Title: NSE4_FGT_AD-7.6 Latest Dumps Ebook - Valid NSE4_FGT_AD-7.6 Exam Cost [Print This Page] Author: carllew161 Time: 12 hour before Title: NSE4_FGT_AD-7.6 Latest Dumps Ebook - Valid NSE4_FGT_AD-7.6 Exam Cost P.S. Free & New NSE4_FGT_AD-7.6 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=1ECm-r9P0WoGXPR4ZFm6AuScobkSFHF2R
As is known to us, a suitable learning plan is very important for all people. For the sake of more competitive, it is very necessary for you to make a learning plan. We believe that our NSE4_FGT_AD-7.6 actual exam will help you make a good learning plan. You can have a model test in limited time by our NSE4_FGT_AD-7.6 Study Materials, if you finish the model test, our system will generate a report according to your performance. You can know what knowledge points you do not master. By the report from our NSE4_FGT_AD-7.6 study questions. Then it will be very easy for you to pass the NSE4_FGT_AD-7.6 exam.
Our NSE4_FGT_AD-7.6 exam questions are perfect, unique and the simplest for all exam candidates for varying academic backgrounds. This is the reason that our NSE4_FGT_AD-7.6 study guide assures you of a guaranteed success in the exam. The second you download our NSE4_FGT_AD-7.6 learning braindumps, then you will find that they are easy to be understood and enjoyable to practice with them. And there are three versions of the NSE4_FGT_AD-7.6 praparation engine for you to choose: the PDF, Software and APP online.
Earn the Credential of Fortinet NSE4_FGT_AD-7.6 ExamAdapt to the network society, otherwise, we will take the risk of being obsoleted. Our NSE4_FGT_AD-7.6 qualification test help improve your technical skills and more importantly, helping you build up confidence to fight for a bright future in tough working environment. Our professional experts devote plenty of time and energy to developing the NSE4_FGT_AD-7.6 Study Tool. You can trust us and let us be your honest cooperator in your future development. Here are several advantages about our NSE4_FGT_AD-7.6 exam for your reference. Fortinet NSE 4 - FortiOS 7.6 Administrator Sample Questions (Q52-Q57):NEW QUESTION # 52
Refer to the exhibits.
The exhibits show a diagram of a FortiGate device connected to the network, as well as the firewall policy and IP pool configuration on the FortiGate device.
Two PCs, PC1 and PC2, are connected behind FortiGate and can access the internet successfully. However, when the administrator adds a third PC to the network (PC3), the PC cannot connect to the internet.
Based on the information shown in the exhibit, which two configuration options can the administrator use to fix the connectivity issue for PC3? (Choose two.)
A. Configure another firewall policy that matches only the address of PC3 as source, and then place the policy on top of the list.
B. In the firewall policy configuration, add 10.0.1.3as an address object in the source field.
C. In the IP pool configuration, set endipto 192.2.0.12.
D. In the IP pool configuration, set typeto overload.
Answer: C,D
Explanation:
With IP pool type set to One-to-One, only as many internal hosts as there are public IPs in the pool (192.2.0.10-192.2.0.11) can use NAT. Changing the type to overload allows all internal hosts (including PC3) to share the available public IPs, so PC3 can reach the internet.
Alternatively, keeping One-to-One but extending the pool to 192.2.0.10-192.2.0.12 adds another public IP, allowing a third internal host (PC3) to be mapped and gain internet access.
NEW QUESTION # 53
An administrator has configured a dialup IPsec VPN on FortiGate with add-route enabled. However, the static route is not showing in the routing table. Which two statements about this scenario are correct? (Choose two.)
A. The administrator must ensure phase 2 is successfully established
B. The administrator must use a policy route instead of a static route for add-route to work properly.
C. The administrator must enable a dynamic routing protocol on the dialup interface.
D. The administrator must define the remote network correctly in the phase 2 selectors.
Answer: A,D
Explanation:
With a dialup IPsec VPN on FortiGate, when add-route is enabled, FortiGate will only install the corresponding route when it has enough negotiated information from the tunnel. In FortiOS 7.6, that means the route is tied to the Phase 2 (Quick Mode) selectors and is created dynamically when the IPsec SA is actually up.
B . The administrator must ensure phase 2 is successfully established
This is required. FortiGate does not install the add-route route just because Phase 1 exists or because the configuration is present. The route is added when the tunnel is effectively usable, which requires Phase 2 (IPsec SA) to be up. If Phase 2 is not established, there is no active SA and FortiGate will not inject the related route into the routing table.
So, if the static route is not showing, one correct explanation is that Phase 2 is not up.
C . The administrator must define the remote network correctly in the phase 2 selectors This is also required. For dialup tunnels, FortiGate derives what route to add from the remote subnet(s) defined in the Phase 2 selector (proxy ID). If the remote network in Phase 2 is missing, incorrect, or too broad/too narrow in a way that prevents negotiation, the tunnel either won't come up (so no route), or the route that would be installed won't match what the administrator expects.
So, another correct explanation is that the Phase 2 remote network is not correctly defined, preventing the correct route from being created.
Why the other options are incorrect
A . Policy route instead of a static route
Add-route does not require policy routes. It is specifically a feature that injects a route (route-table entry) associated with the IPsec tunnel/SA and the Phase 2 selector networks.
D). Enable a dynamic routing protocol
Dynamic routing protocols (OSPF/BGP/RIP) are not required for add-route. Add-route is independent of dynamic routing and works by installing routes locally based on the negotiated selectors.
NEW QUESTION # 54
Refer to the exhibit showing a debug flow output.
Which two conclusions can you make from the debug flow output? (Choose two.)
A. The default gateway is configured on port2.
B. The RPF check fails.
C. The matching firewall policy denies the traffic.
D. The debug flow is for UDP traffic.
Answer: A,C
Explanation:
The default gateway is configured on port2 ¡ú The debug output shows find a route:
flag=00000000 gw-0.0.0.0 via port2, which indicates that the default route (0.0.0.0/0) points out port2.
The matching firewall policy denies the traffic ¡ú The log line Denied by forward policy check (policy 2) confirms that policy 2 matched and explicitly dropped the traffic.
NEW QUESTION # 55
Refer to the exhibits.
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?
A. Change the csfsetting on ISFW (downstream) to set configuration-sync local.
B. Change the csfsetting on Local-FortiGate (root) to set fabric object-unification default.
C. Change the csfsetting on ISFW (downstream) to set authorization-request-type certificate.
D. Change the csfsetting on both devices to set downstream-access enable.
Answer: B
Explanation:
The CLI command fabric-object-unification is available only on the root FortiGate device. When set to local, global objects are not synchronized to downstream devices in the Security Fabric.
The default value is default.
NEW QUESTION # 56
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 failed to come up. The administrator has also re- entered the pre-shared key on both FortiGate devices to make sure they match.
Based on the phase 1 configuration and the diagram shown in the exhibit, which two configuration changes can the administrator make to bring phase 1 up? (Choose two.)
A. On Remote-FortiGate, set port2 as Interface.
B. On both FortiGate devices, set Dead Peer Detection to On Demand.
C. On HQ-FortiGate, disable Diffie-Helman group 2.
D. On HQ-FortiGate, set IKE mode to Main (ID protection).
Answer: A,D
Explanation:
On the HQ-FortiGate the IKE phase 1 mode is set to Aggressive, while on the Remote-FortiGate it is set to Main (ID protection). Both sides must use the same IKE mode for phase 1 to come up, so changing HQ-FortiGate to Main mode resolves this mismatch.
On the Remote-FortiGate, the phase 1 Interface is configured as port1, but according to the diagram the WAN-facing interface with IP 10.10.200.10 is port2. The local interface in the IPsec configuration must match the physical WAN interface, so changing it to port2 is required for the tunnel to establish.
NEW QUESTION # 57
......
Getting tired of humdrum life, you may want to get some successful feeling or try something different instead. We all know that is of important to pass the NSE4_FGT_AD-7.6 exam and get the NSE4_FGT_AD-7.6 certification for someone who wants to find a good job in internet area, and it is not a simple thing to prepare for exam. So you are in the right place now. The NSE4_FGT_AD-7.6 practice materials are a great beginning to prepare your exam. Actually, just think of our Fortinet practice materials as the best way to pass the exam is myopic. They can not only achieve this, but ingeniously help you remember more content at the same time. Valid NSE4_FGT_AD-7.6 Exam Cost: https://www.pass4suresvce.com/NSE4_FGT_AD-7.6-pass4sure-vce-dumps.html
Fortinet NSE4_FGT_AD-7.6 Latest Dumps Ebook It is very important for us to keep pace with the changeable world and update our knowledge if we want to get a good job, a higher standard of life and so on, Fortinet NSE4_FGT_AD-7.6 Latest Dumps Ebook What is most invaluable is that this kind of action will be kept for one year for free, As a matter of fact, if you choose your NSE4_FGT_AD-7.6 exam prep, you will find yourself bathed in the atmosphere of gentle manner.
VMware refers to this technology as virtual NSE4_FGT_AD-7.6 lockstep or vLockstep, Our goals will be to: Create backups, It is very important for us to keep pace with the changeable world and NSE4_FGT_AD-7.6 PDF VCE update our knowledge if we want to get a good job, a higher standard of life and so on. Efficient NSE4_FGT_AD-7.6 Latest Dumps Ebook, Ensure to pass the NSE4_FGT_AD-7.6 ExamWhat is most invaluable is that this kind of action will be kept for one year for free, As a matter of fact, if you choose your NSE4_FGT_AD-7.6 Exam Prep, you will find yourself bathed in the atmosphere of gentle manner.
We offer customers immediate delivery after they have paid NSE4_FGT_AD-7.6 PDF VCE for the Fortinet latest reviews, that is, they will get what they buy from the moment of making a purchase, which is not available if you choose other kinds NSE4_FGT_AD-7.6 Latest Dumps Ebook of exam files of other platforms, because they always take several days to deliver their products to clients.
With our NSE4_FGT_AD-7.6 learning materials for 20 to 30 hours, we can claim that you will be confident to go to write your NSE4_FGT_AD-7.6 exam and pass it.
