration) is also incorrect, as payment must precede registration: "Registration cannot be completed without payment of the registration fee, ensuring the project is officially entered into the system" (EDGE User Guide, Section 6.1: Project Preparation). Option D (after certification has been awarded) is wrong, as certification occurs at the end of the process, after registration and audits: "Certification fees may be paid after certification, but the registration fee is required at the outset, before any assessment begins" (EDGE Certification Protocol, Section 3.3: Certification Decision). The EDGE User Guide further clarifies: "Paying the registration fee prior to registration ensures that the project is formally recognized by the EDGE system, enabling access to the software and certification resources" (EDGE User Guide, Section 6.1: Project Preparation). Thus, the registration fee must be paid prior to registration (Option B).
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 3.4: Post-Construction Requirements, Section 3.3: Certification Decision; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
質問 # 74
A building achieved EDGE certification three years ago and obtained 30% energy savings. Solar panels have been added, which increased the energy savings to 60%. If carbon offsets are purchased for the remainder of the energy use, when should an EDGE Zero Carbon certification application be filed?
A. At the same time as the EDGE Advanced certification and only after gathering two years of operational data
B. No wait time required as the project is already EDGE certified
C. After achieving EDGE Advanced certification and gathering one year of operational data
D. As soon as one year of operational data can be provided
正解：C
解説：
EDGE Zero Carbon certification requires specific prerequisites and operational data to verify performance.
The EDGE Certification Protocol details the requirements: "To apply for EDGE Zero Carbon certification, a project must first achieve EDGE Advanced certification, which requires at least 40% energy savings.
Additionally, EDGE Zero Carbon certification mandates at least one year of operational data at 75% occupancy to confirm energy performance, after which carbon offsets can be purchased for the remaining energy use to achieve zero carbon status" (EDGE Certification Protocol, Section 2.3: Certification Levels). In this scenario, the building's energy savings have increased to 60% with solar panels, qualifying it for EDGE Advanced (40% minimum). The next step is to gather one year of operational data before applying for EDGE Zero Carbon, making Option C (after achieving EDGE Advanced certification and gathering one year of operational data) correct. Option A (as soon as one year of operational data) skips the EDGE Advanced requirement: "EDGE Advanced is a prerequisite for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option B (no wait time) is incorrect, as operational data is mandatory:
"Operational data is required to verify performance for Zero Carbon certification" (EDGE User Guide, Section 6.3: Advanced Certifications). Option D (at the same time as EDGE Advanced and after two years) is wrong, as only one year of data is needed: "One year of operational data at 75% occupancy is sufficient for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Thus, Option C is the correct timeline.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications.
質問 # 75
Which of the following wall solar reflectivity indexes would be the most energy efficient in a hot climate?
A. 0.3
B. 0.2
C. 0.4
D. 0.7
正解：D
解説：
In hot climates, reducing heat gain through building envelopes is a key strategy for energy efficiency, as emphasized in EDGE's green building design principles. The EDGE User Guide discusses solar reflectivity (measured by the Solar Reflectance Index, SRI) for walls and roofs, stating: "Higher SRI values indicate greater reflectivity, which reduces heat absorption and lowers cooling energy demand in hot climates. For walls in hot climates, an SRI of 0.7 or higher is recommended to maximize energy savings" (EDGE User Guide, Section 3.5: Passive Design Strategies). The options provided are 0.2, 0.3, 0.4, and 0.7. Since 0.7 is the highest SRI value among the choices, it reflects the most solar radiation, thereby reducing the cooling load andimproving energy efficiency in a hot climate, as per EDGE's guidance. Options A, B, and C have lower SRI values and would result in greater heat absorption, increasing energy use for cooling.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies.
質問 # 76
During a design audit, an EDGE Auditor notices that the project does not meet the EDGE standard for energy.
Which of the following is an acceptable course of action for the Auditor?
A. Ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard.
B. As the project does not qualify for EDGE certification, the EDGE Auditor does not have to take any further action on the project.
C. Contact the design team directly to work with them to find a solution to improve the energy efficiency performance of the project.
D. Based on the Auditor's previous experience on working on similar projects, provide a list of measures that the Client could incorporate in the project that will take them comfortably over the EDGE standard.
正解：A
解説：
The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: "If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor's independence: "The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: "If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor's experience) oversteps the Auditor's role by offering consultancy: "The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: "During a design audit, the Auditor's role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert" (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: "The Auditor's report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.
質問 # 77
How many years of experience in related fields are required for applicants without a construction-related higher qualification to become an EDGE Expert?
A. At least 5 years
B. At least 2 years
C. At least 1 year
D. At least 3 years
正解：D
解説：
The eligibility criteria for becoming an EDGE Expert are designed to ensure candidates have sufficient background to advise on green building projects. The EDGE Expert and Auditor Protocols specify the requirements for candidates without a construction-related higher qualification: "Applicants without a higher education qualification in a construction-related field (e.g., architecture, engineering) must have a higher education qualification in any field plus at least three years of experience in the construction industry as a skilled professional or tradesperson to qualify for EDGE Expert training and certification" (EDGE Expert and Auditor Protocols, Section 3.1: Eligibility Criteria). Option C, at least 3 years, directly matches this requirement. Option A (at least 1 year) and Option B (at least 2 years) are insufficient, as they fall below the minimum threshold: "Less than three years of experience does not meet the eligibility criteria for candidates without a construction-related degree, as this duration ensures adequate practical knowledge of building design and construction processes" (EDGE Expert and Auditor Protocols, Section 3.1: Eligibility Criteria).
Option D (at least 5 years) exceeds the minimum requirement, which is not necessary: "While additional experience is beneficial, the minimum requirement for EDGE Expert eligibility is three years for non- construction degree holders" (EDGE User Guide, Section 6.4: Working with EDGE Experts). The EDGE Certification Protocol also notes: "The three-year experience requirement for non-construction graduates ensures that EDGE Experts have sufficient industry exposure to provide meaningful consultancy, balancing accessibility with competence" (EDGE Certification Protocol, Section 1.3: Program Structure). Additionally, the EDGE User Guide clarifies: "Candidates with a construction-related degree are exempt from the experience requirement, but those without such a degree must demonstrate at least three years of relevant experience to qualify for the EDGE Expert exam" (EDGE User Guide, Section 6.4: Working with EDGE Experts). Therefore, at least 3 years of experience (Option C) is required for applicantswithout a construction- related higher qualification.
Reference:EDGE Expert and Auditor Protocols, Section 3.1: Eligibility Criteria; EDGE Certification Protocol, Section 1.3: Program Structure; EDGE User Guide Version 2.1, Section 6.4: Working with EDGE Experts.