最好的EDGE-Expert最新題庫資源 & 可靠的EDGE-Expert考題寶典很多新人剛進入公司就聽說，每個月都會有 EDGE 證照考試，如果過了，年底有獎金的發放，根據你完成證照的情況，才完成獎金的分配。然而對於沒有參加過任何證照考試的新人來說，是一次不錯挑戰。Fast2test 剛剛更新的 EDGE EDGE-Expert 擬真試題剛好可以幫助很多新人，如果你正在準備 EDGE EDGE-Expert 考試的話，可以利用我們最新的擬真試題仔細地複習備考了。因為最新的 EDGE-Expert 擬真試題可以為你的複習和看書減輕很多的煩惱。 最新的 GBCI EDGE EDGE-Expert 免費考試真題 (Q66-Q71):問題 #66
Which of the following must be included in the EDGE Auditor submission for Preliminary Certification?
A. All of the available design data.
B. Compliance documents for selected measures.
C. The Chapter 5 EDGE certification protocol.
D. The design audit site visit results verified by the EDGE Auditor.
答案：B
解題說明：
The EDGE Auditor's submission for Preliminary Certification (design stage) must include specific elements to support the recommendation for certification. The EDGE Certification Protocol specifies: "For Preliminary Certification, the EDGE Auditor's submission must include compliance documents for the selected measures, such as drawings, specifications, and manufacturer's data sheets, which verify that the design aligns with the self-assessment in the EDGE software. These documents are reviewed by the Certification Provider to confirm eligibility" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, compliance documents for selected measures, directly matches this requirement. Option A (all available design data) is too broad and not required: "Only documents directly related to the selected measures are needed, not all design data" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option B (Chapter 5 EDGE certification protocol) is incorrect, as this refers to the protocol document itself, not a submission component:
"The certification protocol is a reference, not part of the Auditor's submission" (EDGE Certification Protocol, Section 1.1: Overview). Option D (design audit site visit results) is incorrect, as site visits are not required at the design stage: "Preliminary Certification is based on a desk audit, not a site visit, which occurs at the post- construction stage" (EDGE Certification Protocol, Section 3.3: Certification Decision). Thus, compliance documents (Option C) are required in the submission.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision, Section 1.1: Overview.
問題 #67
Which of the following can deliver the highest efficiency in fans and pumps?
A. Variable speed drive
B. Single speed drive
C. Constant speed drive
D. Two speed drive
答案：A
解題說明：
Efficiency in fans and pumps is a critical aspect of green building design in EDGE, particularly for reducing energy consumption in HVAC systems. The EDGE User Guide provides detailed guidance on efficiency measures for mechanical systems: "Variable speed drives (VSDs) deliver the highest efficiency in fans and pumps by adjusting the motor speed to match the actual demand, significantly reducing energy consumption compared to fixed-speed systems. VSDs can achieve energy savings of up to 30-50% in HVAC applications by avoiding the constant operation at full speed typical of single or constant speed drives" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option D, variable speed drive, aligns with this description as the most efficient option. Option A (two speed drive) offers some efficiency by allowing two operating speeds, but it is less flexible than VSDs: "Two speed drives provide limited efficiency gains, as they cannot continuously adjust to varying loads, unlike variable speed drives" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option B (single speed drive) and Option C (constant speed drive) are essentially the same in this context, operating at a fixed speed regardless of demand, leading to energy waste: "Single speed or constant speed drives run at a fixed rate, resulting in higher energy consumption compared to variable speed drives, which modulate speed based on need" (EDGE User Guide, Section 4.2:
Energy Efficiency Measures). The EDGE Methodology Report further elaborates: "Variable speed drives are the most efficient option for fans and pumps in EDGE, as they minimize energy use by matching output to demand, unlike two speed or constant speed drives, which operate inefficiently under partial loads" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). This makes variable speed drives (Option D) the clear choice for delivering the highest efficiency in fans and pumps.
Reference:EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics.
問題 #68
A building achieved EDGE certification three years ago and obtained 30% energy savings. Solar panels have been added, which increased the energy savings to 60%. If carbon offsets are purchased for the remainder of the energy use, when should an EDGE Zero Carbon certification application be filed?
A. At the same time as the EDGE Advanced certification and only after gathering two years of operational data
B. No wait time required as the project is already EDGE certified
C. As soon as one year of operational data can be provided
D. After achieving EDGE Advanced certification and gathering one year of operational data
答案：D
解題說明：
EDGE Zero Carbon certification requires specific prerequisites and operational data to verify performance.
The EDGE Certification Protocol details the requirements: "To apply for EDGE Zero Carbon certification, a project must first achieve EDGE Advanced certification, which requires at least 40% energy savings.
Additionally, EDGE Zero Carbon certification mandates at least one year of operational data at 75% occupancy to confirm energy performance, after which carbon offsets can be purchased for the remaining energy use to achieve zero carbon status" (EDGE Certification Protocol, Section 2.3: Certification Levels). In this scenario, the building's energy savings have increased to 60% with solar panels, qualifying it for EDGE Advanced (40% minimum). The next step is to gather one year of operational data before applying for EDGE Zero Carbon, making Option C (after achieving EDGE Advanced certification and gathering one year of operational data) correct. Option A (as soon as one year of operational data) skips the EDGE Advanced requirement: "EDGE Advanced is a prerequisite for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option B (no wait time) is incorrect, as operational data is mandatory:
"Operational data is required to verify performance for Zero Carbon certification" (EDGE User Guide, Section 6.3: Advanced Certifications). Option D (at the same time as EDGE Advanced and after two years) is wrong, as only one year of data is needed: "One year of operational data at 75% occupancy is sufficient for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Thus, Option C is the correct timeline.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications.
問題 #69
Which of the following is NOT an option for insulation in materials efficiency measures?
A. Polystyrene
B. Polyurethane
C. Mineral wool
D. Polypropylene
答案：D
解題說明：
Insulation materials in EDGE are evaluated for their thermal performance and embodied energy as part of materials efficiency measures. The EDGE User Guide lists common insulation options: "In EDGE, insulation materials for walls, roofs, and floors include mineral wool, polyurethane,polystyrene, and fiberglass, which are selected for their low thermal conductivity and availability in most markets" (EDGE User Guide, Section
7.2: Materials Efficiency Measures). Options A (mineral wool), B (polyurethane), and D (polystyrene) are explicitly mentioned as insulation materials in EDGE. Option C, polypropylene, is not listed as an insulation material, as confirmed by the EDGE Methodology Report: "Polypropylene is a plastic material often used in packaging or pipes, but it is not recognized in EDGE as an insulation material due to its poor thermal resistance compared to standard insulation options like polystyrene or polyurethane" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). The EDGE software's material database further excludes polypropylene from insulation options, focusing instead on materials with established thermal properties for building envelopes. Thus, polypropylene (Option C) is not an insulation option in EDGE.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
問題 #70
Which of the following measures will impact energy, water, and materials in an air-conditioned hospital with a water-cooled chiller?
A. Insulation of the roof
B. Water-efficient dishwashers
C. Water-efficient urinals
D. Variable speed drive pumps
答案：D
解題說明：
In EDGE, measures are evaluated for their impact on energy, water, and embodied energy in materials, the three core pillars of the standard. For an air-conditioned hospital with a water-cooled chiller, the measure must affect all three areas to be the correct answer. The EDGE User Guide provides detailed descriptions of each measure's impact: "Variable speed drive (VSD) pumps in HVAC systems, such as those used in water- cooled chillers, impact energy by reducing electricity consumption through load modulation, water by optimizing the chiller's cooling water circulation (reducing water use in the cooling tower), and materials because their installation may involve additional components with embodied energy, such as the VSD unit itself" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option C, variable speed drive pumps, thus impacts all three areas: energy (reduced electricity use), water (less cooling tower water loss), and materials (embodied energy in the VSD equipment). Option A (insulation of the roof) affects energy (reduced cooling load) and materials (embodied energy in insulation), but not water: "Roof insulation reduces energy demand but does not directly impact water consumption" (EDGE User Guide, Section 4.1: Insulation Measures). Option B (water-efficient urinals) impacts water (reduced consumption) and potentially materials (embodied energy in fixtures), but not energy: "Water-efficient urinals save water but have no direct energy impact in EDGE calculations" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option D (water- efficient dishwashers) also affects water and materials, but not energy in this context: "Water-efficient dishwashers reduce water use, but their energy impact is minimal unless they include hot water savings, which is not specified for hospital dishwashers in EDGE" (EDGE Methodology Report Version 2.0, Section
4.2: Water Savings Calculations). The EDGE Methodology Report further confirms: "VSD pumps in water- cooled chillers are unique in affecting all three EDGE metrics-energy through efficiency, water through reduced cooling tower evaporation, and materials through the embodied energy of the equipment" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Thus, variable speed drive pumps (Option C) is the measure impacting energy, water, and materials.
Reference:EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.1: Insulation Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1:
Energy Efficiency Metrics, Section 4.2: Water Savings Calculations.