權威的FCSS_SDW_AR-7.6指南和資格考試的領導者和最新的Fortinet FCSS - SD-WAN 7.6 Architect作為一位 FCSS_SDW_AR-7.6 考生而言，作好充分的準備可以幫助您通過考試。Testpdf 的 FCSS_SDW_AR-7.6 題庫覆蓋了最新的 FCSS_SDW_AR-7.6 考試指南及考試真題題型。FCSS_SDW_AR-7.6 隸屬于 Fortinet 認證考試科目。我們的 FCSS_SDW_AR-7.6 認證考題已經幫助很多考生通過考試，試題質量和考題的覆蓋率都有保證，保證考生權利不受任何損失。獲取 FCSS_SDW_AR-7.6 考試認證證書可以用來實施一些複雜多變的工程。 最新的 Fortinet Certified Solution Specialist FCSS_SDW_AR-7.6 免費考試真題 (Q40-Q45):問題 #40
Which statement describes FortiGate behavior when you reference a zone in a static route?
A. FortiGate ignores the static routes defined through members referenced in the zone.
B. FortiGate installs a static route for each member in the zone.
C. FortiGate routes the traffic through the best performing member of the zone.
D. FoftiGate installs ECMP static routes for the first two members of the zone.
答案：B
解題說明：
When you reference a zone in a static route, FortiGate automatically installs a separate static route for each interface (member) in that zone.
問題 #41
Refer to the exhibit. Which action will FortiGate take if it detects SD-WAN members as dead?
A. FortiGate sends alert messages through poft5 when it detects all SD-WAN members as dead.
B. FortiGate fails over to the secondary device after it detects port5 as dead.
C. FoftiGate bounces port5 after it detects all SD-WAN members as dead.
D. FortiGate brings down port5 after it detects all SD-WAN members as dead.
答案：D
解題說明：
問題 #42
Refer to the exhibits. You connect to a device behind a branch FortiGate device and initiate a ping test. The device is part of the LAN subnet and its IP address is 10.0.1.101.
Based on the exhibits, which interface uses branch 1_fgt to steer the test traffic?
A. port2
B. port4
C. port1
D. HUB1-VPN1
答案：A
解題說明：
The ping target IP 157.240.19.35 matches an App Control entry for Facebook (ID 15832).
According to the diagnose firewall route list output, this application is handled by vwl_service=2 (Non-Critical-DIA), which routes traffic via oif=4 (port2). Therefore, FortiGate steers the Facebook test traffic through port2.
問題 #43
(Refer to the exhibits.
You collected the output shown in the exhibits and want to know which interface HTTP traffic will flow through from the user device 10.0.1.101 to the corporate web server 10.0.0.126. All SD-WAN links are stable.
Which interface will FortiGate use to steer the traffic? Choose one answer.)
A. Either HUB1-VPN1, HUB1-VPN2, or HUB1-VPN3
B. Either HUB1-VPN2 or HUB1-VPN3
C. Only HUB1-VPN3
D. Only HUB1-VPN2
答案：A
解題說明：
From the SD-WAN service configuration, rule edit 3 (name "Corp") is configured with:
set mode sla
set load-balance enable
set dst "Corp-net"
set src "LAN-net"
SLA checks referenced under config sla
Traffic from 10.0.1.101 to 10.0.0.126 matches this rule because the destination is within the corporate network range (shown in the policy-route/proute output as destination 10.0.0.0-10.255.255.255 for the Corp service).
In the diagnose firewall proute list output for vwl_service=3 (Corp), FortiGate shows which SD-WAN members are eligible based on SLA pass results:
oif=21 (HUB1-VPN3) num_pass=2
oif=20 (HUB1-VPN2) num_pass=0
oif=19 (HUB1-VPN1) num_pass=0
This indicates that, for the SLA-based rule, only HUB1-VPN3 is meeting the SLA requirements (it is the only member with num_pass=2). The other members have num_pass=0, so they are not eligible for forwarding under this SLA rule even though links are up.
The sniffer trace further corroborates the forwarding decision by showing the traffic egressing through HUB1-VPN3.
Therefore, FortiGate will steer the HTTP traffic through only HUB1-VPN3, which corresponds to Option A.
問題 #44
(When you deploy SD-WAN, you can choose from several common designs. Each design best applies to specific contexts.
Which two statements correctly associate a common SD-WAN design with its main indication or constraint? Choose two answers.)
A. Use a standalone design for sites with only one WAN link to the cloud.
B. Use a direct internet access (DIA) design to increase the traffic security and allow local devices with limited capabilities.
C. Use a cloud on-ramp topology to improve the performance of cloud applications.
D. Use remote breakout to centralize traffic inspection and limit local management requirements.
答案：C,D
解題說明：
The FCSS SD-WAN 7.6 curriculum describes multiple standard SD-WAN deployment designs, each mapped to a specific operational goal or constraint.
A cloud on-ramp topology is designed to optimize connectivity to cloud services such as SaaS and IaaS. This design provides the most efficient and reliable path to cloud applications by establishing direct tunnels to cloud gateways or cloud workloads and by avoiding backhauling traffic through a central data center. As a result, its primary indication is improving the performance of cloud applications, which makes option A correct.
A remote breakout (centralized breakout) design forwards all internet-bound traffic from branch sites to a central hub for security inspection. This allows security policies, inspection, and logging to be centralized on a high-capacity FortiGate at the hub. Because branch devices do not need advanced local security configurations, this design also limits local management requirements, which makes option C correct.
Option B is incorrect because a standalone SD-WAN design is not selected simply because a site has only one WAN link. SD-WAN provides its main benefits when multiple WAN paths exist, and single-link sites do not gain meaningful traffic-steering advantages.
Option D is incorrect because a direct internet access (DIA) design performs local internet breakout at the branch and therefore requires strong local security capabilities. DIA does not inherently increase traffic security and is not intended for devices with limited capabilities.
Therefore, the two correct associations are A and C.
從Google Drive中免費下載最新的Testpdf FCSS_SDW_AR-7.6 PDF版考試題庫：https://drive.google.com/open?id=1DdgA5wedeikZCN2CyXHZAWRUhxlrkF0S Author: zachpar821 Time: 12 hour before
Die Kandidaten können die Schulungsunterlagen zur Oracle 1z0-1054-25 Zertifizierungsprüfung von ZertPruefung in einer Simulationsumgebung lernen. Sie können die Prüfungssorte und die Testzeit kontrollieren. In ZertPruefung können Sie sich ohne Druck und Stress gut auf die Oracle 1z0-1054-25 Prüfung vorbereiten. Zugleich können Sie auch einige häufige Fehler vermeiden. So werden Sie mehr Selbstbewusstsein in der Oracle 1z0-1054-25 Prüfung haben. In der realen Prüfung können Sie Ihre Erfahrungen wiederholen, um Erfolg in der Prüfung zu erzielen.
Welcome Firefly Open Source Community (https://bbs.t-firefly.com/)
