Title: Valid Test 300-710 Format, 300-710 Certification Exam Infor [Print This Page] Author: nicksha925 Time: before yesterday 22:29 Title: Valid Test 300-710 Format, 300-710 Certification Exam Infor DOWNLOAD the newest VCETorrent 300-710 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1ZaBTnYkYHKQq6fRjzQNNTUeX-gaIr_Dl
VCETorrent 300-710 exam training materials can help you save a lot of time and energy, and make you yield twice the result with half effort to pass 300-710 certification exam. After you purchase our 300-710 exam dumps, we will also provide one year free renewal service for you. If there's any quality problem in 300-710 Exam Dumps you buy or you fail 300-710 certification exam, we promise to give you a full refund unconditionally.
Cisco 300-710 exam covers a wide range of topics, including Cisco Firepower Management Center (FMC) features and functions, NGFW policies and rules, application control, intrusion prevention systems (IPS), advanced malware protection (AMP), and URL filtering. 300-710 exam also covers topics such as network address translation (NAT), virtual private networks (VPNs), and high availability configurations. The Cisco 300-710 certification exam is a comprehensive exam that requires a deep understanding of Cisco Firepower technology and its application in securing network infrastructures.
Earning the Cisco 300-710 certification not only validates a candidate's skills and knowledge in securing network environments using Cisco Firepower NGFWs but also opens up new career opportunities. Securing Networks with Cisco Firepower certification is highly valued by employers, as it demonstrates the candidate's expertise in network security and their commitment to professional development.
Cisco 300-710 Exam is a computer-based exam that consists of 60-70 multiple-choice questions. 300-710 exam duration is 90 minutes, and the passing score is typically around 70%. Candidates can take the exam at any Pearson VUE testing center worldwide. 300-710 exam fee is $300, and candidates can register for the exam on the Cisco website.
300-710 Certification Exam Infor - Practice Test 300-710 Fee300-710 study material is suitable for all people. Whether you are a student or an office worker, whether you are a veteran or a rookie who has just entered the industry, 300-710 test answers will be your best choice. For office workers, 300-710 test dumps provide you with more flexible study time. You can download learning materials to your mobile phone and study at anytime, anywhere. And as an industry rookie, those unreadable words and expressions in professional books often make you feel mad, but 300-710 Study Materials will help you to solve this problem perfectly. Cisco Securing Networks with Cisco Firepower Sample Questions (Q18-Q23):NEW QUESTION # 18
Refer to the exhibit. A Cisco Secure Firewall Threat Defense (FTD) device is deployed in inline mode with an inline set. The network engineer wants router R2 to remove the directly connected route 192.168.1.0/24 from its routing table when the cable between routed R1 and the Secure FTD device Is disconnected. Which action must the engineer take?
A. Establish a routing protocol between R1 and R2.
B. Implement the Propagate Link Stale option on the Secure FTD device
C. Disable hardware bypass on the Secure FTD device.
D. Implement autostate functionality on the Gi0/2 interface of R2
Answer: B
Explanation:
To ensure that router R2 removes the directly connected route for 192.168.1.0/24 from its routing table when the cable between router R1 and the Secure FTD device is disconnected, the network engineer must implement the "Propagate Link State" option on the Secure FTD device. This option allows the FTD to propagate the link state changes to adjacent devices, ensuring that the disconnection is recognized and the routing table is updated accordingly.
Steps:
Access the FTD device configuration via FMC.
Navigate to the interface settings for the relevant interfaces.
Enable the "Propagate Link State" option for the interfaces connected to R1 and R2.
Deploy the changes to the FTD device.
This configuration ensures that the link state changes are communicated to router R2, prompting it to remove the disconnected route from its routing table.
NEW QUESTION # 19
An organization must be able to ingest NetFlow traffic from their Cisco FTD device to Cisco Stealthwatch for behavioral analysis.
What must be configured on the Cisco FTD to meet this requirement?
A. variable set object for NetFlow
B. security intelligence object for NetFlow
C. flexconfig object for NetFlow
D. interface object to export NetFlow
Answer: C
Explanation:
Step 4. Configure the Netflow Destination
In order to configure the Netflow Destination, navigate to Objects > FlexConfig > FlexConfig Objects https://www.cisco.com/c/en/us/su ... w/216126-configure- netflow-secure-event-logging-o.html#anc14
NEW QUESTION # 20
An engineer is configuring a cisco FTD appliance in IPS-only mode and needs to utilize fail-to-wire interfaces.
Which interface mode should be used to meet these requirements?
NEW QUESTION # 21
A network engineer implements a new Cisco Firepower device on the network to take advantage of its intrusion detection functionality. There is a requirement to analyze the traffic going across the device, alert on any malicious traffic, and appear as a bump in the wire How should this be implemented?
A. Enable routing on the Cisco Firepower
B. Configure a bridge group in transparent mode.
C. Add an IP address to the physical Cisco Firepower interfaces.
D. Specify the BVl IP address as the default gateway for connected devices.
Answer: B
Explanation:
Explanation
Traditionally, a firewall is a routed hop and acts as a default gateway for hosts that connect to one of its screened subnets. A transparent firewall, on the other hand, is a Layer 2 firewall that acts like a "bump in the wire," or a "stealth firewall," and is not seen as a router hop to connected devices. However, like any other firewall, access control between interfaces is controlled, and all of the usual firewall checks are in place. Layer
2 connectivity is achieved by using a "bridge group" where you group together the inside and outside interfaces for a network, and the ASA uses bridging techniques to pass traffic between the interfaces. Each bridge group includes a Bridge Virtual Interface (BVI) to which you assign an IP address on the network. You can have multiple bridge groups for multiple networks. In transparent mode, these bridge groups cannot communicate with each other. https://www.cisco.com/c/en/us/td ... l-config/intro-fw.h
NEW QUESTION # 22
An engineer is troubleshooting connectivity to the DNS servers from hosts behind a new Cisco FTD device. The hosts cannot send DNS queries to servers in the DMZ. Which action should the engineer take to troubleshoot this issue using the real DNS packets?
A. Use the show blocks command in the Threat Defense CLI tool and create a policy to allow the blocked traffic.
B. Use the packet capture tool to check where the traffic is being blocked and adjust the access control or intrusion policy as needed.
C. Use the packet tracer tool to determine at which hop the packet is being dropped.
D. Use the Connection Events dashboard to check the block reason and adjust the inspection policy as needed.
Answer: D
NEW QUESTION # 23
......
We apply international recognition third party for the payment of 300-710 exam dumps, and your money and account will be safe if you choose us. And the third party will protest the interests of you. What¡¯s more, free demo is available for 300-710 training materials, and you can have a try before buying, so that you can know what the complete version is like. We also pass guarantee and money back guarantee. You just need to send us the failure scanned, and we will give you full refund. We have online chat service, and if you have any questions for 300-710 Training Materials, you can consult us. 300-710 Certification Exam Infor: https://www.vcetorrent.com/300-710-valid-vce-torrent.html
